Parallel optical readout of a cantilever array in dynamic mode

In this work we present parallel optical readout of a cantilever array which operates in dynamic mode using a standard optical beam deflection configuration containing only one laser-detector pair. We show accurate readout of the resonance frequency shift of an individual cantilever within an array by designing arrays where each cantilever has a different resonance frequency. The different resonance frequencies are created by giving each cantilever a different length and allow parallel readout of all cantilevers within the array. We show that even if the cantilevers are closely spaced each cantilever resonance frequency can be individually tracked without signs of cross-talk at current measurement precision (below 12 mHz). Interference of the laser light reflecting of each cantilever is observed when the amplitude of the cantilever is on the order of the wavelength of the laser light

Nanotesla torque magnetometry using a microcantilever

We present a novel ultrasensitive magnetometry technique using a micromachined magnetic antilever that is brought in resonance. The induced magnetic moment generates a torque on the cantilever, thereby effectively stiffening the cantilever spring constant and changing its resonance frequency. Experiments are in good correspondence with the presented analytical model for this frequency shift, predicting the detection of nanotesla magnetic fields.\u

Selective low concentration ammonia sensing in a microfluidic lab-on-a-chip

In the medical community, there is a considerable interest in a diagnostic breath analyzer for ammonia that is selectively enough to measure in exhaled air and small enough for the small volumes available in such an application. An indirect measurement system for low gaseous ammonia concentrations has been miniaturized and integrated on a chip in order to reach this goal. The detection limit of the system was calculated to be 1.1 parts per billion (ppb). The response time was determined to be 1.6 min with a gas How of 50 ml/min. The required gas volume for one measurement is therefore sufficiently small, although sampling assistance is required for breath analysis. The selectivity of the system is sufficient to measure ammonia concentrations in the low-ppb range. The system is even sufficiently selective to be used in environments that contain elevated carbon dioxide levels, like exhaled air. The lower ammonia concentration expected in diagnostic breath analysis applications, 50 ppb, was demonstrated to be detectable

Schatting van in situ fluxen van organische microverontreinigingen uit waterbodems

Dit rapport beschrijft de resultaten van een onderzoek naar naleveringsfluxen van organische microverontreinigingen, ten behoeve van het Deltares koploperproject “Biobeschikbaarheid en gedrag van stoffen”, deelproject A “Nalevering van stoffen uit waterbodems”. Hierin wordt het belang van nalevering voor de kwaliteit van het oppervlaktewater onderzocht. Dit project moet leiden tot inzicht in de situaties waarin nalevering van stoffen uit de waterbodem naar het oppervlaktewater een significante (secundaire) verontreinigingbron vormt. Dit met het oog op normoverschrijding in het oppervlaktewater (chemische doelstelling KRW), of het niet bereiken van een goede ecologische toestand (ecologische doelstelling KRW). In het voorliggende rapport worden de resultaten van kolom flux-experimenten besproken. Aan de orde komen: (a) opzet meetprogramma voor zover afwijkend van het meetplan, (b) informatie met betrekking tot kwaliteitscontrole, (c) specificatie van gebruikte analysevoorschriften (d) analyseresultaten met korte toelichtin

Toxiciteit van oliefracties in sediment voor Corophium volutor

Naar aanleiding van toxiciteitexperimenten zijn milieu risicogrenzen voor minerale olie afgeleid, waarbij onderscheid wordt gemaakt naar fracties op basis van kookpunt (lengte van de koolstofketens). In dit onderzoek is onderzocht in hoeverre de voorgestelde risicogrenzen overeenkomen met waargenomen toxiciteit in veldsedimenten. Het oliegehalte werd in deze sedimenten bepaald door middel van XAD-extracties, waarmee het snel desorberend gehalte werd bepaald. Toxiciteit werd bepaald met een 10-daagse test met de slijkgarnaal Corophium volutator

Опорно-анкерне кріплення гірничих виробок вугільних шахт України

В статье анализируется опыт применения анкерной крепи горных выработок в горно- геологических условиях угольных шахт Украины. Представлены результаты практического применения.In the article experience of applications of roof bolting of mine workings in geological conditions of Ukrainian coal mines is analyzed. Results of a practical intrusion are presented

Information Storage and Retrieval for Probe Storage using Optical Diffraction Patterns

A novel method for fast information retrieval from a probe storage device is considered. It is shown that information can be stored and retrieved using the optical diffraction patterns obtained by the illumination of a large array of cantilevers by a monochromatic light source. In thermo-mechanical probe storage, the information is stored as a sequence of indentations on the polymer medium. To retrieve the information, the array of probes is actuated by applying a bending force to the cantilevers. Probes positioned over indentations experience deflection by the depth of the indentation, probes over the flat media remain un-deflected. Thus the array of actuated probes can be viewed as an irregular optical grating, which creates a data-dependent diffraction pattern when illuminated by laser light. We develop a low complexity modulation scheme, which allows the extraction of information stored in the pattern of indentations on the media from Fourier coefficients of the intensity of the diffraction pattern. We then derive a low-complexity maximum likelihood sequence detection algorithm for retrieving the user information from the Fourier coefficients. The derivation of both the modulation and the detection schemes is based on the Fraunhofer formula for data-dependent diffraction patterns. We show that for as long as the Fresnel number F<0.1, the optimal channel detector derived from Fraunhofer diffraction theory does not suffer any significant performance degradation.Comment: 14 pages, 11 figures. Version 2: minor misprints corrected, experimental section expande

Joule heating effects in nanoscale carbon-based memory devices

This is the author accepted manuscript. The final version is available from IEEE via the DOI in this record.One of the emerging candidates to bridge the gap between fast but volatile DRAM and non-volatile but slow storage devices is tetrahedral amorphous carbon (ta-C) based memory [1]-[3]. This offers a very good scalability, data retention and sub-5ns switching [2], [3]. Amorphous carbon memory devices can be electrically and optically switched from a high resistance state (HRS) to a low resistance state (LRS) [4]. The electrical conduction in the LRS is thought to be through sp2 clusters that form a conductive filament [4].This work was funded by the EU research & innovation project CareRAMM, no. 30998