Photofission and Quasi-Deuteron-Nuclear State as Mixing of Bosons and Fermions

The empirical-phenomenological quasi-deuteron photofission description is theoretically justified within the semiclassical, intermediate statistics model. The transmutational fermion (nucleon) - boson (quasi-deuteron) potential plays an essential role in the present context and is expressed in terms of thermodynamical and of microscopical quantities, analogous to those commonly used in the superfluid nuclear model.Comment: 7 pages, RevTex, to appear in Zeit. f. Phys.

Transmission fiber chromatic dispersion dependence on temperature: implications on 40 Gb/s performance

In this letter we will evaluate the performance degradation of a 40 km high-speed (40 Gb/s) optical System, induced by optical fiber variations of the chromatic dispersion induced by temperature changes. The chromatic dispersion temperature sensitivity will be estimated based on the signal quality parameters

Association between congenital toxoplasmosis and preterm birth, low birthweight and small for gestational age birth.

OBJECTIVE: To determine the association between congenital toxoplasmosis and preterm birth, low birthweight and small for gestational age birth. DESIGN: Multicentre prospective cohort study. SETTING: Ten European centres offering prenatal screening for toxoplasmosis. POPULATION: Deliveries after 23 weeks of gestation in 386 women with singleton pregnancies who seroconverted to toxoplasma infection before 20 weeks of gestation. Deliveries after 36 weeks in 234 women who seroconverted at 20 weeks or later, and tested positive before 37 weeks. METHODS: Comparison of infected and uninfected births, adjusted for parity and country of birth. MAIN OUTCOME MEASURES: Differences in gestational age at birth, birthweight and birthweight centile. RESULTS: Infected babies were born or delivered earlier than uninfected babies: the mean difference for seroconverters before 20 weeks was -5.4 days (95% CI: -1.4, -9.4), and at 20 weeks or more, -2.6 days (95% CI: -0.5, -4.7). Congenital infection was associated with an increased risk of preterm delivery when seroconversion occurred before 20 weeks (OR 4.71; 95% CI: 2.03, 10.9). No significant differences were detected for birthweight or birthweight centile. CONCLUSION: Babies with congenital toxoplasmosis were born earlier than uninfected babies but the mechanism leading to shorter length of gestation is unknown. Congenital infection could precipitate early delivery or prompt caesarean section or induction of delivery. We found no evidence for a significant association between congenital toxoplasmosis and reduced birthweight or small for gestational age birth

The role of evolutive elastic properties in the performance of a sheet formed spring applied in multimedia car industry

The manufacturing process and the behavior of a sheet formed spring manufactured from an aluminum sheet is described and investigated in this work considering the specifications for the in-service conditions. The sheet formed spring is intended to be applied in car multimedia industry to replace bolted connections. Among others, are investigated the roles of the constitutive parameters and the hypothesis of evolutive elastic properties with the plastic work in the multi-step forming process and in working conditions.This research was sponsored by:a) Portugal Incentive System for Research and Technological Development. Project in co-promotion no 36265/2013 (Project HMIExcel - 2013-2015), andb) FCT with the reference project UID/EEA/04436/2013, by FEDER funds through the COMPETE 2020 - Programa Operacional Competitividade e Internacionalizacao (POCI) with the reference project POCI-01-0145-FEDER-006941.info:eu-repo/semantics/publishedVersio

Substrate-induced band gap opening in epitaxial graphene

Graphene has shown great application potentials as the host material for next generation electronic devices. However, despite its intriguing properties, one of the biggest hurdles for graphene to be useful as an electronic material is its lacking of an energy gap in the electronic spectra. This, for example, prevents the use of graphene in making transistors. Although several proposals have been made to open a gap in graphene's electronic spectra, they all require complex engineering of the graphene layer. Here we show that when graphene is epitaxially grown on the SiC substrate, a gap of ~ 0.26 is produced. This gap decreases as the sample thickness increases and eventually approaches zero when the number of layers exceeds four. We propose that the origin of this gap is the breaking of sublattice symmetry owing to the graphene-substrate interaction. We believe our results highlight a promising direction for band gap engineering of graphene.Comment: 10 pages, 4 figures; updated reference

Produção orgânica de rabanete em plantio direto sobre cobertura morta e viva.

O objetivo deste trabalho foi avaliar o uso de plantas espontâneas e cobertura viva de amendoim forrageiro(Arachis pintoi), associado à aplicação de composto orgânico na produção orgânica do rabanete em plantio direto. O experimento foi instalado na Universidade Federal do Acre, em Rio Branco-AC, de 15/06 a 14/07/2007. O delineamento experimental utilizado foi em blocos casualizados com parcelas subdivididas 4x3, em quatro repetições. As parcelas corresponderam ao sistema de plantio direto com cobertura viva de amendoim forrageiro, cobertura viva de planta espontânea, cobertura morta de planta espontânea e sistema de plantio em canteiro com solo descoberto. As subparcelas foram compostas pelas doses de composto orgânico de 5, 10 e 15 t ha-1 (base seca). O plantio direto na palha de plantas espontâneas teve desempenho semelhante ao preparo convencional do solo, ambos superiores ao plantio sobre as coberturas vivas. A produtividade do rabanete cv. Cometo, não foi afetada pelas doses crescentes de composto orgânico, podendo aplicar-se apenas 5 t ha-1, enquanto em preparo convencional do solo, o aumento da produtividade ultrapassa o plantio direto na palha apenas na dose maior de composto (15 t ha-1)

Neutron Stars in Teleparallel Gravity

In this paper we deal with neutron stars, which are described by a perfect fluid model, in the context of the teleparallel equivalent of general relativity. We use numerical simulations to find the relationship between the angular momentum of the field and the angular momentum of the source. Such a relation was established for each stable star reached by the numerical simulation once the code is fed with an equation of state, the central energy density and the ratio between polar and equatorial radii. We also find a regime where linear relation between gravitational angular momentum and moment of inertia (as well as angular velocity of the fluid) is valid. We give the spatial distribution of the gravitational energy and show that it has a linear dependence with the squared angular velocity of the source.Comment: 19 pages, 14 figures. arXiv admin note: text overlap with arXiv:1206.331

Lattice Boltzmann simulations in microfluidics: probing the no-slip boundary condition in hydrophobic, rough, and surface nanobubble laden microchannels

In this contribution we review recent efforts on investigations of the effect of (apparent) boundary slip by utilizing lattice Boltzmann simulations. We demonstrate the applicability of the method to treat fundamental questions in microfluidics by investigating fluid flow in hydrophobic and rough microchannels as well as over surfaces covered by nano- or microscale gas bubbles.Comment: 11 pages, 6 figure

Simulations of extensional flow in microrheometric devices

We present a detailed numerical study of the flow of a Newtonian fluid through microrheometric devices featuring a sudden contraction–expansion. This flow configuration is typically used to generate extensional deformations and high strain rates. The excess pressure drop resulting from the converging and diverging flow is an important dynamic measure to quantify if the device is intended to be used as a microfluidic extensional rheometer. To explore this idea, we examine the effect of the contraction length, aspect ratio and Reynolds number on the flow kinematics and resulting pressure field. Analysis of the computed velocity and pressure fields show that, for typical experimental conditions used in microfluidic devices, the steady flow is highly three-dimensional with open spiraling vortical structures in the stagnant corner regions. The numerical simulations of the local kinematics and global pressure drop are in good agreement with experimental results. The device aspect ratio is shown to have a strong impact on the flow and consequently on the excess pressure drop, which is quantified in terms of the dimensionless Couette and Bagley correction factors. We suggest an approach for calculating the Bagley correction which may be especially appropriate for planar microchannels

Assessement of tensile strength of graphites by the iosipescu coupon test

Polycrystalline graphites are widely used in the metallurgical, nuclear and aerospace industries. Graphites are particulated composites manufactured with a mixture of coke with pitch, and changes in relative proportions of these materials cause modifications in their mechanical properties. Uniaxial tension tests must be avoided for mechanical characterization in this kind of brittle material, due to difficulties in making the relatively long specimens and premature damages caused during testing set-up. On other types of tests, e.g. bending tests, the specimens are submitted to combined stress states (normal and transverse shear stresses). The Iosipescu shear test, is performed in a beam with two 90° opposite notches machined at the mid-length of the specimens, by applying two forces couples, so that a pure and uniform shear stress state is generated at the cross section between the two notches. When a material is isotropic and brittle, a failure at 45° in relation to the beam long axis can take place, i.e., the tensile normal stress acts parallel to the lateral surface of the notches, controls the failure and the result of the shear test is numerically equivalent to the tensile strength. This work has evaluated a graphite of the type used in rocket nozzles by the Iosipescu test and the resulted stress, ~11 MPa, was found to be equal to the tensile strength. Thus, the tensile strength can be evaluated just by a single and simple experiment, thus avoiding complicated machining of specimen and testing set-up