Ferroelectric Dead Layer Driven by a Polar Interface

Based on first-principles and model calculations we investigate the effect of polar interfaces on the ferroelectric stability of thin-film ferroelectrics. As a representative model, we consider a TiO2-terminated BaTiO3 film with LaO monolayers at the two interfaces that serve as doping layers. We find that the polar interfaces create an intrinsic electric field that is screened by the electron charge leaking into the BaTiO3 layer. The amount of the leaking charge is controlled by the boundary conditions which are different for three heterostructures considered, namely Vacuum/LaO/BaTiO3/LaO, LaO/BaTiO3, and SrRuO3/LaO/BaTiO3/LaO. The intrinsic electric field forces ionic displacements in BaTiO3 to produce the electric polarization directed into the interior of the BaTiO3 layer. This creates a ferroelectric dead layer near the interfaces that is non-switchable and thus detrimental to ferroelectricity. Our first-principles and model calculations demonstrate that the effect is stronger for a larger effective ionic charge at the interface and longer screening length due to a stronger intrinsic electric field that penetrates deeper into the ferroelectric. The predicted mechanism for a ferroelectric dead layer at the interface controls the critical thickness for ferroelectricity in systems with polar interfaces.Comment: 33 Pages, 5 figure

Coexistence of Magnetic Order and Two-dimensional Superconductivity at LaAlO3_3/SrTiO3_3 Interfaces

A two dimensional electronic system with novel electronic properties forms at the interface between the insulators LaAlO$_3$ and SrTiO$_3$. Samples fabricated until now have been found to be either magnetic or superconducting, depending on growth conditions. We combine transport measurements with high-resolution magnetic torque magnetometry and report here evidence of magnetic ordering of the two-dimensional electron liquid at the interface. The magnetic ordering exists from well below the superconducting transition to up to 200 K, and is characterized by an in-plane magnetic moment. Our results suggest that there is either phase separation or coexistence between magnetic and superconducting states. The coexistence scenario would point to an unconventional superconducting phase in the ground state.Comment: 10 pages, 4 figure

Micro-Hall Magnetometry Studies of Thermally Assisted and Pure Quantum Tunneling in Single Molecule Magnet Mn12-Acetate

We have studied the crossover between thermally assisted and pure quantum tunneling in single crystals of high spin (S=10) uniaxial single molecule magnet Mn12-acetate using micro-Hall effect magnetometry. Magnetic hysteresis experiments have been used toinvestigate the energy levels that determine the magnetization reversal as a function of magnetic field and temperature. These experiments demonstrate that the crossover occurs in a narrow (~0.1 K) or broad (~1 K) temperature interval depending on the magnitude and direction of the applied field. For low external fields applied parallel to the easy axis, the energy levels that dominate the tunneling shift abruptly with temperature. In the presence of a transverse field and/or large longitudinal field these energy levels change with temperature more gradually. A comparison of our experimental results with model calculations of this crossover suggest that there are additional mechanisms that enhance the tunneling rate of low lying energy levels and broaden the crossover for small transverse fields.Comment: 5 pages, 5 figure

Instability, Intermixing and Electronic Structure at the Epitaxial LaAlO3/SrTiO3(001) Heterojunction

The question of stability against diffusional mixing at the prototypical LaAlO3/SrTiO3(001) interface is explored using a multi-faceted experimental and theoretical approach. We combine analytical methods with a range of sensitivities to elemental concentrations and spatial separations to investigate interfaces grown using on-axis pulsed laser deposition. We also employ computational modeling based on the density function theory as well as classical force fields to explore the energetic stability of a wide variety of intermixed atomic configurations relative to the idealized, atomically abrupt model. Statistical analysis of the calculated energies for the various configurations is used to elucidate the relative thermodynamic stability of intermixed and abrupt configurations. We find that on both experimental and theoretical fronts, the tendency toward intermixing is very strong. We have also measured and calculated key electronic properties such as the presence of electric fields and the value of the valence band discontinuity at the interface. We find no measurable electric field in either the LaAlO3 or SrTiO3, and that the valence band offset is near zero, partitioning the band discontinuity almost entirely to the conduction band edge. Moreover, we find that it is not possible to account for these electronic properties theoretically without including extensive intermixing in our physical model of the interface. The atomic configurations which give the greatest electrostatic stability are those that eliminate the interface dipole by intermixing, calling into question the conventional explanation for conductivity at this interface - electronic reconstruction. Rather, evidence is presented for La indiffusion and doping of the SrTiO3 below the interface as being the cause of the observed conductivity

Droplet Behavior within an LPP Ambiance

This paper deals with the numerical simulation of droplet dispersion and evaporation within an LPP (Lean Premix Prevaporized) burner. The Eulerian-Lagrangian approach was used for this purpose, and a fully two way-coupling was accounted for. For the phase transition, a non-equilibrium evaporation model was applied that differs strongly from the equilibrium one where there are high evaporation rates. The non-equilibrium conditions were fulfilled in the investigated configuration, as the droplets at the inlet had a mean diameter of 50mm. The numerical results of water droplet velocities, corresponding fluctuations, and diameters were compared with experimental data. Good agreement was found

WAP four-disulfide core domain protein 2 gene(WFDC2) is a target of estrogen in ovarian cancer cells

BACKGROUND: WAP four-disulfide core domain protein 2 (WFDC2) shows a tumor-restricted upregulated pattern of expression in ovarian cancer. METHODS: We investigated the role of estradiol (E2) on cell growth in estrogen-sensitive or estrogen-insensitive ovarian cancer cell lines. Real-time (RT)-PCR and western blotting were used to examine the expression of WFDC2 at RNA and protein levels. Growth traits of cells transfected with WFDC2-shRNA or blank control were assessed using MMT arrays. Cell apoptosis was analyzed using annexin V-FITC/PI and flow cytometry. Estrogen receptor expression was evaluated using RT-PCR and flow cytometry. Apoptosis-related proteins induced by E2 directly and indirectly were determined using an antibody array comparing cells transfected with WFDC2- shRNA or a blank control. RESULTS: High-dose (625 ng/ml) E2 increased the expression of WFDC2 in HO8910 cells at both the mRNA and protein levels. However, E2 had no effect on WFDC2 expression in estrogen-insensitive SKOV3 cells. Of interest, knockdown of WFDC2 enabled a considerable estrogen response in SKOV3 cells in terms of proliferation, similar to estrogen-responsive HO8910 cells. This transformation of SKOV3 cells into an estrogen-responsive phenotype was accompanied by upregulation of estrogen receptor beta (ERß) and an effect on cell apoptosis under E2 treatment by regulating genes related to cell proliferation and apoptosis. CONCLUSIONS: We postulate that increased WFDC2 expression plays an important role in altering the estrogen pathway in ovarian cancer, and the identification of WFDC2 as a new player in endocrine-related cancer encourages further studies on the significance of this gene in cancer development and therapy. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1186/s13048-015-0210-y) contains supplementary material, which is available to authorized users

Influence of Thickening Factor Treatment on Predictions of Spray Flame Properties Using the ATF Model and Tabulated Chemistry

Different strategies to account for the heat and mass transfer between liquid droplets and their carrier phase within the Artificially Thickened Flame (ATF) approach are analyzed and compared. Herein, two approaches are introduced to take into account the droplet movement relative to the thickened flame front orientation. While the first approach achieves this behavior through scalar modifications in the droplet temperature and mass evolution equations, the second one introduces a trajectory modification within the thickened flame front. Both approaches, referred to as projection and refraction correction, are first compared to state of the art methods in a simplified two-dimensional configuration, and then in a complex turbulent spray flame. The investigated spray flame corresponds to the operating condition EtF6 of the Sydney Spray Burner. The analysis showed that: (1) A consideration of a simplified configuration is insufficient to fully uncover the performance of the different approaches. (2) While the proposed approaches performed best in the two-dimensional configuration, only the projection method outperforms the remaining ones in the turbulent spray flame. (3) The formulation to consider the flame thickening has a strong effect on global flame properties, combustion regime distribution as well as carrier and liquid phase statistics

An overview of the first decade of PollyNET : an emerging network of automated Raman-polarization lidars for continuous aerosol profiling

© Author(s) 2016. This work is distributed under the Creative Commons Attribution 3.0 LicenseA global vertically resolved aerosol data set covering more than 10 years of observations at more than 20 measurement sites distributed from 63° N to 52° S and 72° W to 124° E has been achieved within the Raman and polarization lidar network PollyNET. This network consists of portable, remote-controlled multiwavelength-polarization-Raman lidars (Polly) for automated and continuous 24/7 observations of clouds and aerosols. PollyNET is an independent, voluntary, and scientific network. All Polly lidars feature a standardized instrument design with different capabilities ranging from single wavelength to multiwavelength systems, and now apply unified calibration, quality control, and data analysis. The observations are processed in near-real time without manual intervention, and are presented online at http://polly.tropos.de/. The paper gives an overview of the observations on four continents and two research vessels obtained with eight Polly systems. The specific aerosol types at these locations (mineral dust, smoke, dust-smoke and other dusty mixtures, urban haze, and volcanic ash) are identified by their Ångström exponent, lidar ratio, and depolarization ratio. The vertical aerosol distribution at the PollyNET locations is discussed on the basis of more than 55 000 automatically retrieved 30 min particle backscatter coefficient profiles at 532 nm as this operating wavelength is available for all Polly lidar systems. A seasonal analysis of measurements at selected sites revealed typical and extraordinary aerosol conditions as well as seasonal differences. These studies show the potential of PollyNET to support the establishment of a global aerosol climatology that covers the entire troposphere.Peer reviewe