A new internally heated diamond anvil cell system for time-resolved optical and x-ray measurements

We have developed a new internally heated diamond anvil cell (DAC) system for in situ high-pressure and high-temperature x-ray and optical experiments. We have adopted a self-heating W/Re gasket design allowing for both sample confinement and heating. This solution has been seldom used in the past but proved to be very efficient to reduce the size of the heating spot near the sample region, improving heating and cooling rates as compared to other resistive heating strategies. The system has been widely tested under high-temperature conditions by performing several thermal emission measurements. A robust relationship between electric power and average sample temperature inside the DAC has been established up to about 1500 K by a measurement campaign on different simple substances. A micro-Raman spectrometer was used for various in situ optical measurements and allowed us to map the temperature distribution of the sample. The distribution resulted to be uniform within the typical uncertainty of these measurements (5% at 1000 K). The high-temperature performances of the DAC were also verified in a series of XAS (x-ray absorption spectroscopy) experiments using both nano-polycrystalline and single-crystal diamond anvils. XAS measurements of germanium at 3.5 GPa were obtained in the 300 K-1300 K range, studying the melting transition and nucleation to the crystal phase. The achievable heating and cooling rates of the DAC were studied exploiting a XAS dispersive setup, collecting series of near-edge XAS spectra with sub-second time resolution. An original XAS-based dynamical temperature calibration procedure was developed and used to monitor the sample and diamond temperatures during the application of constant power cycles, indicating that heating and cooling rates in the 100 K/s range can be easily achieved using this device

The Role of Oxidative Stress and Lipid Peroxidation in Ventricular Remodeling Induced by Tobacco Smoke Exposure after Myocardial Infarction

OBJECTIVE: To evaluate the roles of oxidative stress and lipid peroxidation in the ventricular remodeling that is induced by tobacco smoke exposure after myocardial infarction.METHODS: After induced myocardial infarction, rats were allocated into two groups: C (control, n=25) and ETS (exposed to tobacco smoke, n=24). After 6 months, survivors were submitted to echocardiogram and biochemical analyses.RESULTS: Rats in the ETS group showed higher diastolic (C = 1.52 +/- 0.4 mm(2), ETS = 1.95 +/- 0.4 mm(2); p=0.032) and systolic (C = 1.03 +/- 0.3, ETS = 1.36 +/- 0.4 mm(2)/g; p=0.049) ventricular areas, adjusted for body weight. The fractional area change was smaller in the ETS group (C = 30.3 +/- 10.1 %, ETS = 19.2 +/- 11.1 %; p=0.024) and E/A ratios were higher in ETS animals (C = 2.3 +/- 2.2, ETS = 5.1 +/- 2.5; p=0.037). ETS was also associated with a higher water percentage in the lung (C = 4.8 (4.3-4.8), ETS = 5.5 (5.3-5.6); p=0.013) as well as higher cardiac levels of reduced glutathione (C = 20.7 +/- 7.6 nmol/mg of protein, ETS = 40.7 +/- 12.7 nmol/mg of protein; p=0.037) and oxidized glutathione (C = 0.3 +/- 0.1 nmol/g of protein, ETS = 0.9 +/- 0.3 nmol/g of protein; p=0.008). No differences were observed in lipid hydroperoxide levels (C = 0.4 +/- 0.2 nmol/mg of tissue, ETS = 0.1 +/- 0.1 nmol/mg of tissue; p=0.08).CONCLUSION: In animals exposed to tobacco smoke, oxidative stress is associated with the intensification of ventricular re-remodeling after myocardial infarction

Broadband optical ultrafast reflectivity of Si, Ge and GaAs

Ultrafast optical reflectivity measurements of silicon, germanium, and gallium arsenide have been carried out using an advanced set-up providing intense subpicosecond pulses (35 fs FWHM, λ = 400 nm) as a pump and broadband 340–780 nm ultrafast pulses as a white supercontinuum probe. Measurements have been performed for selected pump fluence conditions below the damage thresholds, that were carefully characterized. The obtained fluence damage thresholds are 30, 20.8, 9.6 mJ/cm 2 for Si, Ge and GaAs respectively. Ultrafast reflectivity patterns show clear differences in the Si, Ge, and GaAs trends both for the wavelength and time dependences. Important changes were observed near the wavelength regions corresponding to the E1, E1+ Δ singularities in the joint density of states, so related to the peculiar band structure of the three systems. For Ge, ultrafast reflectivity spectra were also collected at low temperature (down to 80 K) showing a shift of the characteristic doublet peak around 2.23 eV and a reduction of the recovery times

Sodium-glucose co-transporter2 expression and inflammatory activity in diabetic atherosclerotic plaques: Effects of sodium-glucose co-transporter2 inhibitor treatment

Objective: We evaluated sodium-glucose co-transporter2 (SGLT2) expression and the effect of SGLT2 inhibitor (SGLT2i) therapies on carotid plaques of asymptomatic diabetic and non-diabetic patients. Methods: Plaques were obtained from 296 non-diabetic patients and 227 patients with type 2 diabetes undergoing carotid endarterectomy. 97 patients with type 2 diabetes were treated with SGLT2 inhibitors for 16 +/- 4 months before endarterectomy. After propensity score matching analysis, patients with type 2 diabetes were categorized without (n = 87) and with SGLT2i therapy (n = 87). To investigate SGLT2 expression levels' effects on major adverse endpoints (MACE = stroke, transient ischemic attack, myocardial infarction, and death), we evaluated MACE outcomes at a 2-year follow-up. Results: Compared to plaques from patients without diabetes, plaques from patients with diabetes had higher SGLT2 expression, inflammation, and oxidative stress, along with lower SIRT6 expression and collagen content. Compared with plaques from patients with diabetes, SGLT2itreated patients with type 2 diabetes presented increased SIRT6 expression and collagen content and lowered inflammation and ion and oxidative stress, thus indicating a more stable plaque phenotype. These results supported in vitro observations on human aorta endothelial cells (EC) (TeloHAEC-cells). Indeed, EC treated with high glucose (25 mM) in the presence of SGLT2i (100 nM canagliflozin) presented higher SIRT6 expression and decreased mRNA and protein SGLT2 levels, nuclear factor-kappa B (NF-B(NF - KB), and matrix metallopeptidase 9 (MMP-9) expression compared to cells treated only with high glucose. After two years following endarterectomy, a multivariable Cox regression analysis showed significantly higher 2-year overall survival from MACE in patients without diabetes (P < 0.01). Among patient with diabetes, the current SGLT2i users presented a significantly lower rate of MACE through 2 years compared to non-SGLT2i users (P < 0.05). Conclusions: These findings unveil a critical involvement of the SGLT2/SIRT6 pathway in the inflammatory process of diabetic atherosclerotic lesions and suggest its possible favorable modulation by SGLT2i. (c) 2021 The Authors. Published by Elsevier GmbH. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

A Possible Outbreak by Serratia Marcescens: Genetic Relatedness between Clinical and Environmental Strains

Serratia marcescens (SM) is a Gram-negative bacterium that is frequently found in the environment. Since 1913, when its pathogenicity was first demonstrated, the number of infections caused by SM has increased. There is ample evidence that SM causes nosocomial infections in immunocompromised or critically ill patients admitted to the intensive care units (ICUs), but also in newborns admitted to neonatal ICUs (NICUs). In this study, we evaluated the possible genetic correlation by PFGE between clinical and environmental SM strains from NICU and ICU and compared the genetic profile of clinical strains with strains isolated from patients admitted to other wards of the same hospital. We found distinct clonally related groups of SM strains circulating among different wards of a large university hospital. In particular, the clonal relationship between clinical and environmental strains in NICU and ICU 1 was highlighted. The identification of clonal relationships between clinical and environmental strains in the wards allowed identification of the epidemic and rapid implementation of adequate measures to stop the spread of SM

SARS-COV-2 colonizes coronary thrombus and impairs heart microcirculation bed in asymptomatic SARS-CoV-2 positive subjects with acute myocardial infarction

Background: The viral load of asymptomatic SAR-COV-2 positive (ASAP) persons has been equal to that of symptomatic patients. On the other hand, there are no reports of ST-elevation myocardial infarction (STEMI) outcomes in ASAP patients. Therefore, we evaluated thrombus burden and thrombus viral load and their impact on microvascular bed perfusion in the infarct area (myocardial blush grade, MBG) in ASAP compared to SARS-COV-2 negative (SANE) STEMI patients. Methods: This was an observational study of 46 ASAP, and 130 SANE patients admitted with confirmed STEMI treated with primary percutaneous coronary intervention and thrombus aspiration. The primary endpoints were thrombus dimension + thrombus viral load effects on MBG after PPCI. The secondary endpoints during hospitalization were major adverse cardiovascular events (MACEs). MACEs are defined as a composite of cardiovascular death, nonfatal acute AMI, and heart failure during hospitalization. Results: In the study population, ASAP vs. SANE showed a significant greater use of GP IIb/IIIa inhibitors and of heparin (p < 0.05), and a higher thrombus grade 5 and thrombus dimensions (p < 0.05). Interestingly, ASAP vs. SANE patients had lower MBG and left ventricular function (p < 0.001), and 39 (84.9%) of ASAP patients had thrombus specimens positive for SARS-COV-2. After PPCI, a MBG 2–3 was present in only 26.1% of ASAP vs. 97.7% of SANE STEMI patients (p < 0.001). Notably, death and nonfatal AMI were higher in ASAP vs. SANE patients (p < 0.05). Finally, in ASAP STEMI patients the thrombus viral load was a significant determinant of thrombus dimension independently of risk factors (p < 0.005). Thus, multiple logistic regression analyses evidenced that thrombus SARS-CoV-2 infection and dimension were significant predictors of poorer MBG in STEMI patients. Intriguingly, in ASAP patients the female vs. male had higher thrombus viral load (15.53 ± 4.5 vs. 30.25 ± 5.51 CT; p < 0.001), and thrombus dimension (4.62 ± 0.44 vs 4.00 ± 1.28 mm2; p < 0.001). ASAP vs. SANE patients had a significantly lower in-hospital survival for MACE following PPCI (p < 0.001). Conclusions: In ASAP patients presenting with STEMI, there is strong evidence towards higher thrombus viral load, dimension, and poorer MBG. These data support the need to reconsider ASAP status as a risk factor that may worsen STEMI outcomes

Structural phase stability and homogeneity enhancement of electrochemically synthesized Mn2V2O7 by nanocarbon networks

Structural phase stability and homogeneity of the electrochemically synthesized Mn2V2O7 (MVO) on nanocarbon network structures are investigated. The cup-stacked multi-walled carbon nanotubes (CNTs) and electrolytic graphene oxide (eGO) are the networks exploited in present work. It is shown that co-electrodeposition of carbonaceous network and V2O5.nH2O followed by electro-insertion of Mn2+ cations results in the formation of intermixed β-Mn2V2O7 nano-structures. The morphology and surface chemistry of the synthesized nano-structures is studied via high-resolution electron transmission and scanning X-ray photo-emission microscopies as well as Raman spectroscopy. The synthesized MVO on carbon fiber surface in the absence of the nanocarbon network shows a non-uniform phase formation and uneven coating distribution. The nanocarbon networks assisted MVO demonstrate uniform phase formation and distribution. The dominant MVO structural phase product present in these samples differs with different type of carbonaceous networks. The possible effect of the catalytic activity of the carbonaceous network as well as their hydrophilicity on the final structural and phase formation is discussed. The present study establishes new possibilities on catalytic assisted metal alloy oxide deposition for advanced applications