Airborne Measurements of Gravity Wave Breaking at the Tropopause

2000 FLORIDA AVE NW, WASHINGTON, DC, 2000

Transition to Turbulence in Shear above the Tropopause

2000 FLORIDA AVE NW, WASHINGTON, USA, DC, 2000

Unprecedented levels of ultrafine particles, major sources, and the hydrological cycle

Ultrafine particles (UFP) acting as cloud condensation nuclei (CCN) are the driving force behind changing rainfall patterns. Recently observed weather extremes like floods and drought might be due to changing anthropogenic UFP emissions. However, the sources and budgets of anthropogenic primary and secondary particles are not well known. Based on airborne measurements we identified as a major contribution modern fossil fuel flue gas cleaning techniques to cause a doubling of global primary UFP number emissions. The subsequent enhancement of CCN numbers has several side effects. It’s changing the size of the cloud droplets and delays raindrop formation, suppressing certain types of rainfall and increasing the residence time of water vapour in the atmosphere. This additional latent energy reservoir is directly available for invigoration of rainfall extremes. Additionally it’s a further contribution to the column density of water vapour as a greenhouse gas and important for the infrared radiation budget. The localized but ubiquitous fossil fuel related UFP emissions and their role in the hydrological cycle, may thus contribute to regional or continental climate trends, such as increasing drought and flooding, observed within recent decades

Ultrafine particles in the lower troposphere: major sources, invisible plumes and meteorological transport processes

Ultrafine particles in the atmosphere are key factors for aerosol cloud interaction as they affect cloud droplet size distributions, latent heat transport into elevated layers via droplet evaporation and precipitation properties via delayed raindrop generation and possibly invigoration of torrential rains. They are spatially and temporarily highly uneven distributed, suggesting the presence of strong sources either for primary particle emissions or for particle precursor materials. Airborne investigations now allowed to identify major anthropogenic primary particle sources, their strength and contribution to the ultrafine particle budget. Current industrial flue gas cleaning technologies favor the production of nucleation mode aerosol by gas to particle conversion which is emitted into mid elevations of the planetary boundary layer, transported over hundreds of km and vertically mixed by thermal convection on different time scales. These sources also emit a suitable mixture of sulphur and nitrogen compounds and ammonia, key components for aerosol nucleation from gas to particle conversion. Meteorological transport and the results of three dimensional in situ measurements explain both the spatial and temporal patterns of number and size distributions of ultrafine nucleation mode particles observed. Budget studies allow a comparison with recent emission szenarios. Results from clean and polluted environments and the potential impact of these ultrafine particles on the hydrological cycle will be discussed

Evaluation of a new airborne microwave remote sensing radiometer by measuring the salinity gradients across the shelf of the Great Barrier Reef lagoon

Over the last ten years, some operational airborne remote sensing systems have become available for mapping surface salinity over large areas in near real time. A new dual-polarized Polarimetric L-band Multibeam Radiometer (PLMR) has been developed to improve accuracy and precision when compared with previous instrument generations. This paper reports on the first field evaluation of the performance of the PLMR by measuring salinity gradients in the central Great Barrier Reef. Before calibration, the raw salinity values of the PLMR and conductivity-temperature-depth (CTD) differed by 3-6 psu. The calibration, which uses in situ salinity data to remove long-term drifts in the PLMR as well as environmental effects such as surface roughness and radiation from the sky and atmosphere, was carried out by equating the means of the PLMR and CTD salinity data over a subsection of the transect, after which 85% of the salinity values between the PLMR and CTD are within 0.1 psu along the complete transect. From offshore to inshore across the shelf, the PLMR shows an average cross-shelf salinity increase of about 0.4 psu and a decrease of 2 psu over the inshore 20 km at -19deg S (around Townsville) and -18deg S (around Lucinda), respectively. The average cross-shelf salinity increase was 0.3 psu for the offshore 100 km over all transects. These results are consistent with the in situ CTD results. This survey shows that PLMR provided an effective method of rapidly measuring the surface salinity in near real time when a calibration could be made

Effective LAI and CHP of a single tree from small-footprint full-waveform LiDAR

This letter has tested the canopy height profile (CHP) methodology as a way of effective leaf area index (LAIe) and vertical vegetation profile retrieval at a single-tree level. Waveform and discrete airborne LiDAR data from six swaths, as well as from the combined data of six swaths, were used to extract the LAIe of a single live Callitris glaucophylla tree. LAIe was extracted from raw waveform as an intermediate step in the CHP methodology, with two different vegetation-ground reflectance ratios. Discrete point LAIe estimates were derived from the gap probability using the following: 1) single ground returns and 2) all ground returns. LiDAR LAIe retrievals were subsequently compared to hemispherical photography estimates, yielding mean values within ±7% of the latter, depending on the method used. The CHP of a single dead Callitris glaucophylla tree, representing the distribution of vegetation material, was verified with a field profile manually reconstructed from convergent photographs taken with a fixed-focal-length camera. A binwise comparison of the two profiles showed very high correlation between the data reaching R2 of 0.86 for the CHP from combined swaths. Using a study-area-adjusted reflectance ratio improved the correlation between the profiles, but only marginally in comparison to using an arbitrary ratio of 0.5 for the laser wavelength of 1550 nm

Anatomy of Cirrus Clouds: Results from the Emerald Airborne Campaigns

2000 FLORIDA AVE NW, WASHINGTON, USA, DC, 2000

CHP toolkit: case study of LAIe sensitivity to discontinuity of canopy cover in fruit plantations

This paper presents an open-source canopy height profile (CHP) toolkit designed for processing small-footprint full-waveform LiDAR data to obtain the estimates of effective leaf area index (LAIe) and CHPs. The use of the toolkit is presented with a case study of LAIe estimation in discontinuous-canopy fruit plantations. The experiments are carried out in two study areas, namely, orange and almond plantations, with different percentages of canopy cover (48% and 40%, respectively). For comparison, two commonly used discrete-point LAIe estimation methods are also tested. The LiDAR LAIe values are first computed for each of the sites and each method as a whole, providing “apparent” site-level LAIe, which disregards the discontinuity of the plantations’ canopies. Since the toolkit allows for the calculation of the study area LAIe at different spatial scales, between-tree-level clumpingcan be easily accounted for and is then used to illustrate the impact of the discontinuity of canopy cover on LAIe retrieval. The LiDAR LAIe estimates are therefore computed at smaller scales as a mean of LAIe in various grid-cell sizes, providing estimates of “actual” site-level LAIe. Subsequently, the LiDAR LAIe results are compared with theoretical models of “apparent” LAIe versus “actual” LAIe, based on known percent canopy cover in each site. The comparison of those models to LiDAR LAIe derived from the smallest grid-cell sizes against the estimates of LAIe for the whole site has shown that the LAIe estimates obtained from the CHP toolkit provided values that are closest to those of theoretical models

Discovery of Holocene ooid shoals in a siliciclastic delta, De Grey River, North West Shelf, Australia

Onshore and offshore site investigations along the dryland tide-dominated De Grey River delta (northwestern Australia) led to the unexpected discovery of the largest yet-known marine ooid shoals in the Indo-Pacific region. Ooids exhibit up to 60 tangential aragonitic laminae that were formed around fluvial sediment grains during the late Holocene. Covering an area >1250 km2, their spatial extent rivals in size individual ooid shoals from the Bahamas. Shoals appear to be spatially linked with the De Grey River, suggesting that fluvial outputs, combined with a macrotidal range, facilitated the precipitation of the ooids. Following their formation, ooids were reworked through tidal and wave processes along the delta. As a result, the delta sedimentary features, including beach ridges, mouth bars, and distributary channels, are composed of ooids. This discovery broadens the range of depositional and climatic environments in which ooids can form and demonstrates that fluvial runoff may not inhibit aragonite precipitation. Such a configuration also provides a unique analogue for ancient ooids found in association with siliciclastic grains and further indicates that the interpretation of typical siliciclastic geomorphologies from geophysical data does not preclude the presence of carbonate grains.Discovery of Holocene ooid shoals in a siliciclastic delta, De Grey River, North West Shelf, AustraliapublishedVersio

Aboriginal artefacts on the continental shelf reveal ancient drowned cultural landscapes in northwest Australia

This article reports Australia’s first confirmed ancient underwater archaeological sites from the continental shelf, located off the Murujuga coastline in north-western Australia. Details on two underwater sites are reported: Cape Bruguieres, comprising > 260 recorded lithic artefacts at depths down to −2.4 m below sea level, and Flying Foam Passage where the find spot is associated with a submerged freshwater spring at −14 m. The sites were discovered through a purposeful research strategy designed to identify underwater targets, using an iterative process incorporating a variety of aerial and underwater remote sensing techniques and diver investigation within a predictive framework to map the submerged landscape within a depth range of 0–20 m. The condition and context of the lithic artefacts are analysed in order to unravel their depositional and taphonomic history and to corroborate their in situ position on a pre-inundation land surface, taking account of known geomorphological and climatic processes including cyclone activity that could have caused displacement and transportation from adjacent coasts. Geomorphological data and radiometric dates establish the chronological limits of the sites and demonstrate that they cannot be later than 7000 cal BP and 8500 cal BP respectively, based on the dates when they were finally submerged by sea-level rise. Comparison of underwater and onshore lithic assemblages shows differences that are consistent with this chronological interpretation. This article sets a foundation for the research strategies and technologies needed to identify archaeological targets at greater depth on the Australian continental shelf and elsewhere, building on the results presented. Emphasis is also placed on the need for legislation to better protect and manage underwater cultural heritage on the 2 million square kilometres of drowned landscapes that were once available for occupation in Australia, and where a major part of its human history must lie waiting to be discovered