Electromechanical modeling and experimental analysis of a compression-based piezoelectric vibration energy harvester

Over the past few decades, wireless sensor networks have been widely used in the field of structure health monitoring of civil, mechanical, and aerospace systems. Currently, most wireless sensor networks are battery-powered and it is costly and unsustainable for maintenance because of the requirement for frequent battery replacements. As an attempt to address such issue, this article theoretically and experimentally studies a compression-based piezoelectric energy harvester using a multilayer stack configuration, which is suitable for civil infrastructure system applications where large compressive loads occur, such as heavily vehicular loading acting on pavements. In this article, we firstly present analytical and numerical modeling of the piezoelectric multilayer stack under axial compressive loading, which is based on the linear theory of piezoelectricity. A two-degree-of-freedom electromechanical model, considering both the mechanical and electrical aspects of the proposed harvester, was developed to characterize the harvested electrical power under the external electrical load. Exact closed-form expressions of the electromechanical models have been derived to analyze the mechanical and electrical properties of the proposed harvester. The theoretical analyses are validated through several experiments for a test prototype under harmonic excitations. The test results exhibit very good agreement with the analytical analyses and numerical simulations for a range of resistive loads and input excitation levels. © 2014 The Author(s)

Quality of care in patients with diabetic kidney disease in Asia: The Joint Asia Diabetes Evaluation (JADE) Registry

Aims: Diabetic kidney disease independently predicts cardiovascular disease and premature death. We examined the burden of chronic kidney disease (CKD, defined as an estimated GFR < 60 ml/min/1.73 m2) and quality of care in a cross-sectional survey of adults (age ≥ 18 years) with Type 2 diabetes across Asia. Methods: The Joint Asia Diabetes Evaluation programme is a disease-management programme implemented using an electronic portal that systematically captures clinical characteristics of all patients enrolled. Between July 2007 and December 2012, data on 28 110 consecutively enrolled patients (China: 3415, Hong Kong: 15 196, India: 3714, Korea: 1651, Philippines: 3364, Vietnam: 692, Taiwan: 78) were analysed. Results: In this survey, 15.9% of patients had CKD, 25.0% had microalbuminuria and 12.5% had macroalbuminuria. Patients with CKD were less likely to achieve HbA1c < 53 mmol/mol (7.0%) (36.0% vs. 42.3%) and blood pressure < 130/80 mmHg (20.8% vs. 35.3%), and were more likely to have retinopathy (26.2% vs. 8.7%), sensory neuropathy (29.0% vs. 7.7%), cardiovascular disease (26.6% vs. 8.7%) and self-reported hypoglycaemia (18.9% vs. 8.2%). Despite high frequencies of albuminuria (74.8%) and dyslipidaemia (93.0%) among CKD patients, only 49.0% were using renin–angiotensin system inhibitors and 53.6% were on statins. On logistic regression, old age, male gender, tobacco use, long disease duration, high HbA1c, blood pressure and BMI, and low LDL cholesterol were independently associated with CKD (all P < 0.05). Conclusions: The poor control of risk factors, suboptimal use of organ-protective drugs and high frequencies of hypoglycaemia highlight major treatment gaps in patients with diabetic kidney disease in Asia.postprin

Superconductivity of ultra-fine tungsten nanowires grown by focused-ion-beam direct-writing

The electrical properties of lateral ultra-fine tungsten nanowires, which were grown by focused-ion-beam-induced deposition with 1 pA ion-beam current, were investigated. Temperature-dependent electrical measurements show that the wires are conducting and have a superconducting transition with a transition temperature (T-c) about 5.1 K. Resistance vs. temperature measurements reveal that, with decreasing cross-sectional area, the wires display an increasingly broad superconducting transition. A residual resistive tail extending down to the low-temperature region is found only for the thinnest tungsten nanowire, which is 10 nm thick and 19 nm wide. The logarithm of the residual resistance of this wire appears as two linear sections as a function of temperature, one within 300 mK below T-c and the other extending down to the lowest measuring temperature of 4.26 K. Such features have previously been identified with phase slip processes. Our results are suggestive that the focused-ion-beam technique might be a potential approach to fabricate ultra-thin and ultra-narrow nanowires for the study of superconducting suppression in nanoscale materials and for maskless superconducting device fabrication. (C) 2011 Elsevier B.V. All rights reserved

Study of psi(2S) decays to X J/psi

Using J/psi -> mu^+ mu^- decays from a sample of approximately 4 million psi(2S) events collected with the BESI detector, the branching fractions of psi(2S) -> eta J/psi, pi^0 pi^0 J/psi, and anything J/psi normalized to that of psi(2S) -> pi^+ pi^- J/psi are measured. The results are B(psi(2S) -> eta J/psi)/B(psi(2S) -> pi^+ pi^- J/psi) = 0.098 \pm 0.005 \pm 0.010, B(psi(2S) -> pi^0 pi^0 J/psi)/B(psi(2S) -> pi^+ pi^- J/psi) = 0.570 \pm 0.009 \pm 0.026, and B(psi(2S) -> anything J/psi)/B(psi(2S) -> pi^+ pi^- J/psi) = 1.867 \pm 0.026 \pm 0.055.Comment: 13 pages, 8 figure

Eyelid and Sternum Fibroblasts Differ in Their Contraction Potential and Responses to Inflammatory Cytokines

BACKGROUND: Adverse skin scarring varies by anatomical site with, for example, presternal skin showing a greater hypertrophic response when compared with eyelid; such differences have traditionally been attributed to regional variations in skin tension, thickness, and Langer's lines. Fibroblasts are the main cell implicated in fibrosis, and they too are known to show anatomical variation in their expression, differentiation, and intercellular interactions. We, therefore, investigated whether intrinsic differences in skin fibroblasts derived from separate locations might contribute to the observed discrepancies in clinical scarring. METHODS: Primary in vitro cultures were established using matched eyelid and presternal skin from 3 healthy donors undergoing blepharoplasty surgery. We used an in vitro collagen gel model of fibroblast-mediated tissue contraction to compare the properties of the dermal fibroblasts from each site. Cell contractile force and matrix stiffness were assessed in 3-dimensional tissue constructs using an automated high-throughput device. RESULTS: Dermal fibroblasts isolated from eyelid and sternum differ both in their ability to contract a gel matrix and in their response to cytokine stimulation; despite having lower intrinsic contractile force (P < 0.01) and resting stiffness (P < 0.02), the presternal cells were more contractile (P < 0.001) following stimulation with serum, or inflammatory cytokines transforming growth factor-β (P < 0.01) and interleukin-1β (P < 0.05). CONCLUSIONS: The propensity to cutaneous scarring may, at least in part, result from intrinsic differences in the local fibroblasts' ability to contract and their sensitivity to inflammatory cytokines. Improved understanding of the underlying molecular pathways should prove useful in identifying new therapeutic targets for altering surgical and other scarring

First observation of psi(2S)-->K_S K_L

The decay psi(2S)-->K_S K_L is observed for the first time using psi(2S) data collected with the Beijing Spectrometer (BESII) at the Beijing Electron Positron Collider (BEPC); the branching ratio is determined to be B(psi(2S)-->K_S K_L) = (5.24\pm 0.47 \pm 0.48)\times 10^{-5}. Compared with J/psi-->K_S K_L, the psi(2S) branching ratio is enhanced relative to the prediction of the perturbative QCD ``12%'' rule. The result, together with the branching ratios of psi(2S) decays to other pseudoscalar meson pairs (\pi^+\pi^- and K^+K^-), is used to investigate the relative phase between the three-gluon and the one-photon annihilation amplitudes of psi(2S) decays.Comment: 5 pages, 4 figures, 2 tables, submitted to Phys. Rev. Let

Laser-driven acceleration of quasi-monoenergetic, near-collimated titanium ions via a transparency-enhanced acceleration scheme

Laser-driven ion acceleration has been an active research area in the past two decades with the prospects of designing novel and compact ion accelerators. Many potential applications in science and industry require high-quality, energetic ion beams with low divergence and narrow energy spread. Intense laser ion acceleration research strives to meet these challenges and may provide high charge state beams, with some successes for carbon and lighter ions. Here we demonstrate the generation of well collimated, quasi-monoenergetic titanium ions with energies ∼145 and 180 MeV in experiments using the high-contrast(&lt;10-9) and high-intensity (6× 1020 W cm-2) Trident laser and ultra-Thin (∼100 nm) titanium foil targets. Numerical simulations show that the foils become transparent to the laser pulses, undergoing relativistically induced transparency (RIT), resulting in a two-stage acceleration process which lasts until ∼2 ps after the onset of RIT. Such long acceleration time in the self-generated electric fields in the expanding plasma enables the formation of the quasi-monoenergetic peaks. This work contributes to the better understanding of the acceleration of heavier ions in the RIT regime, towards the development of next generation laser-based ion accelerators for various applications

A multicentre demonstration project to evaluate the effectiveness and acceptability of the web-based Joint Asia Diabetes Evaluation (JADE) programme with or without nurse support in Chinese patients with Type 2 diabetes

postprin

A vibration-based approach for the estimation of the loss of composite action in timber composite systems

This paper presents a novel approach for the determination of the loss of composite action for timber composite systems using only measurements from non-destructive vibration testing. Traditionally, the composite action of a system is evaluated from static load testing using deflection measurements. However, static load testing is expensive, time consuming and inappropriate for existing flooring systems. The method proposed in this paper is based on the Damage Index (DI) method, which uses changes in modal strain energies, to detect locations and severities of damage. In the proposed method, a new Loss of Composite Action Index (LCAI), which is derived from direct mode shape measurements obtained from dynamic testing, is introduced to evaluate the loss of composite action. The proposed method is tested and validated on numerical and experimental models of a timber composite beam structure, which consists of two timber components that are connected with different numbers of screws to simulate various degrees of partial composite states. The results obtained from the new method are very encouraging and show a clear trend of the proposed dynamic-based LCAI in indicating the loss of composite action in the investigated timber composite structure. © (2013) Trans Tech Publicutions, Switzerland