High Power Ultrasound to Recover Fine Particles in Flotation Process

9 pages, 6 figures.-- Communication presented at: Forum Acusticum Sevilla 2002 (Sevilla, Spain, 16-20 Sep 2002), comprising: 3rd European Congress on Acoustics; XXXIII Spanish Congress on Acoustics (TecniAcústica 2002); European and Japanese Symposium on Acoustics; 3rd Iberian Congress on Acoustics.-- Special issue of the journal Revista de Acústica, Vol. XXXIII, year 2002.The flotation process to recover useful substances from minerals has been used for dozens of years. For the flotation, air bubbles in a water solution of finely ground mineral particles must be introduced. The particles were prepared with chemical substances (surfactants) to be caught by the bubbles.Some attempts were made to improve the whole process, the best results reported were obtained for a technique called the "high energy" flotation experiments, [1] [2][3]. It seems that the recovering of the useful substances can be improved if some energy can be injected to the reactor with the metallurgic pulp. This suggests that an ultrasonic field can also improve the recovering in flotation. In this paper an application of acoustic cavitation to the flotation process is explored.The authors would like to thank the financial support of project FONDECYT 1010243.Peer reviewe

Ressursinnsatsen i medisinsk og helsefaglig FoU i 2013: En analyse basert på FoU-statistisk materiale

Denne rapporten beskriver ressursinnsatsen innenfor medisinsk og helsefaglig forskning og utviklingsarbeid (FoU) i 2013. Rapporten er i hovedsak basert på eksisterende datamateriale hentet fra den nasjonale FoU-statistikken, men andre datakilder er også benyttet. Tilsvarende oversikter over FoU-innsatsen til medisin og helsefag er utarbeidet for 2009 og 2011. NIFU er ansvarlig for FoU-statistikken i universitets- og høgskolesektoren, instituttsektoren samt helseforetakene, og hovedvekt er lagt på innsatsen her. For å få et totalbilde for Norges innsats på området har vi også med noen tall for medisinrelatert FoU i næringslivet og for medisinsk forskning i de andre nordiske landene

Incompressible Quantum Liquids and New Conservation Laws

In this letter we investigate a class of Hamiltonians which, in addition to the usual center-of-mass (CM) momentum conservation, also have center-of-mass position conservation. We find that regardless of the particle statistics, the energy spectrum is at least q-fold degenerate when the filling factor is $p/q$, where $p$ and $q$ are coprime integers. Interestingly the simplest Hamiltonian respecting this type of symmetry encapsulates two prominent examples of novel states of matter, namely the fractional quantum Hall liquid and the quantum dimer liquid. We discuss the relevance of this class of Hamiltonian to the search for featureless Mott insulators.Comment: updated version, to be published by PR

137,138,139^{137,138,139}La(nn, γ\gamma) cross sections constrained with statistical decay properties of 138,139,140^{138,139,140}La nuclei

The nuclear level densities and $\gamma$-ray strength functions of $^{138,139,140}$La were measured using the $^{139}$La($^{3}$He, $\alpha$), $^{139}$La($^{3}$He, $^{3}$He$^\prime$) and $^{139}$La(d, p) reactions. The particle-$\gamma$ coincidences were recorded with the silicon particle telescope (SiRi) and NaI(Tl) (CACTUS) arrays. In the context of these experimental results, the low-energy enhancement in the A$\sim$140 region is discussed. The $^{137,138,139}$La($n, \gamma)$ cross sections were calculated at $s$- and $p$-process temperatures using the experimentally measured nuclear level densities and $\gamma$-ray strength functions. Good agreement is found between $^{139}$La($n, \gamma)$ calculated cross sections and previous measurements

Design and RF measurements of a 5 GHz 500 kW window for the ITER LHCD system

International audienceCEA/IRFM is conducting R&D efforts in order to validate the critical RF components of the 5 GHz ITER LHCD system, which is expected to transmit 20 MW of RF power to the plasma. Two 5 GHz 500 kW BeO pill-box type window prototypes have been manufactured in 2012 by the PMB Company, in close collaboration with CEA/IRFM. Both windows have been validated at low power, showing good agreement between measured and modeling, with a return loss better than 32 dB and an insertion loss below 0.05 dB. This paper reports on the window RF design and the low power measurements. The high power tests up to 500kW have been carried out in March 2013 in collaboration with NFRI. Results of these tests are also reported. In the current ITER LHCD design, 20 MW Continuous Wave (CW) of Radio-Frequency power at 5 GHz are expected to be generated and transmitted to the plasma. In order to separate the vacuum vessel pressure from the cryostat waveguide pressure, forty eight 5 GHz 500kW CW windows are to be assembled on the waveguides at the equatorial port flange. For nuclear safety reasons, forty eight additional windows could be located in the cryostat section, to separate and monitor the cryostat waveguide pressure from the exterior transmission line pressure. These windows are identified as being one of the main critical components for the ITER LHCD system since first ITER LHCD studies [1] [2] [3] or more recently [4] [5] , and clearly require an important R&D effort. In this context and even if the LHCD system is not part of the construction baseline, the CEA/IRFM is conducting a R&D effort in order to validate a design and the performances of these RF windows. In order to begin the assessment of this need, two 5 GHz 500 kW/5 s pill-box type windows prototypes have been manufactured in 2012 by the PMB Company in close collaboration with the CEA/IRFM [6]. The section 2 of this paper reports the RF and mechanical design of a 5 GHz window. Some features of the mechanical design and the experimental RF measurements at low power are reported in section 3. High power results, made in collaboration with NFRI, are detailed in section 4. The development of CW windows is discussed in the conclusion. 2-RF AND MECHANICAL DESIGN The proposed 5 GHz RF window is based on a pill-box design [2] , i.e. a ceramic brazed in portion of a circular waveguide, connected on either side to a rectangular waveguide section. Typical design rules of thumb of such device are circular section diameter about the same size of the diagonal of the rectangular waveguide (cf. FIGURE 1). Without taking into account the ceramic, the circular section length is approximately half a guided wavelength of the circular TE 11 mode, in order for the device to act as a half-wave transformer. Once optimized, taking into account the ceramic, matching is correct only for a narrow band of frequency and is very sensitive to the device dimensions and the ceramic relative permittivity. The heat losses in the ceramic, which have to be extracted by an active water cooling, depends on the inside electric field topology and of ceramic dielectric loss (loss tangent). Undesirable modes due to parasitic resonances can be excited in the ceramic volume, raising the electric field an

Wave modelling - the state of the art

This paper is the product of the wave modelling community and it tries to make a picture of the present situation in this branch of science, exploring the previous and the most recent results and looking ahead towards the solution of the problems we presently face. Both theory and applications are considered. The many faces of the subject imply separate discussions. This is reflected into the single sections, seven of them, each dealing with a specific topic, the whole providing a broad and solid overview of the present state of the art. After an introduction framing the problem and the approach we followed, we deal in sequence with the following subjects: (Section) 2, generation by wind; 3, nonlinear interactions in deep water; 4, white-capping dissipation; 5, nonlinear interactions in shallow water; 6, dissipation at the sea bottom; 7, wave propagation; 8, numerics. The two final sections, 9 and 10, summarize the present situation from a general point of view and try to look at the future developments

Usefulness and limitation of dobutamine stress echocardiography to predict acute response to cardiac resynchronization therapy.

peer reviewedBackground: It has been hypothesized that a long-term response to cardiac resynchronization therapy (CRT) could correlate with myocardial viability in patients with left ventricular (LV) dysfunction. Contractile reserve and viability in the region of the pacing lead have not been investigated in regard to acute response after CRT. Methods: Fifty-one consecutive patients with advanced heart failure, LV ejection fraction ≤ 35%, QRS duration > 120 ms, and intraventricular asynchronism ≥ 50 ms were prospectively included. The week before CRT implantation, the presence of viability was evaluated using dobutamine stress echocardiography. Acute responders were defined as a ≥15% increase in LV stroke volume. Results: The average of viable segments was 5.8 ± 1.9 in responders and 3.9 ± 3 in nonresponders (P = 0.03). Viability in the region of the pacing lead had an excellent sensitivity (96%), but a low specificity (56%) to predict acute response to CRT. Mitral regurgitation (MR) was reduced in 21 patients (84%) with acute response. The presence of MR was a poor predictor of response (sensibility 93% and specificity 17%). However, combining the presence of MR and viability in the region of the pacing lead yields a sensibility (89%) and a specificity (70%) to predict acute response to CRT. Conclusion: Myocardial viability is an important factor influencing acute hemodynamic response to CRT. In acute responders, significant MR reduction is frequent. The combined presence of MR and viability in the region of the pacing lead predicts acute response to CRT with the best accuracy