Calorimetric detection of neutral-atom content of ion beam

Energy deposition technique deduces neutral-beam flux or dose from measured values of incremental resistance increases in platinum wire passed through beam. Steady-state heat balance analysis led to equivalent neutral-beam current. Method was used to detect neutral-atom content of 60-keV argon ion beam

Graduate engineering research participation in aeronautics

Graduate student engineering research in aeronautics at Old Dominion University is surveyed. Student participation was facilitated through a NASA sponsored university program which enabled the students to complete degrees. Research summaries are provided and plans for the termination of the grant program are outlined. Project topics include: Failure modes for mechanically fastened joints in composite materials; The dynamic stability of an earth orbiting satellite deploying hinged appendages; The analysis of the Losipescu shear test for composite materials; and the effect of boundary layer structure on wing tip vortex formation and decay

A SIMPLIFIED METHOD OF DETERMINING THE ELASTIC STATE OF THERMAL STRESS IN A THIN, FLAT PLATE OF FINITE DIMENSIONS

Elastic state determination of thermal stress in thin, flat plate of finite dimension

New devices for flow measurements: Hot film and burial wire sensors, infrared imagery, liquid crystal, and piezo-electric model

An experimental program aimed at identifying areas in low speed aerodynamic research where infrared imaging systems can make significant contributions is discussed. Implementing a new technique, a long electrically heated wire was placed across a laminar flow. By measuring the temperature distribution along the wire with the IR imaging camera, the flow behavior was identified

Digital enhancement of computerized axial tomograms

A systematic evaluation was conducted of certain digital image enhancement techniques performed in image space. Three types of images were used, computer generated phantoms, tomograms of a synthetic phantom, and axial tomograms of human anatomy containing images of lesions, artificially introduced into the tomograms. Several types of smoothing, sharpening, and histogram modification were explored. It was concluded that the most useful enhancement techniques are a selective smoothing of singular picture elements, combined with contrast manipulation. The most useful tool in applying these techniques is the gray-scale histogram

Transient hot-film sensor response in a shock tube

Shock tube experiments were performed to determine the response of a hot-film sensor, mounted flush on the side wall of a shock tube, to unsteady flow behind a normal shock wave. The present experiments attempt to isolate the response of the anemometer due only to the change in convective heat transfer at the hot-film surface. The experiments, performed at low supersonic shock speeds in air, are described along with the data acquisition procedure. The change in convective heat transfer is deduced from the data and the results are compared with those from transient boundary layer theory and another set of experimental results. Finally, a transient local heat transfer coefficient is formulated for use as the forcing function in a hot-film sensor instrument model simulation

Density-Dependent Response of an Ultracold Plasma to Few-Cycle Radio-Frequency Pulses

Ultracold neutral plasmas exhibit a density-dependent resonant response to applied radio-frequency (RF) fields in the frequency range of several MHz to hundreds of MHz for achievable densities. We have conducted measurements where short bursts of RF were applied to these plasmas, with pulse durations as short as two cycles. We still observed a density-dependent resonant response to these short pulses. However, the too rapid timescale of the response, the dependence of the response on the sign of the driving field, the response as the number of pulses was increased, and the difference in plasma response to radial and axially applied RF fields are inconsistent with the plasma response being due to local resonant heating of electrons in the plasma. Instead, our results are consistent with rapid energy transfer from collective motion of the entire electron cloud to electrons in high-energy orbits. In addition to providing a potentially more robust way to measure ultracold neutral plasma densities, these measurements demonstrate the importance of collective motion in the energy transport in these systems.Comment: 5 pages, 4 figure

Low-speed flowfield characterization by infrared measurements of surface temperatures

An experimental program was aimed at identifying areas in low speed aerodynamic research where infrared imaging systems can make significant contributions. Implementing a new technique, a long electrically heated wire was placed across a laminar jet. By measuring the temperature distribution along the wire with the IR imaging camera, the flow behavior was identified. Furthermore, using Nusselt number correlations, the velocity distribution could be deduced. The same approach was used to survey wakes behind cylinders in a wind-tunnel. This method is suited to investigate flows with position dependent velocities, e.g., boundary layers, confined flows, jets, wakes, and shear layers. It was found that the IR imaging camera cannot accurately track high gradient temperature fields. A correlation procedure was devised to account for this limitation. Other wind-tunnel experiments included tracking the development of the laminar boundary layer over a warmed flat plate by measuring the chordwise temperature distribution. This technique was applied also to the flow downstream from a rearward facing step. Finally, the IR imaging system was used to study boundary layer behavior over an airfoil at angles of attack from zero up to separation. The results were confirmed with tufts observable both visually and with the IR imaging camera