Evidence of a structural anomaly at 14 K in polymerised CsC60

We report the results of a high-resolution synchrotron X-ray powder diffraction study of polymerised CsC$_{60}$ in the temperature range 4 to 40 K. Its crystal structure is monoclinic (space group I2/m), isostructural with RbC$_{60}$. Below 14 K, a spontaneous thermal contraction is observed along both the polymer chain axis, $a$ and the interchain separation along [111], $d_1$. This structural anomaly could trigger the occurrence of the spin-singlet ground state, observed by NMR at the same temperature.Comment: 8 pages, 5 figures, submitte

Micro Finite Element models of the vertebral body: Validation of local displacement predictions

The estimation of local and structural mechanical properties of bones with micro Finite Element (microFE) models based on Micro Computed Tomography images depends on the quality bone geometry is captured, reconstructed and modelled. The aim of this study was to validate microFE models predictions of local displacements for vertebral bodies and to evaluate the effect of the elastic tissue modulus on model’s predictions of axial forces. Four porcine thoracic vertebrae were axially compressed in situ, in a step-wise fashion and scanned at approximately 39μm resolution in preloaded and loaded conditions. A global digital volume correlation (DVC) approach was used to compute the full-field displacements. Homogeneous, isotropic and linear elastic microFE models were generated with boundary conditions assigned from the interpolated displacement field measured from the DVC. Measured and predicted local displacements were compared for the cortical and trabecular compartments in the middle of the specimens. Models were run with two different tissue moduli defined from microindentation data (12.0GPa) and a back-calculation procedure (4.6GPa). The predicted sum of axial reaction forces was compared to the experimental values for each specimen. MicroFE models predicted more than 87% of the variation in the displacement measurements (R2 = 0.87–0.99). However, model predictions of axial forces were largely overestimated (80–369%) for a tissue modulus of 12.0GPa, whereas differences in the range 10–80% were found for a back-calculated tissue modulus. The specimen with the lowest density showed a large number of elements strained beyond yield and the highest predictive errors. This study shows that the simplest microFE models can accurately predict quantitatively the local displacements and qualitatively the strain distribution within the vertebral body, independently from the considered bone types

Precision of Digital Volume Correlation Approaches for Strain Analysis in Bone Imaged with Micro-Computed Tomography at Different Dimensional Levels

Accurate measurement of local strain in heterogeneous and anisotropic bone tissue is fundamental to understand the pathophysiology of musculoskeletal diseases, to evaluate the effect of interventions from preclinical studies, and to optimize the design and delivery of biomaterials. Digital volume correlation (DVC) can be used to measure the three-dimensional displacement and strain fields from micro-computed tomography (μCT) images of loaded specimens. However, this approach is affected by the quality of the input images, by the morphology and density of the tissue under investigation, by the correlation scheme, and by the operational parameters used in the computation. Therefore, for each application, the precision of the method should be evaluated. In this paper, we present the results collected from datasets analyzed in previous studies as well as new data from a recent experimental campaign for characterizing the relationship between the precision of two different DVC approaches and the spatial resolution of the outputs. Different bone structures scanned with laboratory source μCT or synchrotron light μCT (SRμCT) were processed in zero-strain tests to evaluate the precision of the DVC methods as a function of the subvolume size that ranged from 8 to 2,500 µm. The results confirmed that for every microstructure the precision of DVC improves for larger subvolume size, following power laws. However, for the first time, large differences in the precision of both local and global DVC approaches have been highlighted when SRμCT or in vivo μCT images were used instead of conventional ex vivo μCT. These findings suggest that in situ mechanical testing protocols applied in SRμCT facilities should be optimized to allow DVC analyses of localized strain measurements. Moreover, for in vivo μCT applications, DVC analyses should be performed only with relatively course spatial resolution for achieving a reasonable precision of the method. In conclusion, we have extensively shown that the precision of both tested DVC approaches is affected by different bone structures, different input image resolution, and different subvolume sizes. Before each specific application, DVC users should always apply a similar approach to find the best compromise between precision and spatial resolution of the measurements

Local displacement and strain uncertainties in different bone types by digital volume correlation of synchrotron microtomograms

Understanding bone mechanics at different hierarchical levels is fundamental to improve preclinical and clinical assessments of bone strength. Digital Volume Correlation (DVC) is the only experimental measurement technique used for measuring local displacements and calculating local strains within bones. To date, its combination with laboratory source micro-computed tomography (LS-microCT) data typically leads to high uncertainties, which limit its application. Here, the benefits of synchrotron radiation micro-computed tomography (SR-microCT) for DVC are reported. Specimens of cortical and trabecular bovine bone and murine tibiae, were each scanned under zero-strain conditions with an effective voxel size of 1.6 μm. In order to consider the effect of the voxel size, analyses were also performed on downsampled images with voxel size of 8 μm. To evaluate displacement and strain uncertainties, each pair of tomograms was correlated using a global DVC algorithm (ShIRT-FE). Displacement random errors for original SR-microCT ranged from 0.024 to 0.226 μm, depending on DVC nodal spacing. Standard deviation of strain errors was below 200 microstrain (ca. 1/10 of the strain associated with physiological loads) for correlations performed with a measurement spatial resolution better than 40 μm for cortical bovine bone (240 μm for downsampled images), 80 μm for trabecular bovine bone (320 μm for downsampled images) and murine tibiae (120 μm for downsampled images). This study shows that the uncertainties of SR-microCT-based DVC, estimated from repeated scans, are lower than those obtained from LS-microCT-based DVC on similar specimens and low enough to measure accurately the local deformation at the tissue level

Reliability and inter-observer agreement of dermoscopic diagnosis of melanoma and melanocytic naevi

The aim of this study was to analyse the reliability and the inter- observer agreement of dermoscopy in the diagnosis of melanocytic skin lesions. Nine dermatologists, with a different training experience and who routinely used dermoscopy in different hospitals in Italy, evaluated clinical and dermoscopy photographs of 15 melanocytic lesions (four invasive melanomas, four histologically common naevi, and seven naevi with histological atypia). A further series of dermoscopic photographs of 40 melanocytic lesions was evaluated to quantify inter-observer concordance in recognizing dermoscopic criteria. Compared to the true (histological) diagnosis, clinical diagnosis (categories: melanoma, common naevus, atypical naevus) was correct in 40% of cases (range, 27-53%). The percentage raised to 55% (40-73%) by the use of dermoscopy, with an average improvement of 15.6%. Concerning melanoma, clinical diagnosis resulted in a sensitivity of 41.9%, specificity of 77.8%, positive predictive value (PPV) of 36.1%, negative predictive value (NPV) of 81.8%. By using dermoscopy, an improvement of diagnostic performance was found (sensitivity 75%, specificity 88.8%, VPP 71.0%, VPN 90.7%). The inter-observer agreement in melanoma diagnosis, by using dermoscopy, was similar to that obtained by clinical examination (k statistics = 0.54 and 0.52, respectively). Concerning dermoscopic criteria, the best agreement among observers was found for pseudopods, a dermoscopic parameter related to the radial growth phase of melanoma. We conclude that dermoscopy is an useful tool for a non-invasive diagnosis of melanocytic skin lesions, improving the diagnostic performance compared to clinical examination

Revealing the fast atomic motion of network glasses

Still very little is known on the relaxation dynamics of glasses at the microscopic level due to the lack of experiments and theories. It is commonly believed that glasses are in a dynamical arrested state, with relaxation times too large to be observed on human time scales. Here we provide the experimental evidence that glasses display fast atomic rearrangements within a few minutes, even in the deep glassy state. Following the evolution of the structural relaxation in a sodium silicate glass, we find that this fast dynamics is accompanied by the absence of any detectable aging, suggesting a decoupling of the relaxation time and the viscosity in the glass. The relaxation time is strongly affected by the network structure with a marked increase at the mesoscopic scale associated with the ion-conducting pathways. Our results modify the conception of the glassy state and asks for a new microscopic theory

Multiscale Bone Remodelling with Spatial P Systems

Many biological phenomena are inherently multiscale, i.e. they are characterized by interactions involving different spatial and temporal scales simultaneously. Though several approaches have been proposed to provide "multilayer" models, only Complex Automata, derived from Cellular Automata, naturally embed spatial information and realize multiscaling with well-established inter-scale integration schemas. Spatial P systems, a variant of P systems in which a more geometric concept of space has been added, have several characteristics in common with Cellular Automata. We propose such a formalism as a basis to rephrase the Complex Automata multiscaling approach and, in this perspective, provide a 2-scale Spatial P system describing bone remodelling. The proposed model not only results to be highly faithful and expressive in a multiscale scenario, but also highlights the need of a deep and formal expressiveness study involving Complex Automata, Spatial P systems and other promising multiscale approaches, such as our shape-based one already resulted to be highly faithful.Comment: In Proceedings MeCBIC 2010, arXiv:1011.005

Epífitos vasculares predominantes em zonas ecológicas de forófitos, Santa Catarina, Brasil.

Espécies epifíticas apresentam formas, dimensões e biomassa distintas e colonizam os forófitos em regime temporário ou permanente. O presente trabalho teve como objetivo avaliar a distribuição de epífitos vasculares de biomassa visualmente dominante nas zonas ecológicas dos forófitos (fuste, copa interna e copa externa) da Floresta Ombrófila Densa de Santa Catarina. Os estudos foram realizados em 13 unidades amostrais, no interior das quais foram selecionados oito forófitos. Para a coleta dos dados, foi empregada a técnica de arvorismo e observação a partir do solo. De modo geral, as espécies registradas puderam ser classificadas como holoepífitos característicos e facultativos, e hemiepífitos primários e secundários. A família Bromeliaceae destacou-se dentre as demais nas três zonas ecológicas dos forófitos, reunindo as espécies com maiores biomassas. Relacionando as categorias ecológicas, os holoepífitos característicos, como bromeliáceas e orquidáceas, concentraram-se na região da copa e os hemiepífitos, como as aráceas Philodendron loefgrenii e Philodendron appendiculatum, foram encontradas geralmente na região do fuste.Edição especial: II Seminário sobre Inventário Florestal

Muon spin rotation and relaxation in magnetic materials

A review of the muon spin rotation and relaxation ($\mu$SR) studies on magnetic materials published from July 1993 is presented. It covers the investigation of magnetic phase diagrams, of spin dynamics and the analysis of the magnetic properties of superconductors. We have chosen to focus on selected experimental works in these different topics. In addition, a list of published works is provided.Comment: Review article, 59 pages, LaTeX with IoP macro