Ianus: an Adpative FPGA Computer

Dedicated machines designed for specific computational algorithms can outperform conventional computers by several orders of magnitude. In this note we describe {\it Ianus}, a new generation FPGA based machine and its basic features: hardware integration and wide reprogrammability. Our goal is to build a machine that can fully exploit the performance potential of new generation FPGA devices. We also plan a software platform which simplifies its programming, in order to extend its intended range of application to a wide class of interesting and computationally demanding problems. The decision to develop a dedicated processor is a complex one, involving careful assessment of its performance lead, during its expected lifetime, over traditional computers, taking into account their performance increase, as predicted by Moore's law. We discuss this point in detail

Focusing of geodesic congruences in an accelerated expanding Universe

We study the accelerated expansion of the Universe through its consequences on a congruence of geodesics. We make use of the Raychaudhuri equation which describes the evolution of the expansion rate for a congruence of timelike or null geodesics. In particular, we focus on the space-time geometry contribution to this equation. By straightforward calculation from the metric of a Robertson-Walker cosmological model, it follows that in an accelerated expanding Universe the space-time contribution to the Raychaudhuri equation is positive for the fundamental congruence, favoring a non-focusing of the congruence of geodesics. However, the accelerated expansion of the present Universe does not imply a tendency of the fundamental congruence to diverge. It is shown that this is in fact the case for certain congruences of timelike geodesics without vorticity. Therefore, the focusing of geodesics remains feasible in an accelerated expanding Universe. Furthermore, a negative contribution to the Raychaudhuri equation from space-time geometry which is usually interpreted as the manifestation of the attractive character of gravity is restored in an accelerated expanding Robertson-Walker space-time at high speeds.Comment: 11 pages, 2 figures. Final version changed to match published version in JCAP. References updated. Conclusions unchange

Corrosion and tribocorrosion behavior of Ti-Alumina composites

This work focus on the corrosion and wear properties of titanium reinforced with 1% wt. alumina particles, produced by a combination of colloidal techniques and powder metallurgy. The alumina particles were added to control the grain growth of titanium during sintering, and simultaneously to increase hardness and wear resistance. Colloidal techniques permitted a homogeneous dispersion of alumina particles on the surface of fine Ti particles by the formulation of stable aqueous suspensions that were further processed by spray-dry to obtain spherical granules with improved compressibility. Ti-Alumina samples were produced by uniaxial pressing of granules and vacuum sintering leading to materials with homogeneous microstructure, a reduction of grain size higher than 50 % with respect to pure titanium, and a sensible increase in hardness. But the addition of ceramic particles can also have an influence on the corrosion behavior that is one of the most interesting properties of titanium alloys, and on wear resistance, that is one of the drawbacks of Ti. Moreover, the study of simultaneous action of wear and corrosion (tribocorrosion) is an area of highest interest in applications like biomedical or automotive. The corrosion behavior was evaluated by Electrochemical Impedance Spectroscopy (EIS) and Potentiodynamic Polarization (PP) in NaCl at two concentrations (0.9 % and 3.5 %) and temperatures (37 °C, and room temperature). Tribocorrosion tests were performed using a reciprocating ball-on-plate tribometer where a 10 mm diameter alumina ball was used as counter material, and 10 N normal load was applied during 30 min in the same concentrations and temperatures of NaCl as in the static corrosion test s. The results showed a clear improvement of wear resistance on the composite without reducing the corrosion behavior in both conditions.(undefined)info:eu-repo/semantics/publishedVersio

Coupled dark energy: Towards a general description of the dynamics

In dark energy models of scalar-field coupled to a barotropic perfect fluid, the existence of cosmological scaling solutions restricts the Lagrangian of the field \vp to p=X g(Xe^{\lambda \vp}), where X=-g^{\mu\nu} \partial_\mu \vp \partial_\nu \vp /2, $\lambda$ is a constant and $g$ is an arbitrary function. We derive general evolution equations in an autonomous form for this Lagrangian and investigate the stability of fixed points for several different dark energy models--(i) ordinary (phantom) field, (ii) dilatonic ghost condensate, and (iii) (phantom) tachyon. We find the existence of scalar-field dominant fixed points (\Omega_\vp=1) with an accelerated expansion in all models irrespective of the presence of the coupling $Q$ between dark energy and dark matter. These fixed points are always classically stable for a phantom field, implying that the universe is eventually dominated by the energy density of a scalar field if phantom is responsible for dark energy. When the equation of state w_\vp for the field \vp is larger than -1, we find that scaling solutions are stable if the scalar-field dominant solution is unstable, and vice versa. Therefore in this case the final attractor is either a scaling solution with constant \Omega_\vp satisfying 0<\Omega_\vp<1 or a scalar-field dominant solution with \Omega_\vp=1.Comment: 21 pages, 5 figures; minor clarifications added, typos corrected and references updated; final version to appear in JCA

MSSM Higgs Boson Phenomenology at the Tevatron Collider

The Higgs sector of the minimal supersymmetric standard model (MSSM) consists of five physical Higgs bosons, which offer a variety of channels for their experimental search. The present study aims to further our understanding of the Tevatron reach for MSSM Higgs bosons, addressing relevant theoretical issues related to the SUSY parameter space, with special emphasis on the radiative corrections to the down--quark and lepton couplings to the Higgs bosons for large $\tan\beta$. We performed a computation of the signal and backgrounds for the production processes $W\phi$ and $b \bar{b} \phi$ at the upgraded Tevatron, with $\phi$ being the neutral MSSM Higgs bosons. Detailed experimental information and further higher order calculations are demanded to confirm/refine these predictions.Comment: 47 pages, REVTex format, 15 figures; spacing changed to reduce length, references added or moved within manuscript for clarity, some rewording, labelling corrected on two figures, results unchange

Multiplicity dependence of jet-like two-particle correlations in p-Pb collisions at sNN\sqrt{s_{NN}} = 5.02 TeV

Two-particle angular correlations between unidentified charged trigger and associated particles are measured by the ALICE detector in p-Pb collisions at a nucleon-nucleon centre-of-mass energy of 5.02 TeV. The transverse-momentum range 0.7 $< p_{\rm{T}, assoc} < p_{\rm{T}, trig} <$ 5.0 GeV/$c$ is examined, to include correlations induced by jets originating from low momen\-tum-transfer scatterings (minijets). The correlations expressed as associated yield per trigger particle are obtained in the pseudorapidity range $|\eta|<0.9$. The near-side long-range pseudorapidity correlations observed in high-multiplicity p-Pb collisions are subtracted from both near-side short-range and away-side correlations in order to remove the non-jet-like components. The yields in the jet-like peaks are found to be invariant with event multiplicity with the exception of events with low multiplicity. This invariance is consistent with the particles being produced via the incoherent fragmentation of multiple parton--parton scatterings, while the yield related to the previously observed ridge structures is not jet-related. The number of uncorrelated sources of particle production is found to increase linearly with multiplicity, suggesting no saturation of the number of multi-parton interactions even in the highest multiplicity p-Pb collisions. Further, the number scales in the intermediate multiplicity region with the number of binary nucleon-nucleon collisions estimated with a Glauber Monte-Carlo simulation.Comment: 23 pages, 6 captioned figures, 1 table, authors from page 17, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/161

Radiative corrections to e+e−→H+H−e^+ e^- \to H^+ H^-: THDM versus MSSM

One loop radiative corrections to $e^+e^-\to H^+ H^-$ are considered at future linear collider energies, in the general type II Two Higgs Doublet Model (THDM) and in the Minimal Supersymmetric Standard Model-like (MSSM) Higgs sector. To make the comparison between THDM and MSSM tractable, we have introduced a quasi-SUSY parameterization which preserves all the tree-level Higgs mass-sum-rules of the MSSM, and involves just 3 free parameters in the Higgs sector (instead of 7 in the general THDM) and comprises the MSSM as a particular case. The model-independent soft photon contribution is isolated and shown to be substantial. Important effects come also from the contribution of the model dependent $h^0 H^+ H^-$ and $H^0 H^+ H^-$ vertices to the final state. In the MSSM, the contribution of the Higgs sector is moderate (a few percent) while in the THDM and both for small and large $\tan \beta$ important effects ($\sim +30$) can be found.Comment: 46 pages, LaTeX, 9 figures, shortened and revised version, to be published in Nuclear Physics

Measurement of the top quark-pair production cross section with ATLAS in pp collisions at \sqrt{s}=7\TeV

A measurement of the production cross-section for top quark pairs(\ttbar) in $pp$ collisions at \sqrt{s}=7 \TeV is presented using data recorded with the ATLAS detector at the Large Hadron Collider. Events are selected in two different topologies: single lepton (electron $e$ or muon $\mu$) with large missing transverse energy and at least four jets, and dilepton ($ee$, $\mu\mu$ or $e\mu$) with large missing transverse energy and at least two jets. In a data sample of 2.9 pb-1, 37 candidate events are observed in the single-lepton topology and 9 events in the dilepton topology. The corresponding expected backgrounds from non-\ttbar Standard Model processes are estimated using data-driven methods and determined to be $12.2 \pm 3.9$ events and $2.5 \pm 0.6$ events, respectively. The kinematic properties of the selected events are consistent with SM \ttbar production. The inclusive top quark pair production cross-section is measured to be \sigmattbar=145 \pm 31 ^{+42}_{-27} pb where the first uncertainty is statistical and the second systematic. The measurement agrees with perturbative QCD calculations.Comment: 30 pages plus author list (50 pages total), 9 figures, 11 tables, CERN-PH number and final journal adde

Inclusive search for same-sign dilepton signatures in pp collisions at root s=7 TeV with the ATLAS detector

An inclusive search is presented for new physics in events with two isolated leptons (e or mu) having the same electric charge. The data are selected from events collected from p p collisions at root s = 7 TeV by the ATLAS detector and correspond to an integrated luminosity of 34 pb(-1). The spectra in dilepton invariant mass, missing transverse momentum and jet multiplicity are presented and compared to Standard Model predictions. In this event sample, no evidence is found for contributions beyond those of the Standard Model. Limits are set on the cross-section in a fiducial region for new sources of same-sign high-mass dilepton events in the ee, e mu and mu mu channels. Four models predicting same-sign dilepton signals are constrained: two descriptions of Majorana neutrinos, a cascade topology similar to supersymmetry or universal extra dimensions, and fourth generation d-type quarks. Assuming a new physics scale of 1 TeV, Majorana neutrinos produced by an effective operator V with masses below 460 GeV are excluded at 95% confidence level. A lower limit of 290 GeV is set at 95% confidence level on the mass of fourth generation d-type quarks

Standalone vertex finding in the ATLAS muon spectrometer

A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011