Autonomous Control Strategy of DC Microgrid for Islanding mode using Power Line Communication

This paper proposes a DC-bus signaling (DBS) method for autonomous power management in a DC microgrid, used to improve its reliability. Centralized power management systems require communication between the power sources and loads. However, the DBS method operates based on the common DC-bus voltage and does not require communication. Based on the DC-bus voltage band, the DC-bus voltage can be used to inform the status of the DC-bus in various scenarios. The DC microgrid operates independently to maintain the system stably in the DC-bus voltage band. The DC microgrid can be divided into a grid-connected mode and an islanding mode. This paper proposes a control strategy based on power management of various independent components in islanding mode. In addition, the autonomous control method for switching the converter???s operation between grid-connected mode and islanding mode is proposed. A DC microgrid test bed consisting of a grid-connected AC/DC converter, a bidirectional DC/DC converter, a renewable energy simulator, DC home appliances and a DC-bus protector is used to test the proposed control strategy. The proposed autonomous control strategy is experimentally verified using the DC microgrid test bed

Construction and analysis of causally dynamic hybrid bond graphs

Engineering systems are frequently abstracted to models with discontinuous behaviour (such as a switch or contact), and a hybrid model is one which contains continuous and discontinuous behaviours. Bond graphs are an established physical modelling method, but there are several methods for constructing switched or ‘hybrid’ bond graphs, developed for either qualitative ‘structural’ analysis or efficient numerical simulation of engineering systems. This article proposes a general hybrid bond graph suitable for both. The controlled junction is adopted as an intuitive way of modelling a discontinuity in the model structure. This element gives rise to ‘dynamic causality’ that is facilitated by a new bond graph notation. From this model, the junction structure and state equations are derived and compared to those obtained by existing methods. The proposed model includes all possible modes of operation and can be represented by a single set of equations. The controlled junctions manifest as Boolean variables in the matrices of coefficients. The method is more compact and intuitive than existing methods and dispenses with the need to derive various modes of operation from a given reference representation. Hence, a method has been developed, which can reach common usage and form a platform for further study

Using of cold forming for getting product with the necessary properties of deformed metal

Показана можливість виготовлення порожнистого виробу заданої форми з необхідними властивостями здеформованого металу. На першому переході напівфабрикат отримують холодним комбінованим видавлюванням. На другому переході виконується витягуванням з потоншенням для зменшення товщини стінки та збільшення висоти виробу. Методом скінченних елементів встановлені параметри видавлювання, які забезпечують одночасну течію металу в двох напрямках та формоутворення виробу при знижених зусиллях, а також необхідні розміри послідовно розташованих матриць для витягування з потоншенням. Визначені силові режими видавлювання, розподіли питомих зусиль на деформуючому інструменті, зусилля виштовхування напівфабрикату з матриці та напруження і деформації у напівфабрикаті. Видавлювання дозволило отримати відповідне пропрацювання структури металу холодною пластичною деформацією в донній частині майбутнього виробу з досягненням необхідної межі текучості у здеформованому металі. Для витягування з потоншенням отриманого напівфабрикату, з урахуванням накопичених деформацій, виявлені залежність зусилля витягування від переміщення пуансону, кінцева форма та розміри виробу, а також інтенсивність деформацій та ступінь використання ресурсу пластичності у здеформованому металі стінки виробу.There are shown the possibility of obtaining products with a cavity given shape with the desired properties of the deformed metal. The half-stuff is obtained by cold combined extruding at the first transition, performed ironing for reducing of the wall thickness and increasing the height of the product at the second transition. There’re identified the parameters of extruding by the finite element method, which provide simultaneous flow of metal in two directions and shaping products at reduced forces, as well as the required size of successive dies for ironing. Also there’re identified the force modes of extruding, distribution of specific forces on the deforming tools, ejection’s forces of half-stuff from die, stress and strain in the metal of half-stuff. Extruding allowed to obtain the appropriate treatment of metal structure in the bottom part of the future product by cold plastic deformation with achieving the desired yield strength in deformed metal. Identified dependence on the forces of movement of the punch, the final shape and size of the product, as well as strain intensity and degree of using of resource of plasticity in the deformed metal in the wall products for ironing in view of the accumulated strain.Показана возможность получения изделия с полостью заданной формы с необходимыми свойствами сдеформированного металла. На первом переходе полуфабрикат получают холодным комбинированным выдавливанием, на втором переходе выполняется вытяжка с утонением для уменьшения толщины стенки и увеличения высоты изделия. Методом конечных элементов установлены параметры выдавливания, которые обеспечивают одновременное течение металла в двух направлениях и формообразование изделия при сниженных усилиях, а также необходимые размеры последовательно расположенных матриц для вытяжки с утонением. Определены силовые режимы выдавливания, распределения удельных усилий на деформирующем инструменте, усилия выталкивания полуфабриката с матрицы, напряжения и деформации в полуфабрикате. Выдавливание позволило получить соответствующую проработку структуры металла холодной пластической деформацией в донной части будущего изделия с достижением необходимого предела текучести в сдеформированном металле. Для вытяжки с утонением, с учетом накопленных деформаций, выявлены зависимость усилия от перемещения пуансона, конечные форма и размеры изделия, а также интенсивность деформаций и степень использования ресурса пластичности в сдеформированном металле стенки изделия

Mobile resistome of human gut and pathogen drives anthropogenic bloom of antibiotic resistance

BACKGROUND:The impact of human activities on the environmental resistome has been documented in many studies, but there remains the controversial question of whether the increased antibiotic resistance observed in anthropogenically impacted environments is just a result of contamination by resistant fecal microbes or is mediated by indigenous environmental organisms. Here, to determine exactly how anthropogenic influences shape the environmental resistome, we resolved the microbiome, resistome, and mobilome of the planktonic microbial communities along a single river, the Han, which spans a gradient of human activities. RESULTS:The bloom of antibiotic resistance genes (ARGs) was evident in the downstream regions and distinct successional dynamics of the river resistome occurred across the spatial continuum. We identified a number of widespread ARG sequences shared between the river, human gut, and pathogenic bacteria. These human-related ARGs were largely associated with mobile genetic elements rather than particular gut taxa and mainly responsible for anthropogenically driven bloom of the downstream river resistome. Furthermore, both sequence- and phenotype-based analyses revealed environmental relatives of clinically important proteobacteria as major carriers of these ARGs. CONCLUSIONS:Our results demonstrate a more nuanced view of the impact of anthropogenic activities on the river resistome: fecal contamination is present and allows the transmission of ARGs to the environmental resistome, but these mobile genes rather than resistant fecal bacteria proliferate in environmental relatives of their original hosts. Video abstract

L-Asparaginase delivered by Salmonella typhimurium suppresses solid tumors

Bacteria can be engineered to deliver anticancer proteins to tumors via a controlled expression system that maximizes the concentration of the therapeutic agent in the tumor. L-asparaginase (L-ASNase), which primarily converts asparagine to aspartate, is an anticancer protein used to treat acute lymphoblastic leukemia. In this study, Salmonellae were engineered to express L-ASNase selectively within tumor tissues using the inducible araBAD promoter system of Escherichia coli. Antitumor efficacy of the engineered bacteria was demonstrated in vivo in solid malignancies. This result demonstrates the merit of bacteria as cancer drug delivery vehicles to administer cancer-starving proteins such as L-ASNase to be effective selectively within the microenvironment of cancer tissue

Bottom mixed layer oxygen dynamics in the Celtic Sea

The seasonally stratified continental shelf seas are highly productive, economically important environments which are under considerable pressure from human activity. Global dissolved oxygen concentrations have shown rapid reductions in response to anthropogenic forcing since at least the middle of the twentieth century. Oxygen consumption is at the same time linked to the cycling of atmospheric carbon, with oxygen being a proxy for carbon remineralisation and the release of CO2. In the seasonally stratified seas the bottom mixed layer (BML) is partially isolated from the atmosphere and is thus controlled by interplay between oxygen consumption processes, vertical and horizontal advection. Oxygen consumption rates can be both spatially and temporally dynamic, but these dynamics are often missed with incubation based techniques. Here we adopt a Bayesian approach to determining total BML oxygen consumption rates from a high resolution oxygen time-series. This incorporates both our knowledge and our uncertainty of the various processes which control the oxygen inventory. Total BML rates integrate both processes in the water column and at the sediment interface. These observations span the stratified period of the Celtic Sea and across both sandy and muddy sediment types. We show how horizontal advection, tidal forcing and vertical mixing together control the bottom mixed layer oxygen concentrations at various times over the stratified period. Our muddy-sand site shows cyclic spring-neap mediated changes in oxygen consumption driven by the frequent resuspension or ventilation of the seabed. We see evidence for prolonged periods of increased vertical mixing which provide the ventilation necessary to support the high rates of consumption observed

Measuring Coverage in MNCH:A Validation Study Linking Population Survey Derived Coverage to Maternal, Newborn, and Child Health Care Records in Rural China

Accurate data on coverage of key maternal, newborn, and child health (MNCH) interventions are crucial for monitoring progress toward the Millennium Development Goals 4 and 5. Coverage estimates are primarily obtained from routine population surveys through self-reporting, the validity of which is not well understood. We aimed to examine the validity of the coverage of selected MNCH interventions in Gongcheng County, China.We conducted a validation study by comparing women's self-reported coverage of MNCH interventions relating to antenatal and postnatal care, mode of delivery, and child vaccinations in a community survey with their paper- and electronic-based health care records, treating the health care records as the reference standard. Of 936 women recruited, 914 (97.6%) completed the survey. Results show that self-reported coverage of these interventions had moderate to high sensitivity (0.57 [95% confidence interval (CI): 0.50-0.63] to 0.99 [95% CI: 0.98-1.00]) and low to high specificity (0 to 0.83 [95% CI: 0.80-0.86]). Despite varying overall validity, with the area under the receiver operating characteristic curve (AUC) ranging between 0.49 [95% CI: 0.39-0.57] and 0.90 [95% CI: 0.88-0.92], bias in the coverage estimates at the population level was small to moderate, with the test to actual positive (TAP) ratio ranging between 0.8 and 1.5 for 24 of the 28 indicators examined. Our ability to accurately estimate validity was affected by several caveats associated with the reference standard. Caution should be exercised when generalizing the results to other settings.The overall validity of self-reported coverage was moderate across selected MNCH indicators. However, at the population level, self-reported coverage appears to have small to moderate degree of bias. Accuracy of the coverage was particularly high for indicators with high recorded coverage or low recorded coverage but high specificity. The study provides insights into the accuracy of self-reports based on a population survey in low- and middle-income countries. Similar studies applying an improved reference standard are warranted in the future

Galactic and Extragalactic Samples of Supernova Remnants: How They Are Identified and What They Tell Us

Supernova remnants (SNRs) arise from the interaction between the ejecta of a supernova (SN) explosion and the surrounding circumstellar and interstellar medium. Some SNRs, mostly nearby SNRs, can be studied in great detail. However, to understand SNRs as a whole, large samples of SNRs must be assembled and studied. Here, we describe the radio, optical, and X-ray techniques which have been used to identify and characterize almost 300 Galactic SNRs and more than 1200 extragalactic SNRs. We then discuss which types of SNRs are being found and which are not. We examine the degree to which the luminosity functions, surface-brightness distributions and multi-wavelength comparisons of the samples can be interpreted to determine the class properties of SNRs and describe efforts to establish the type of SN explosion associated with a SNR. We conclude that in order to better understand the class properties of SNRs, it is more important to study (and obtain additional data on) the SNRs in galaxies with extant samples at multiple wavelength bands than it is to obtain samples of SNRs in other galaxiesComment: Final 2016 draft of a chapter in "Handbook of Supernovae" edited by Athem W. Alsabti and Paul Murdin. Final version available at https://doi.org/10.1007/978-3-319-20794-0_90-

Observation of Dirac plasmons in a topological insulator

Plasmons are the quantized collective oscillations of electrons in metals and doped semiconductors. The plasmons of ordinary, massive electrons are since a long time basic ingredients of research in plasmonics and in optical metamaterials. Plasmons of massless Dirac electrons were instead recently observed in a purely two-dimensional electron system (2DEG)like graphene, and their properties are promising for new tunable plasmonic metamaterials in the terahertz and the mid-infrared frequency range. Dirac quasi-particles are known to exist also in the two-dimensional electron gas which forms at the surface of topological insulators due to a strong spin-orbit interaction. Therefore,one may look for their collective excitations by using infrared spectroscopy. Here we first report evidence of plasmonic excitations in a topological insulator (Bi2Se3), that was engineered in thin micro-ribbon arrays of different width W and period 2W to select suitable values of the plasmon wavevector k. Their lineshape was found to be extremely robust vs. temperature between 6 and 300 K, as one may expect for the excitations of topological carriers. Moreover, by changing W and measuring in the terahertz range the plasmonic frequency vP vs. k we could show, without using any fitting parameter, that the dispersion curve is in quantitative agreement with that predicted for Dirac plasmons.Comment: 11 pages, 3 figures, published in Nature Nanotechnology (2013

Circumstellar disks and planets. Science cases for next-generation optical/infrared long-baseline interferometers

We present a review of the interplay between the evolution of circumstellar disks and the formation of planets, both from the perspective of theoretical models and dedicated observations. Based on this, we identify and discuss fundamental questions concerning the formation and evolution of circumstellar disks and planets which can be addressed in the near future with optical and infrared long-baseline interferometers. Furthermore, the importance of complementary observations with long-baseline (sub)millimeter interferometers and high-sensitivity infrared observatories is outlined.Comment: 83 pages; Accepted for publication in "Astronomy and Astrophysics Review"; The final publication is available at http://www.springerlink.co