Ellipsograph for pantograph Patent

Ellipsograph for describing and cutting ellipses with minimal axial dimension

Evaluation of a series hybrid thrust bearing at DN values to three million. 2: Fabrication and testing

Results of tests made to determine the experimental performance of a series hybrid bearing are reported. The bearing consists of a 150 mm ball bearing and a centrifugally actuated, conical, fluid film bearing fitting an envelope with an outer radius of 86.4 mm (3.4 in.) and inner radius of 71 mm (2.8 in.). Tests were conducted up to 16,500 rpm, at which speed an axial load of 15,568 N (3500 lb) was safely supported by the hybrid bearing system. Through the employment of the series hybrid bearing principle, it was possible to reduce the effective ball bearing speed to approximately one-half of the shaft speed. A reduction of this magnitude should result in a tenfold increase in the ball bearing fatigue life. A successful simulation of fluid film bearing lubricant supply failure, performed repeatedly at an operating speed of 10,000 rpm, resulted in complete and smooth change over to full scale ball bearing operation when the oil supply to the fluid film bearing was discontinued. Reactivation of the fluid film supply system produced a flawless return to the original mode of hybrid operation

Cyber Buddy is Better than No Buddy: A Test of the Köhler Motivation Effect in Exergames.

Objective: Although exergames are popular, few people take advantage of the potential of group dynamics to motivate play (and achieve associated health bene?ts). One motivation gain phenomenon has shown promise for motivating greater effort in partnered exergames: The Koehler effect (working at a task with a more capable partner where one’s performance is indispensable to the group). This article examines whether a Koehler effect can be demonstrated in an exergame by exercising with a moderately superior humanoid, software-generated partner. Materials and Methods: Male and female (n = 120; mean age, 19.41 years) college students completed a series of plank exercises using ‘‘CyBuddy Exercise,’’ a program developed speci?cally for this study. In a lab in an academic building, participants completed the exercises individually and, after a rest, were randomly assigned to complete the same exercises again, but with a ‘‘live’’ human partner (HP) presented virtually, a nearlyhuman-like, humanoid partner (NHP), a hardly human-like, software-generated partner (HHP), or a no-partner control condition (IC), with equal numbers in each group (i.e., n = 30). Exercise persistence, perceived exertion, self-ef?cacy beliefs, enjoyment, and intentions to exercise were recorded and analyzed. Results: A 4X2 analysis of variance on the (Block 2 – Block 1) difference scores showed that a signi?cant Koehler motivation gain was observed in all partner conditions (compared with IC), but persistence was signi?cantly greater with HPs than with either NHP or HHP humanoid partners (P < 0.05). By the conclusion of the study, there were no signi?cant differences among the partnered conditions in perceived exertion, self-ef?cacy, enjoyment, or future intentions to exercise. Conclusions: These results suggest that a software-generated partner can elicit the Koehler motivation gain in exergames, but not as strongly as a partner who is thought to be human

Evaluation of a series hybird thrust bearing at DN values to three million. 1: Analysis and design

The analysis and design are presented of a hybrid bearing consisting of a 150-mm ball bearing and a centrifugally actuated, conical, fluid film bearing fitting an envelope with an outer radius of 86.4 mm (3.4 in.) and an inner radius of 71 mm (2.8 in.). The bearing analysis, combined with available torque data on ball bearings, indicates that an effective speed split between the ball and fluid-film bearings of 50 percent may be expected during operation at 20,000 rpm and under an axial load of 17,800 newtons (4000 lbs.). This speed split can result in a ten-fold increase in the life of the ball bearing when compared to a simple ball bearing system operating under similar conditions

Design and evaluation of a 3 million DN series-hybrid thrust bearing

The bearing, consisting of a 150-mm ball bearing and a centrifugally actuated, conical, fluid-film bearing, was fatigue tested. Test conditions were representative of a mainshaft ball bearing in a gas turbine engine operating at maximum thrust load to simulate aircraft takeoff conditions. Tests were conducted up to 16000 rpm and at this speed an axial load of 15568 newtons (3500 lb) was safely supported by the hybrid bearing system. Through the series-hybrid bearing principle, the effective ball bearing speed was reduced to approximately one-half of the shaft speed. It was concluded that a speed reduction of this magnitude results in a ten-fold increase in the ball bearing fatigue life. A successful evaluation of fluid-film bearing lubricant supply failure was performed repeatedly at an operating speed of 10,000 rpm. A complete and smooth changeover to full-scale ball bearing operation was effected when the oil supply to the fluid-film bearing was cut off. Reactivation of the fluid-film oil supply system resulted in a flawless return to the original mode of hybrid operation

Small, high-speed bearing technology for cryogenic turbo-pumps

The design of 20-mm bore ball bearings is described for cryogenic turbo-machinery applications, operating up to speeds of 120,000 rpm. A special section is included on the design of hybrid bearings. Each hybrid bearing is composed of a ball bearing in series with a conventional pressurized fluid-film journal bearing. Full details are presented on the design of a test vehicle which possesses the capability of testing the above named bearings within the given speed range under externally applied radial and axial loads

HATS-1b: The First Transiting Planet Discovered by the HATSouth Survey

We report the discovery of HATS-1b, a transiting extrasolar planet orbiting the moderately bright V=12.05 G dwarf star GSC 6652-00186, and the first planet discovered by HATSouth, a global network of autonomous wide-field telescopes. HATS-1b has a period P~3.4465 d, mass Mp~1.86MJ, and radius Rp~1.30RJ. The host star has a mass of 0.99Msun, and radius of 1.04Rsun. The discovery light curve of HATS-1b has near continuous coverage over several multi-day periods, demonstrating the power of using a global network of telescopes to discover transiting planets.Comment: Submitted to AJ 10 pages, 5 figures, 6 table

Twenty-One New Light Curves of OGLE-TR-56b: New System Parameters and Limits on Timing Variations

Although OGLE-TR-56b was the second transiting exoplanet discovered, only one light curve, observed in 2006, has been published besides the discovery data. We present twenty-one light curves of nineteen different transits observed between July 2003 and July 2009 with the Magellan Telescopes and Gemini South. The combined analysis of the new light curves confirms a slightly inflated planetary radius relative to model predictions, with R_p = 1.378 +/- 0.090 R_J. However, the values found for the transit duration, semimajor axis, and inclination values differ significantly from the previous result, likely due to systematic errors. The new semimajor axis and inclination, a = 0.01942 +/- 0.00015 AU and i = 73.72 +/- 0.18 degrees, are smaller than previously reported, while the total duration, T_14 = 7931 +/- 38 s, is 18 minutes longer. The transit midtimes have errors from 23 s to several minutes, and no evidence is seen for transit midtime or duration variations. Similarly, no change is seen in the orbital period, implying a nominal stellar tidal decay factor of Q_* = 10^7, with a three-sigma lower limit of 10^5.7.Comment: 14 pages, 5 figures, accepted to Ap