Numerical analysis of the hydrodynamic behaviour of immiscible metallic alloys in twin-screw rheomixing process

A numerical analysis by a VOF method is presented for studying the hydrodynamic mechanisms of the rheomixing process by a twin-screw extruder (TSE). The simplified flow field is established based on a systematic analysis of flow features of immiscible alloys in TSE rheomixing process. The studies focus on the fundamental microstructure mechanisms of rheological behaviour in shear-induced turbulent flows. It is noted that the microstructure of immiscible alloys in the mixing process is strongly influenced by the interaction between droplets, which is controlled by shearing forces, viscosity ratio, turbulence, and shearing time. The numerical results show a good qualitative agreement with the experimental results, and are useful for further optimisation design of prototypical rheomixing processes

Origin of the roughness exponent in elastic strings at the depinning threshold

Within a recently developed framework of dynamical Monte Carlo algorithms, we compute the roughness exponent $\zeta$ of driven elastic strings at the depinning threshold in 1+1 dimensions for different functional forms of the (short-range) elastic energy. A purely harmonic elastic energy leads to an unphysical value for $\zeta$. We include supplementary terms in the elastic energy of at least quartic order in the local extension. We then find a roughness exponent of $\zeta \simeq 0.63$, which coincides with the one obtained for different cellular automaton models of directed percolation depinning. The quartic term translates into a nonlinear piece which changes the roughness exponent in the corresponding continuum equation of motion. We discuss the implications of our analysis for higher-dimensional elastic manifolds in disordered media.Comment: 4 pages, 2 figure

Magnetotransport and magnetocrystalline anisotropy in Ga1-xMnxAs epilayers

We present an analysis of the magnetic anisotropy in epitaxial Ga1-xMnxAs thin films through electrical transport measurements on multiterminal microdevices. The film magnetization is manipulated in 3D space by a three-axis vector magnet. Anomalous switching patterns are observed in both longitudinal and transverse resistance data. In transverse geometry in particular we observe strong interplay between the anomalous Hall effect and the giant planar Hall effect. This allows direct electrical characterization of magnetic transitions in the 3D space. These transitions reflect a competition between cubic magnetic anisotropy and an effective out-of-plane uniaxial anisotropy, with a reversal mechanism that is distinct from the in-plane magnetization. The uniaxial anisotropy field is directly calculated with high precision and compared with theoretical predictions

Optical properties of Si/Si0.87Ge0.13 multiple quantum well wires

Nanometer-scale wires cut into a Si/Si0.87Ge0.13 multiple quantum well structure were fabricated and characterized by using photoluminescence and photoreflectance at temperatures between 4 and 20 K. It was found that, in addition to a low-energy broadband emission at around 0.8 eV and other features normally observable in photoluminescence measurements, fabrication process induced strain relaxation and enhanced electron-hole droplets emission together with a new feature at 1.131 eV at 4 K were observed. The latter was further identified as a transition related to impurities located at the Si/Si0.87Ge0.13 heterointerfaces

Hydrodynamic Analysis of Binary Immiscible Metallurgical Flow in a Novel Mixing Process: Rheomixing

This paper presents a hydrodynamic analysis of binary immiscible metallurgical flow by a numerical simulation of the rheomixing process. The concept of multi-controll is proposed for classifying complex processes and identifying individual processes in an immiscible alloy system in order to perform simulations. A brief review of fabrication methods for immiscible alloys is given, and fluid flow aspects of a novel fabrication method – rheomixing by twin-screw extruder (TSE) are analysed. Fundamental hydrodynamic micro-mechanisms in a TSE are simulated by a piecewise linear (PLIC) volume-of-fluid (VOF) method coupled with the continuum surface force (CFS) algorithm. This revealed that continuous reorientation in the TSE process could produce fine droplets and the best mixing efficiency. It is verified that TSE is a better mixing device than single screw extruder (SSE) and can achieve finer droplets. Numerical results show good qualitative agreement with experimental results. It is concluded that rheomixing by a TSE can be successfully employed for casting immiscible engineering alloys due to its unique characteristics of reorientation and surface renewal

A new model for the double well potential

A new model for the double well potential is presented in the paper. In the new potential, the exchanging rate could be easily calculated by the perturbation method in supersymmetric quantum mechanics. It gives good results whether the barrier is high or sallow. The new model have many merits and may be used in the double well problem.Comment: 3pages, 3figure

Queue Dynamics With Window Flow Control

This paper develops a new model that describes the queueing process of a communication network when data sources use window flow control. The model takes into account the burstiness in sub-round-trip time (RTT) timescales and the instantaneous rate differences of a flow at different links. It is generic and independent of actual source flow control algorithms. Basic properties of the model and its relation to existing work are discussed. In particular, for a general network with multiple links, it is demonstrated that spatial interaction of oscillations allows queue instability to occur even when all flows have the same RTTs and maintain constant windows. The model is used to study the dynamics of delay-based congestion control algorithms. It is found that the ratios of RTTs are critical to the stability of such systems, and previously unknown modes of instability are identified. Packet-level simulations and testbed measurements are provided to verify the model and its predictions

Progress on pricing with peering

This paper examines a simple model of how a provider ISP charges customer ISPs by assuming the provider ISP wants to maximize its revenue when customer ISPs have the possibility of setting up peering connections. It is shown that finding the optimal pricing is NP-complete, and APX-complete. Customers can respond to price in many ways, including throttling traffic as well as peering. An algorithm is studied which obtains a 1/4 approximation for a wide range of customer responses