59 research outputs found

    Experimental Research Using of MQL in Metal Cutting

    Get PDF
    In this paper an effect of using of minimal quantity lubrication (MQL) technique in turning operations is presented. Experimental research was performed on carbon steel C45E. Technological parameters: depth of cut, feed rate and cutting speed were adjusted to semi-machining and roughing. Higher values ​​of feed and cutting speed were used, than recommended from literature and different types of cooling and lubrication in turning conditions were applied. As a conventional procedure and technology, lubrication with flooding was applied. As special lubrication the MQL technique was used. During research, monitoring of the cutting force, chip shape, tool wear and surface roughness was performed. Relations between parameters, material machinability and economy of process were analyzed

    Radio flares from gamma-ray bursts

    Get PDF
    We present predictions of centimeter and millimeter radio emission from reverse shocks in the early afterglows of gamma-ray bursts with the goal of determining their detectability with current and future radio facilities. Using a range of GRB properties, such as peak optical brightness and time, isotropic equivalent gamma-ray energy and redshift, we simulate radio light curves in a framework generalized for any circumburst medium structure and including a parametrization of the shell thickness regime that is more realistic than the simple assumption of thick- or thin-shell approximations. Building on earlier work by Mundell et al. (2007) and Melandri et al. (2010) in which the typical frequency of the reverse shock was suggested to lie at radio, rather than optical wavelengths at early times, we show that the brightest and most distinct reverse-shock radio signatures are detectable up to 0.1 -- 1 day after the burst, emphasizing the need for rapid radio follow-up. Detection is easier for bursts with later optical peaks, high isotropic energies, lower circumburst medium densities, and at observing frequencies that are less prone to synchrotron self-absorption effects - typically above a few GHz. Given recent detections of polarized prompt gamma-ray and optical reverse-shock emission, we suggest that detection of polarized radio/mm emission will unambiguously confirm the presence of low-frequency reverse shocks at early time

    PHENOMENOLOGY OF REVERSE-SHOCK EMISSION IN THE OPTICAL AFTERGLOWS OF GAMMA-RAY BURSTS

    Get PDF
    We use a parent sample of 118 gamma-ray burst (GRB) afterglows, with known redshift and host galaxy extinction, to separate afterglows with and without signatures of dominant reverse-shock emission and to determine which physical conditions lead to a prominent reverse-shock emission. We identify 10 GRBs with reverse shock signatures - GRBs 990123, 021004, 021211, 060908, 061126, 080319B, 081007, 090102, 090424 and 130427A. By modeling their optical afterglows with reverse and forward shock analytic light curves and using Monte Carlo simulations, we estimate the parameter space of the physical quantities describing the ejecta and circumburst medium. We find that physical properties cover a wide parameter space and do not seem to cluster around any preferential values. Comparing the rest-frame optical, X-ray and high-energy properties of the larger sample of non-RS-dominated GRBs, we show that the early-time (< 1ks) optical spectral luminosity, X-ray afterglow luminosity and -ray energy output of our reverse-shock dominated sample do not differ significantly from the general population at early times. However, the GRBs with dominant reverse shock emission have fainter than average optical forward-shock emission at late time (> 10 ks). We find that GRBs with an identifiable reverse shock component show high magnetization parameter RB = "B,r/"B,f � 2 − 104. Our results are in agreement with the mildly magnetized baryonic jet model of GRBs

    Spectrophotometric analysis of GRB afterglow extinction curves with X-shooter

    Get PDF
    In this work we use gamma-ray burst (GRB) afterglow spectra observed with the VLT/X-shooter spectrograph to measure rest-frame extinction in GRB lines-of-sight by modeling the broadband near-infrared (NIR) to X-ray afterglow spectral energy distributions (SEDs). Our sample consists of nine Swift GRBs, eight of them belonging to the long-duration and one to the short-duration class. Dust is modeled using the average extinction curves of the Milky Way and the two Magellanic Clouds. We derive the rest-frame extinction of the entire sample, which fall in the range 0AV1.20 \lesssim {\it A}_{\rm V} \lesssim 1.2. Moreover, the SMC extinction curve is the preferred extinction curve template for the majority of our sample, a result which is in agreement with those commonly observed in GRB lines-of-sights. In one analysed case (GRB 120119A), the common extinction curve templates fail to reproduce the observed extinction. To illustrate the advantage of using the high-quality X-shooter afterglow SEDs over the photometric SEDs, we repeat the modeling using the broadband SEDs with the NIR-to-UV photometric measurements instead of the spectra. The main result is that the spectroscopic data, thanks to a combination of excellent resolution and coverage of the blue part of the SED, are more successful in constraining the extinction curves and therefore the dust properties in GRB hosts with respect to photometric measurements. In all cases but one the extinction curve of one template is preferred over the others. We show that the modeled values of the extinction and the spectral slope, obtained through spectroscopic and photometric SED analysis, can differ significantly for individual events. Finally we stress that, regardless of the resolution of the optical-to-NIR data, the SED modeling gives reliable results only when the fit is performed on a SED covering a broader spectral region.Comment: 17 pages, 7 figures, 4 tables, accepted for publication in Astronomy & Astrophysic

    Radio flares from gamma-ray bursts

    Get PDF
    We present predictions of centimeter and millimeter radio emission from reverse shocks in the early afterglows of gamma-ray bursts with the goal of determining their detectability with current and future radio facilities. Using a range of GRB properties, such as peak optical brightness and time, isotropic equivalent gamma-ray energy and redshift, we simulate radio light curves in a framework generalized for any circumburst medium structure and including a parametrization of the shell thickness regime that is more realistic than the simple assumption of thick- or thin-shell approximations. Building on earlier work by Mundell et al. (2007) and Melandri et al. (2010) in which the typical frequency of the reverse shock was suggested to lie at radio, rather than optical wavelengths at early times, we show that the brightest and most distinct reverse-shock radio signatures are detectable up to 0.1 -- 1 day after the burst, emphasizing the need for rapid radio follow-up. Detection is easier for bursts with later optical peaks, high isotropic energies, lower circumburst medium densities, and at observing frequencies that are less prone to synchrotron self-absorption effects - typically above a few GHz. Given recent detections of polarized prompt gamma-ray and optical reverse-shock emission, we suggest that detection of polarized radio/mm emission will unambiguously confirm the presence of low-frequency reverse shocks at early time

    A Reverse Shock and Unusual Radio Properties in GRB 160625B

    Get PDF
    We present multi-wavelength observations and modeling of the exceptionally bright long γ-ray burst GRB 160625B. The optical and X-ray data are well fit by synchrotron emission from a collimated blastwave with an opening angle of {\theta }_{j}\approx 3\buildrel{\circ}\over{.} 6 and kinetic energy of EK2×1051{E}_{K}\approx 2\times {10}^{51} erg, propagating into a low-density (n5×105n\approx 5\times {10}^{-5} cm−3) medium with a uniform profile. The forward shock is sub-dominant in the radio band; instead, the radio emission is dominated by two additional components. The first component is consistent with emission from a reverse shock, indicating an initial Lorentz factor of Γ0100{{\rm{\Gamma }}}_{0}\gtrsim 100 and an ejecta magnetization of {R}_{B}\approx 1\mbox{--}100. The second component exhibits peculiar spectral and temporal evolution and is most likely the result of scattering of the radio emission by the turbulent Milky Way interstellar medium (ISM). Such scattering is expected in any sufficiently compact extragalactic source and has been seen in GRBs before, but the large amplitude and long duration of the variability seen here are qualitatively more similar to extreme scattering events previously observed in quasars, rather than normal interstellar scintillation effects. High-cadence, broadband radio observations of future GRBs are needed to fully characterize such effects, which can sensitively probe the properties of the ISM and must be taken into account before variability intrinsic to the GRB can be interpreted correctly

    Spectrophotometric analysis of gamma-ray burst afterglow extinction curves with X-shooter

    Get PDF
    In this work we use gamma-ray burst (GRB) afterglow spectra observed with the VLT/X-shooter spectrograph to measure rest-frame extinction in GRB lines-of-sight by modeling the broadband near-infrared (NIR) to X-ray afterglow spectral energy distributions (SEDs). Our sample consists of nine Swift GRBs, eight of them belonging to the long-duration and one to the short-duration class. Dust is modeled using the average extinction curves of the Milky Way and the two Magellanic Clouds. We derive the rest-frame extinction of the entire sample, which fall in the range 0AV1.20 \lesssim {\it A}_{\rm V} \lesssim 1.2. Moreover, the SMC extinction curve is the preferred extinction curve template for the majority of our sample, a result which is in agreement with those commonly observed in GRB lines-of-sights. In one analysed case (GRB 120119A), the common extinction curve templates fail to reproduce the observed extinction. To illustrate the advantage of using the high-quality X-shooter afterglow SEDs over the photometric SEDs, we repeat the modeling using the broadband SEDs with the NIR-to-UV photometric measurements instead of the spectra. The main result is that the spectroscopic data, thanks to a combination of excellent resolution and coverage of the blue part of the SED, are more successful in constraining the extinction curves and therefore the dust properties in GRB hosts with respect to photometric measurements. In all cases but one the extinction curve of one template is preferred over the others. We show that the modeled values of the extinction and the spectral slope, obtained through spectroscopic and photometric SED analysis, can differ significantly for individual events. Finally we stress that, regardless of the resolution of the optical-to-NIR data, the SED modeling gives reliable results only when the fit is performed on a SED covering a broader spectral region

    Modeling the high-energy emission in GRB 110721A and implications on the early multiwavelength and polarimetric observations

    Get PDF
    GRB 110721A was detected by the Gamma-ray Burst Monitor and the Large Area Telescope (LAT) onboard the Fermi satellite and the Gamma-ray Burst Polarimeter onboard the IKAROS solar mission. Previous analysis done of this burst showed: i) a linear polarization signal with position angle stable (ϕp=160±11\phi_p= 160^\circ\pm11) and high degree of Π=8428+16\Pi=84^{+16}_{-28}, ii) an extreme peak energy of a record-breaking at 15±\pm2 MeV, and iii) a subdominant prompt thermal component observed right after the onset of this burst. In this paper, the LAT data around the reported position of GRB 110721A are analysed with the most recent software and then, the LAT light curve above 100 MeV was obtained. The LAT light curve is modelled in terms of adiabatic early-afterglow external shocks when the outflow propagates into a stellar wind. Additionally, we discuss the possible origins and also study the implications of the early-afterglow external shocks on the extreme peak energy observed at 15±\pm2 MeV, the polarization observations and the subdominant prompt thermal component.Comment: 9 pages and one figure. Accepted for publication in Ap

    The nature of the late achromatic bump in GRB 120326A

    Get PDF
    The long Swift{\it Swift} gamma-ray burst GRB 120326A at redshift z=1.798z=1.798 exhibited a multi-band light curve with a striking feature: a late-time, long-lasting achromatic rebrightening, rarely seen in such events. Peaking in optical and X-ray bands 35\sim 35 ks (12.5\sim 12.5 ks in the GRB rest frame) after the 70-s GRB prompt burst, the feature brightens nearly two orders of magnitude above the underlying optical power-law decay. Modelling the multiwavelength light curves, we investigate possible causes of the rebrightening in the context of the standard fireball model. We exclude a range of scenarios for the origin of this feature: reverse-shock flash, late-time forward shock peak due to the passage of the maximal synchrotron frequency through the optical band, late central engine optical/X-ray flares, interaction between the expanding blast wave and a density enhancement in the circumburst medium and gravitational microlensing. Instead we conclude that the achromatic rebrightening may be caused by a refreshed forward shock or a geometrical effect. In addition, we identify an additional component after the end of the prompt emission, that shapes the observed X-ray and optical light curves differently, ruling out a single overall emission component to explain the observed early time emission
    corecore