An Inverse Geometry Problem for the Localization of Skin Tumours by Thermal Analysis

In this paper, the Dual Reciprocity Method (DRM) is coupled to a Genetic Algorithm (GA) in an inverse procedure through which the size and location of a skin tumour may be obtained from temperature measurements at the skin surface. The GA is an evolutionary process which does not require the calculation of sensitivities, search directions or the definition of initial guesses. The DRM in this case requires no internal nodes. It is also shown that the DRM approximation function used is not an important factor for the problem considered here. Results are presented for tumours of different sizes and positions in relation to the skin surface

Numerical analysis of the hydrodynamic behaviour of immiscible metallic alloys in twin-screw rheomixing process

A numerical analysis by a VOF method is presented for studying the hydrodynamic mechanisms of the rheomixing process by a twin-screw extruder (TSE). The simplified flow field is established based on a systematic analysis of flow features of immiscible alloys in TSE rheomixing process. The studies focus on the fundamental microstructure mechanisms of rheological behaviour in shear-induced turbulent flows. It is noted that the microstructure of immiscible alloys in the mixing process is strongly influenced by the interaction between droplets, which is controlled by shearing forces, viscosity ratio, turbulence, and shearing time. The numerical results show a good qualitative agreement with the experimental results, and are useful for further optimisation design of prototypical rheomixing processes

Designing sustainable medical devices

Stakeholders in the medical device manufacturing industry are becoming more concerned about the environmental impact of their products and processes. The consumers are also becoming more aware of the negative impact that manufacturers can have on the environment. Government initiatives continue to increase environmental awareness through the development of new policy and legislation, encouraging industry to become more accountable for the environmental impact of their products and operations. The ISO 14001 standard, Environmental Management Systems-Requirements with Guidance for Use, sets guidelines to enable businesses to recognize the environmental effects of their products and processes. Departments can use the tool to set targets to lower the environmental impact and identify areas of high environmental concern when designing, purchasing, and marketing products. Research in these areas will be used to develop the environmental scoring tool to aid in the design of future sustainable medical devices

Hydrodynamic Analysis of Binary Immiscible Metallurgical Flow in a Novel Mixing Process: Rheomixing

This paper presents a hydrodynamic analysis of binary immiscible metallurgical flow by a numerical simulation of the rheomixing process. The concept of multi-controll is proposed for classifying complex processes and identifying individual processes in an immiscible alloy system in order to perform simulations. A brief review of fabrication methods for immiscible alloys is given, and fluid flow aspects of a novel fabrication method – rheomixing by twin-screw extruder (TSE) are analysed. Fundamental hydrodynamic micro-mechanisms in a TSE are simulated by a piecewise linear (PLIC) volume-of-fluid (VOF) method coupled with the continuum surface force (CFS) algorithm. This revealed that continuous reorientation in the TSE process could produce fine droplets and the best mixing efficiency. It is verified that TSE is a better mixing device than single screw extruder (SSE) and can achieve finer droplets. Numerical results show good qualitative agreement with experimental results. It is concluded that rheomixing by a TSE can be successfully employed for casting immiscible engineering alloys due to its unique characteristics of reorientation and surface renewal

A coupled dual reciprocity BEM/Genetic algorithm for identification of blood perfusion parameters

The paper presents an inverse analysis procedure based on a coupled numerical formulation through which the coefficients describing non-linear thermal properties of blood perfusion may be identified. The numerical technique involves a combination of the Dual Reciprocity Boundary Element Method and a Genetic Algorithm for the solution of the Pennes bioheat equation. Both linear and quadratic temperature-dependent variations are considered for the blood perfusion

Multi-focal laser surgery: cutting enhancement by hydrodynamic interactions between cavitation bubbles

Transparent biological tissues can be precisely dissected with ultrafast lasers using optical breakdown in the tight focal zone. Typically, tissues are cut by sequential application of pulses, each of which produces a single cavitation bubble. We investigate the hydrodynamic interactions between simultaneous cavitation bubbles originating from multiple laser foci. Simultaneous expansion and collapse of cavitation bubbles can enhance the cutting efficiency by increasing the resulting deformations in tissue, and the associated rupture zone. An analytical model of the flow induced by the bubbles is presented and experimentally verified. The threshold strain of the material rupture is measured in a model tissue. Using the computational model and the experimental value of the threshold strain one can compute the shape of the rupture zone in tissue resulting from application of multiple bubbles. With the threshold strain of 0.7 two simultaneous bubbles produce a continuous cut when applied at the distance 1.35 times greater than that required in sequential approach. Simultaneous focusing of the laser in multiple spots along the line of intended cut can extend this ratio to 1.7. Counter-propagating jets forming during collapse of two bubbles in materials with low viscosity can further extend the cutting zone - up to a factor of 1.54.Comment: 16 pages, 8 figures. Paper is accepted for publication in Physical Review

Modified Green's Functions for Shallow Water Acoustic Wave Propagation

This article presents an assessment of alternative forms of the Green’s function for boundary element simulations of acoustic wave propagation in shallow water. It is assumed that the problem is two-dimensional, the source of acoustic disturbance is time-harmonic, the velocity of sound is constant and the medium in the absence of perturbations is quiescent. Efficient implementations of the boundary element method for underwater acoustics should employ Green's functions which directly satisfy the boundary conditions on the free surface and the horizontal parts of the bottom boundary. In the present work, these Green's functions are constructed by using different techniques, namely the method of images, eigenfunction expansions and the Ewald’s method

Heat and mass transfer under an infant radiant warmer – Development of a numerical model

This is the post-print version of the final paper published in Medical Engineering & Physics. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2010 Elsevier B.V.The main objectives of this paper are to present a procedure of how to create and set up a model for the physical processes that take place within an infant radiant warmer and to validate that Computational Fluid Dynamics (CFD) can be used to resolve such problems. In this study, the results are obtained for a simplified model, both in terms of the geometry employed and the prescribed boundary conditions. The results were numerically verified in terms of the convergence history, monitor data and the physical correctness. This study shows that the physical situation is unsteady and the results tend to oscillate, almost periodically, around a mean value. The results presented in the paper are found to be in qualitative agreement with the experimental data. This gives us confidence that the techniques employed in this paper are appropriate and form the starting point for the inclusion of more realistic effects, e.g. real shape of the newborn and radiant lamp, heat generated inside the newborn, moisture transport, etc.European Union Marie Curie Fellowship programm

Critical Percolation Phase and Thermal BKT Transition in a Scale-Free Network with Short-Range and Long-Range Random Bonds

Percolation in a scale-free hierarchical network is solved exactly by renormalization-group theory, in terms of the different probabilities of short-range and long-range bonds. A phase of critical percolation, with algebraic (Berezinskii-Kosterlitz-Thouless) geometric order, occurs in the phase diagram, in addition to the ordinary (compact) percolating phase and the non-percolating phase. It is found that no connection exists between, on the one hand, the onset of this geometric BKT behavior and, on the other hand, the onsets of the highly clustered small-world character of the network and of the thermal BKT transition of the Ising model on this network. Nevertheless, both geometric and thermal BKT behaviors have inverted characters, occurring where disorder is expected, namely at low bond probability and high temperature, respectively. This may be a general property of long-range networks.Comment: Added explanations and data. Published version. 4pages, 4 figure