Performance of an Anode Supported Solid Oxide Fuel Cell with Indirect Internal Reforming

The conversion of fuel into hydrogen-rich gas is necessary for fuel cells. This can be achieved either indirectly in fuel processing systems, in which the hydrocarbon feed is converted in an external catalytic steam reformer, or directly in the fuel cell. In this paper, the unit module of solid oxide fuel cell was assembled by one reformer and four cells. The reformer was fabricated by extruded dummy cell and combined with two cells on each side respectively. The reforming catalyst was coated on internal channel of the dummy cell. The unit module has successfully tested with wet CH4 as fuel and air as oxidant and its maximum power density exceeded 150mW/cm(2) at 750 degrees C.open110Nsciescopu

Preliminary Studies about Synthesis and Electrical Properties of Ruthenium Doped Lanthanum Strontium Titanate as a Potential Anode of Solid Oxide Fuel Cells

The lanthanum strontium titanate (LST) is one of the most representative alternative anode materials. Although it shows low catalytic properties, the disadvantage could be improved by doping of ruthenium which is widely used as catalyst under steam reforming reaction or oxidation reaction. The ruthenium doped lanthanum strontium titanates (LSTRs) powders were synthesized by complex EDTA-citrate method showing well crystallinity. Additionally, the prepared samples were evaluated through various experimental tests. For example, the stability in the reducing atmosphere and chemical compatibility with YSZ electrolyte such as reactivity test in high temperature were confirmed by XRD (X-ray diffraction). And electrical conductivity in wet H-2 atmosphere at 900 degrees C is about 350.6 S/cm, 342.4 S/cm and 179.1 S/cm with sintered bar of LST, LSTR0.02 and LSTR0.05, respectively.open1111Nsciescopu

Design and Fabrication of Electrolyte-Supported Tubular SOFC Combined with Supercritical Water Oxidation on Biomass Gas

Solid oxide fuel cells (SOFCs) are relatively simple and environmental friendly devices for the production of electricity from hydrocarbons. The use of a high pressure supercritical water (SCW) reactor containing a SOFC has the potential for using a multitude of logistical liquid fuels that would otherwise not be possible in a regular SOFC system. A SOFC-SCW system was designed to allow the anode to be exposed to the pressure and chemical milieu of the supercritical water oxidation reactor. The effects of the amount of water/fuel and oxygen fed into the reactor under SCW conditions at 400 degrees C were studied. The effects on electrochemical performance as well as preliminary results on a number of feed stocks, for example pectin, are also described.open1111Nsciescopu

Zero-shot keyword spotting for visual speech recognition in-the-wild

Visual keyword spotting (KWS) is the problem of estimating whether a text query occurs in a given recording using only video information. This paper focuses on visual KWS for words unseen during training, a real-world, practical setting which so far has received no attention by the community. To this end, we devise an end-to-end architecture comprising (a) a state-of-the-art visual feature extractor based on spatiotemporal Residual Networks, (b) a grapheme-to-phoneme model based on sequence-to-sequence neural networks, and (c) a stack of recurrent neural networks which learn how to correlate visual features with the keyword representation. Different to prior works on KWS, which try to learn word representations merely from sequences of graphemes (i.e. letters), we propose the use of a grapheme-to-phoneme encoder-decoder model which learns how to map words to their pronunciation. We demonstrate that our system obtains very promising visual-only KWS results on the challenging LRS2 database, for keywords unseen during training. We also show that our system outperforms a baseline which addresses KWS via automatic speech recognition (ASR), while it drastically improves over other recently proposed ASR-free KWS methods.Comment: Accepted at ECCV-201

Colored Non-Crossing Euclidean Steiner Forest

Given a set of $k$-colored points in the plane, we consider the problem of finding $k$ trees such that each tree connects all points of one color class, no two trees cross, and the total edge length of the trees is minimized. For $k=1$, this is the well-known Euclidean Steiner tree problem. For general $k$, a $k\rho$-approximation algorithm is known, where $\rho \le 1.21$ is the Steiner ratio. We present a PTAS for $k=2$, a $(5/3+\varepsilon)$-approximation algorithm for $k=3$, and two approximation algorithms for general~$k$, with ratios $O(\sqrt n \log k)$ and $k+\varepsilon$

Postoperative irradiation after implant placement: A pilot study for prosthetic reconstruction

published_or_final_versio

Kinetic roughening of ion-sputtered Pd(001) surface: Beyond the Kuramoto-Sivashinsky model

The kinetic roughening of Ar+ ion-sputtered Pd(001) surface was investigated. The facet formation on the sputtered surface was studied by tracing the extradiffraction peaks or satellites around the diffraction peaks corresponding to the sample surface. The morphological evolution of the sputtered Pd(001) surface was also investigated by an scanning tunneling microscopy (STM). It was shown that the nanoscale adatom islands form and grow with increasing sputter time.open313

Cathodic bacterial community structure applying the different co-substrates for reductive decolorization of Alizarin Yellow R

Selective enrichment of cathodic bacterial community was investigated during reductive decolorization of AYR fedding with glucose or acetate as co-substrates in biocathode. A clear distinction of phylotype structures were observed between glucose-fed and acetate-fed biocathodes. In glucose-fed biocathode, Citrobacter (29.2%), Enterococcus (14.7%) and Alkaliflexus (9.2%) were predominant, and while, in acetate-fed biocathode, Acinetobacter (17.8%) and Achromobacter (6.4%) were dominant. Some electroactive or reductive decolorization genera, like Pseudomonas, Delftia and Dechloromonas were commonly enriched. Both of the higher AYR decolorization rate (k(AYR) = 0.46) and p-phenylenediamine (PPD) generation rate (k(PPD) = 0.38) were obtained fed with glucose than acetate (k(AYR) = 0.18; k(PPD) = 0.16). The electrochemical behavior analysis represented a total resistance in glucose-fed condition was about 73.2% lower than acetate-fed condition. The different co-substrate types, resulted in alteration of structure, richness and composition of bacterial communities, which significantly impacted the performances and electrochemical behaviors during reductive decolorization of azo dyes in biocathode. (C) 2016 Elsevier Ltd. All rights reserved.11116Ysciescopu

Identification of hip fracture patients from radiographs using Fourier analysis of the trabecular structure: a cross-sectional study

Peer reviewedPublisher PD

Anti-Allergic Cromones Inhibit Histamine and Eicosanoid Release from Activated Human and Murine Mast Cells by Releasing Annexin A1

PMCID: PMC3601088This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited