Post-traumatic malunion of the proximal phalanx of the finger. Medium-term results in 24 cases treated by "in situ" osteotomy

We report the clinical and radiographic medium-term results obtained for 20 patients (24 fingers) treated surgically for post-traumatic malunion of the proximal phalanx of the finger. In all cases we performed a corrective osteoclasia or osteotomy at the site of malunion, followed by miniplate and screw fixation or by screw fixation only. The corrective osteoclasia was performed when malalignment was addressed within six weeks after injury. Two patients who had two fractures underwent additional surgery (tenolysis and/or capsulolysis) to improve function and ROM. At the final follow-up, at a mean of 24 months after corrective surgery, good or excellent clinical and radiographic results were obtained in all the patients. The pseudoclaw deformity disappeared in all cases in which a volar angulation deformity was present. An average improvement of about 30% in the range of motion of the MP and PIP joints was observed; only 4 patients complained of mild pain at the maximum degrees of articular excursion of the MP and PIP joints. All the patients presented an improvement in grip strength. The mean DASH score in our series was 5 points. In two of the four cases treated by an intra-articular corrective osteotomy, mild radiographic signs of osteoarthritis at the MP joint were present. The data for this study confirm that "in situ" osteotomy stabilized by miniplates and/or screws is an effective procedure to correct post-traumatic malunions of the proximal phalanges of the fingers

Casein genetic variants in ovine Merino breed

The genetic polymorphism on Merina ewe milk was investigated, using polyacrylamide gel electrophoresis at pH 8.6 and ultra thin-layer isoelectric focusing techniques, according to Krause et al. (1988), and Chianese et al. (1992). The casein fractions identified were: - Seven as1-casein phenotypes: CC, BB, BC, AB, AC, BD and CD (Chianese et al.,1996). - Three as2-casein phenotypes, provisionally nominated F, S, and I. - Three b-casein phenotypes, also provisionally nominated K, L and M, because their genetic segregation is not well known yet. The phenotypical distribution of the observed casein fractions and their adjustment to a normal distribution is presented.El polimorfismo genético de la leche de oveja Merina fue investigado mediante electroforesis en gel de poliacrilamida a pH 8,6 (PAGE) e isoelectroenfoque en gel ultrafino (UTLIEF), siguiendo las técnicas descritas por Krause et al. (1988) y Chianese et al. (1992). Dentro de las fracciones caseínicas se identificaron siete fenotipos de as1-caseína (CC, BB, BC, AB, AC, BD y CD), según la nomenclatura establecida por Chianese et al. (1996). Mientras que, a nivel de as2- y b-caseína se han observado tres perfiles electroforéticos, denominados provisionalmente F, S e I; K, L y M respectivamente, ya que no se conoce su segregación genética. Se presenta la distribución fenotípica de las fracciones caseínicas estudiadas, así como su ajuste a la distribución normal

Multiple congenital bilateral trigger digits in a 2-year-old child: case report

Trigger finger is a rare condition in children. In this paper, we report on a 2-year-old boy with multiple congenital bilateral trigger digits. The patient had no history of perinatal trauma, viral or bacterial infections, or metabolic disorders. The patient was treated with physiotherapy for one year. At the one-year follow-up, the boy presented with six trigger fingers (3 on the right hand, 3 on the left hand). Neither thumb was involved. The six trigger fingers were treated surgically: first, the right-hand trigger fingers and, six months later, those of the left hand. After each operation, a 4-week brace in extension was applied to the operated hand. The symptoms were completely resolved after surgical treatment. Many authors have recommended surgical release for the treatment of trigger finger in children; empirical treatment with physiotherapy may be an option when symptoms present or appear at an older age

ASPETTI DELLA PRODUZIONE DEI PICCOLI RUMINANTI CON IMPATTO SULLA SALUTE UMANA

Negli ultimi anni l’attenzione del consumatore si è sempre più orientata verso le caratteristiche nutrizionali degli alimenti. Queste proprietà sono di grande importanza anche per quanto riguarda le produzioni dei piccoli ruminanti. Il presente lavoro ha lo scopo di riassumere i principali risultati emersi dal progetto di ricerca “Aspetti della produzione dei piccoli ruminanti con particolare impatto sulla salute umana”. Sono stati analizzati mediante i metodi descritti in letteratura: 1) i polimorfismi genetici dei biopeptidi del latte dei piccoli ruminanti; 2) le attività di alcuni enzimi della membrana del globulo di grasso e la frazione lipidica del latte ovino; 3) la qualità nutrizionale del latte e del formaggio ovino in relazione all’intensità di pascolamento; 4) le componenti bioattive di siero e scotta residui alla produzione dei formaggi ovi-caprini; 5) la resistenza genetica alle encefalopatie spongiformi trasmissibili e l’efficienza economica e biologica in razze ovine. I risultati ottenuti evidenziano, da svariati punti di vista, numerose potenzialità legate alle produzioni dei piccoli ruminanti e alle loro ricadute sulla salute umana

Author correction : a global database for metacommunity ecology, integrating species, traits, environment and space

Correction to: Scientific Data https://doi.org/10.1038/s41597-019-0344-7, published online 08 January 202

A new fungal isolates applicated to bovine skin in beamhouse processes

Content: Beamhouse area is an important step in leather technology, either in the final quality of the leather or in the contribution to the contamination of effluents. In unhairing process, the use of enzymes as sulphide assistants can reduce sulfhidric gas emissions to reach permitted levels for health. The characterization of enzymatic extracts allows controlling the proteolysis mechanism so that its action does not attack the reticular structure. A new fungal enzyme extracts were applied on submerged bovine skin in the soaking and unhairing steps. Fungal strains were isolated from alkaline soils of coast of Buenos Aires province and enzymatic extracts (EE) were obtained by submerged culture with bovine hair waste from hair-saving unhairing process as inducer in the production of keratinolytic enzymes. This activity was determined by quantitative test and the most productive strains were selected: Clonostachys rosea (CR), Emericellopsis minima (EM), Paecilomyces lilacinus (PL), Penicillium sp (Psp), Fusarium oxysporum (FO), Acremonium sp (A) and an unidentified filamentous fungus strain with sterile yellow mycelium (SYM). EE were tested at laboratory scale on submerged bovine skin with biocide 0,2% w/w wet skin, anionic 0,1% and non-ionic 0,5% tensioactives in soaking and unhairing respectively and incubated 48 h at 37°C in shaking thermostatic bath. Controls were tested in the same conditions without EE. Morphological changes in the skin were observed by scanning electron microscopy (SEM). Pieces of bovine skin were fixed, post-fixed in formaldehyde 4% and dehydrated in alcohol solutions, treated by critical point drying, metalized and analyzed in SEM. It was observed with FO, EM and A extracts empty hair follicles, absence of epidermis, papillary layer of dermis exposed, hairs enclosed by detached hair follicle sheaths and collagen fibers without characteristic patterns. With PL and SYM EE some hairs were detached while Psp and CR EE did not produce changes. In control samples epidermis and hair without modification were observed. In the quantitative test, keratinolytic activities increased in the following order: A<PL<Psp<CR<FO<SYM. Submerged culture with keratin as inductor produced keratinolytic enzymes useful for unhairing step. Fusarium oxysporum extract showed the greatest effect on the skin, thus the relationship between keratinolytic activity and depilatory effect was found. However, it is necessary to find the optimal conditions to avoid the damage of collagen and enable its application as a sustainable technology. Take-Away: A new fungal isolates applicated to bovine skin in beamhouse processe

Author correction : a global database for metacommunity ecology, integrating species, traits, environment and space

Correction to: Scientific Data https://doi.org/10.1038/s41597-019-0344-7, published online 08 January 202

Resonant Rayleigh scattering of exciton-polaritons in multiple quantum wells

A theoretical concept of resonant Rayleigh scattering (RRS) of exciton-polaritons in multiple quantum wells (QWs) is presented. The optical coupling between excitons in different QWs can strongly affect the RRS dynamics, giving rise to characteristic temporal oscillations on a picosecond scale. Bragg and anti-Bragg arranged QW structures with the same excitonic parameters are predicted to have drastically different RRS spectra. Experimental data on the RRS from multiple QWs show the predicted strong temporal oscillations at small scattering angles, which are well explained by the presented theory

Shape Retrieval of Non-rigid 3D Human Models

3D models of humans are commonly used within computer graphics and vision, and so the ability to distinguish between body shapes is an important shape retrieval problem. We extend our recent paper which provided a benchmark for testing non-rigid 3D shape retrieval algorithms on 3D human models. This benchmark provided a far stricter challenge than previous shape benchmarks. We have added 145 new models for use as a separate training set, in order to standardise the training data used and provide a fairer comparison. We have also included experiments with the FAUST dataset of human scans. All participants of the previous benchmark study have taken part in the new tests reported here, many providing updated results using the new data. In addition, further participants have also taken part, and we provide extra analysis of the retrieval results. A total of 25 different shape retrieval methods are compared

Implementación de un proyecto de inteligencia de negocios en la empresa constructora GyM S.A.

El presente proyecto se realizó para la Empresa GyM S.A., esta organización se dedica a la construcción de obras civiles, obras electromecánicas y edificaciones, además brinda servicios a las principales Empresas del Perú y también cuenta con proyectos fuera del país. El propósito de nuestra investigación es demostrar cómo la Inteligencia de Negocios puede dar solución a la problemática actual de la corporación que, debido a la enorme cantidad de datos que procesan los sistemas con que trabajan, actualmente no cuentan con un control ni con una manera automatizada de consolidar toda esa información. Nuestra propuesta consta de integrar los sistemas de la empresa mediante técnicas presentadas por la Inteligencia de Negocios, con el fin, de que en base a la construcción de indicadores, reportes de análisis de la información, entre otras herramientas, podamos brindar una solución que sea de apoyo para la toma de decisiones en la empresa y así la alta gerencia pueda ejecutar las medidas correctivas en caso se amerite. Nuestro análisis demostrará que la solución es sumamente rentable, con respecto al costo que implica el proceso de realizar una consolidación manual de la información mensualmente, como es requerido. Así mismo, muestra efectos positivos en la utilización de Inteligencia de Negocios para la organización, debido a la calidad y mejor control de la información.Tesi