Design and application of electromechanical actuators for deep space missions

During the period 8/16/92 through 2/15/93, work has been focused on three major topics: (1) screw modeling and testing; (2) motor selection; and (3) health monitoring and fault diagnosis. Detailed theoretical analysis has been performed to specify a full dynamic model for the roller screw. A test stand has been designed for model parameter estimation and screw testing. In addition, the test stand is expected to be used to perform a study on transverse screw loading

Stage of HIV presentation at initial clinic visit following a community-based HIV testing campaign in rural Kenya

Background: The Kenyan Ministry of Health and partners implemented a community-based integrated prevention campaign (IPC) in Western Kenya in 2008. The aim of this study was to determine whether the IPC, compared to Voluntary Counselling and Testing (VCT) services, was able to identify HIV positive individuals earlier in the clinical course of HIV infection following testing

Design and application of electromechanical actuators for deep space missions

This progress report documents research and development efforts performed from August 16, 1993 through February 15, 1994 on NASA Grant NAG8-240, 'Design and Application of Electromechanical Actuators for Deep Space Missions.' Following the executive summary are four report sections: Motor Selection, Tests Stand Development, Health Monitoring and Fault Management, and Experiment Planning. Three specific motor types have been considered as prime movers for TVC EMA applications: the brushless dc motor, the permanent magnet synchronous motor, and the induction motor. The fundamental finding was that, in general, the primary performance issues were energy efficiency and thermal dissipation (rotor heating). In terms of all other issues, the three motor types were found to compare quite equally. Among the design changes made to the test stand since the last progress report is the addition of more mounting holes in the side beams. These additional holes allow the movable end beam to be attached in a greater number of positions than previously. With this change the movable end beam can move from full forward to full back in three inch increments. Specific mathematical details on the approach that have been employed for health monitoring and fault management (HMFM) have been reported previously. This approach is based on and adaptive Kalman filter strategy. In general, a bank of filters can be implemented for each primary fault type. Presently under consideration for the brushless dc machine are the following faults: armature winding open-circuits, armature winding short-circuits (phase-to-phase and phase-to-ground), bearing degradation, and rotor flux weakening. The mechanically oriented experiments include transient loading experiments, transverse loading experiment, friction experiment, motor performance experiment, and HMFM experiment

Design and application of electromechanical actuators for deep space missions

The annual report Design and Application of Electromechanical Actuators for Deep Space Missions is presented. The reporting period is 16 Aug. 1992 to 15 Aug. 1993. However, the primary focus will be work performed since submission of our semi-annual progress report in Feb. 1993. Substantial progress was made. We currently feel confident in providing guidelines for motor and control strategy selection in electromechanical actuators to be used in thrust vector control (TVC) applications. A small portion was presented in the semi-annual report. At this point, we have implemented highly detailed simulations of various motor/drive systems. The primary motor candidates were the brushless dc machine, permanent magnet synchronous machine, and the induction machine. The primary control implementations were pulse width modulation and hysteresis current control. Each of the two control strategies were applied to each of the three motor choices. With either pulse width modulation or hysteresis current control, the induction machine was always vector controlled. A standard test position command sequence for system performance evaluation is defined. Currently, we are gathering all of the necessary data for formal presentation of the results. Briefly stated for TVC application, we feel that the brushless dc machine operating under PWM current control is the best option. Substantial details on the topic, with supporting simulation results, will be provided later, in the form of a technical paper prepared for submission and also in the next progress report with more detail than allowed for paper publication

Design and application of electromechanical actuators for deep space missions

This third semi-annual progress report covers the reporting period from August 16, 1994 through February 15, 1995 on NASA Grant NAG8-240, 'Design and Application of Electromechanical Actuators for Deep Space Missions'. There are two major report sections: Motor Control Status/Electrical Experiment Planning and Experiment Planning and Initial Results. The primary emphasis of our efforts during the reporting period has been final construction and testing of the laboratory facilities. As a result, this report is dedicated to that topic

Design and application of electromechanical actuators for deep space missions

This progress report documents research and development efforts performed from August 16, 1993 through August 15, 1994 on NASA Grant NAG8-240, 'Design and Application of Electromechanical Actuators for Deep Space Missions.' Since the submission of our last progress report in February 1994, our efforts have been almost entirely focused on final construction of the test stand and experiment design. Hence, this report is dedicated solely to these topics. However, updates on our research personnel and our health monitoring and fault management efforts are provided in this summary. Following this executive summary are two report sections. The first is devoted to the motor drive being constructed for the test stand. The thrust of the next section is the mechanical and hydraulic design and construction based on the planned experimental requirements. Following both major sections are three appendices

A Mini-Review of Shape-Memory Polymer-Based Materials:Stimuli-responsive shape-memory polymers

Shape-memory polymers (SMPs) enable the production of stimuli-responsive polymer-based materials with the ability to undergo a large recoverable deformation upon the application of an external stimulus. Academic and industrial research interest in the shape-memory effects (SMEs) of these SMP-based materials is growing for task-specific applications. This mini-review covers interesting aspects of SMP-based materials, their properties, how they may be investigated and highlights examples of the potential applications of these materials

Atomistic Simulation of Water Incorporation and Mobility in Bombyx mori Silk Fibroin

Bombyx mori silk fibroin (SF) is a biopolymer that can be processed into materials with attractive properties (e.g., biocompatibility and degradability) for use in a multitude of technical and medical applications (including textiles, sutures, drug delivery devices, tissue scaffolds, etc.). Utilizing the information from experimental and computational SF studies, a simplified SF model has been produced (alanine–glycine [Ala–Gly]n crystal structure), enabling the application of both molecular dynamic and density functional theory techniques to offer a unique insight into SF-based materials. The secondary structure of the computational model has been evaluated using Ramachandran plots under different environments (e.g., different temperatures and ensembles). In addition, the mean square displacement of water incorporated into the SF model was investigated: the diffusion coefficients, activation energies, most and least favorable positions of water, and trajectory of water diffusion through the SF model are obtained. With further computational study and in combination with experimental data, the behavior/degradation of SF (and similar biomaterials) can be elucidated. Consequently, greater control of the aforementioned technologies may be achieved and positively affect their potential applications

Mg/Zn metal-air primary batteries using silk fibroin-ionic liquid polymer electrolytes

Batteries are utilized in a multitude of devices encountered in our daily lives. Here we describe a comparative study of Magnesium-air and Zinc-air primary batteries using silk fibroin-ionic liquid polymer electrolytes (composed of Bombyx mori silk fibroin and choline nitrate). The ionic conductivity of the films was of the order of mS cm−1 which is sufficient to satisfy the conductivity requirements for many battery applications, the open circuit voltages (V) for the Mg 1:1 SF:IL and 1:3 SF:IL batteries just after fabrication were ca. 1.8 and 1.7 V, respectively; the 1:1 SF:IL battery had a capacity of 0.84 mAh cm−2, whereas the 1:3 SF:IL battery had a capacity of 0.68 mAh cm−2. The open circuit voltages (V) for the Zn 1:1 SF:IL and 1:3 SF:IL batteries were in the range of 1.3 and 1.2 V just after fabrication; the 1:3 SF:IL battery displayed a capacity of 0.96 mAh cm−2 and the 1:3 SF:IL battery displayed a capacity of 0.72 mAh cm−2. Integration of the PE and substitution of the carbon cloth electrodes with degradable materials would offer routes to production of transient primary batteries helping to address the global issue of electronic waste (e-waste)

Rapid Implementation of an Integrated Large-Scale HIV Counseling and Testing, Malaria, and Diarrhea Prevention Campaign in Rural Kenya

BACKGROUND: Integrated disease prevention in low resource settings can increase coverage, equity and efficiency in controlling high burden infectious diseases. A public-private partnership with the Ministry of Health, CDC, Vestergaard Frandsen and CHF International implemented a one-week integrated multi-disease prevention campaign. METHOD: Residents of Lurambi, Western Kenya were eligible for participation. The aim was to offer services to at least 80% of those aged 15-49. 31 temporary sites in strategically dispersed locations offered: HIV counseling and testing, 60 male condoms, an insecticide-treated bednet, a household water filter for women or an individual filter for men, and for those testing positive, a 3-month supply of cotrimoxazole and referral for follow-up care and treatment. FINDINGS: Over 7 days, 47,311 people attended the campaign with a 96% uptake of the multi-disease preventive package. Of these, 99.7% were tested for HIV (87% in the target 15-49 age group); 80% had previously never tested. 4% of those tested were positive, 61% were women (5% of women and 3% of men), 6% had median CD4 counts of 541 cell/µL (IQR; 356, 754). 386 certified counselors attended to an average 17 participants per day, consistent with recommended national figures for mass campaigns. Among women, HIV infection varied by age, and was more likely with an ended marriage (e.g. widowed vs. never married, OR.3.91; 95% CI. 2.87-5.34), and lack of occupation. In men, quantitatively stronger relationships were found (e.g. widowed vs. never married, OR.7.0; 95% CI. 3.5-13.9). Always using condoms with a non-steady partner was more common among HIV-infected women participants who knew their status compared to those who did not (OR.5.4 95% CI. 2.3-12.8). CONCLUSION: Through integrated campaigns it is feasible to efficiently cover large proportions of eligible adults in rural underserved communities with multiple disease preventive services simultaneously achieving various national and international health development goals