Anterograde trafficking of KCa3.1 in polarized epithelia is Rab1- And Rab8-Dependent and recycling endosome-independent

The intermediate conductance, Ca2+-activated K+ channel (KCa3.1) targets to the basolateral (BL) membrane in polarized epithelia where it plays a key role in transepithelial ion transport. However, there are no studies defining the anterograde and retrograde trafficking of KCa3.1 in polarized epithelia. Herein, we utilize Biotin Ligase Acceptor Peptide (BLAP)-tagged KCa3.1 to address these trafficking steps in polarized epithelia, using MDCK, Caco-2 and FRT cells. We demonstrate that KCa3.1 is exclusively targeted to the BL membrane in these cells when grown on filter supports. Following endocytosis, KCa3.1 degradation is prevented by inhibition of lysosomal/proteosomal pathways. Further, the ubiquitylation of KCa3.1 is increased following endocytosis from the BL membrane and PR-619, a deubiquitylase inhibitor, prevents degradation, indicating KCa3.1 is targeted for degradation by ubiquitylation. We demonstrate that KCa3.1 is targeted to the BL membrane in polarized LLC-PK1 cells which lack the m1B subunit of the AP-1 complex, indicating BL targeting of KCa3.1 is independent of μ1B. As Rabs 1, 2, 6 and 8 play roles in ER/Golgi exit and trafficking of proteins to the BL membrane, we evaluated the role of these Rabs in the trafficking of KCa3.1. In the presence of dominant negative Rab1 or Rab8, KCa3.1 cell surface expression was significantly reduced, whereas Rabs 2 and 6 had no effect. We also co-immunoprecipitated KCa3.1 with both Rab1 and Rab8. These results suggest these Rabs are necessary for the anterograde trafficking of KCa3.1. Finally, we determined whether KCa3.1 traffics directly to the BL membrane or through recycling endosomes in MDCK cells. For these studies, we used either recycling endosome ablation or dominant negative RME-1 constructs and determined that KCa3.1 is trafficked directly to the BL membrane rather than via recycling endosomes. These results are the first to describe the anterograde and retrograde trafficking of KCa3.1 in polarized epithelia cells. © 2014 Bertuccio et al

Assessing the Impact of Stakeholder Engagement in Management Strategy Evaluation

After completing a large, regional, multi-use Management Strategy Evaluation, we attempt to assess the impact of stakeholder engagement on the project. We do so by comparing the original project plan to the actual project development and highlight the changes which can be more directly related to stakeholder engagement aided by the application of a logic model for program evaluation. The impact can be summarised into four broad classes: a) change in the actual project development; b) a measurable change in the network of interactions both stakeholders (which includes researchers); c) changes in how the computer model was developed and run; and d) changes in attitudes among stakeholders (including researchers). We discuss these changes, the way they have been detected and some lessons we learnt which may benefit future Management Strategy Evaluation projects

A multi-model approach to stakeholder engagement in complex environmental problems

We describe the different types of models we used as part of an effort to inform policy-making aiming at the management of the Ningaloo coast in the Gascoyne region, Western Australia. This provides an overview of how these models interact, the different roles they cover, how they fit into a full decision making process and what we learnt about the stakeholders involved in our project via their use. When modelling is explicitly used to address socio-ecological issues, the key determinant of success is whether the models, their results and recommendations are taken up by stakeholders; such uptake in turn depends on addressing stakeholders’ concerns, on engaging them in the project, on ensuring they feel ownership of the decision process at large, and that they understand and trust the modelling effort. This observation has guided our approach and has resulted in treating ‘building a model’ as the catalyst, rather than the final aim, of the process. In other words, extensive interactions in order to introduce, showcase, discuss and tune the model used for final decision making have represented both a requirement and an opportunity to ensure (i) model relevance, (ii) its acceptance, (iii) that all information available in the stakeholder team was accounted for and (iv) that stakeholders holding different levels of understanding of modelling, what it does and what it can provide to decision-making could develop an informed opinion on its use. To fulfil these roles we developed five broad classes of models: conceptual models, toy-models, singlesystem models, shuttle-models and a full-system model. In conceptual models the main drivers of a system are highlighted for subsequent representation as components of the full-system model. This usually results in a diagram summarising our understanding of how the system works. In toy-models a problem is simplified in such a way that only a handful of components are included. The purpose of these models is mostly educational: we want to understand how each component affects the problem and in order to achieve this, we temporarily renounce a satisfactory understanding of the overall problem. In single-system models we include a fairly detailed representation of a single component of the system (in our case recreational fishing and tourism); these models can be used to introduce stakeholders to modelling, provide temporary results from the study of a single activity, which will feed into the development of the final full-system model, or address sector-specific issues. In shuttle-models, we include the minimum number of processes we believe are crucial for a basic understanding of the overall problem. We know these models are still too simple for full system description, but they provide a sufficient understanding to enable us to contemplate, build and use the more complex models needed for full problem description. The term ‘shuttle’ refers to taking us from a minimum to a full description of the problem, a journey which is necessary both to developers in model definition and parameterisation and to stakeholders in the interpretation of the final full-system model results. Finally, the full-system model includes all information collected through the project and addresses all scenarios of stakeholders concern, and whose definition has been greatly eased by use of the ‘simpler’ models. As an example, a conceptual model may identify fishing and tourism as the main drivers of a region; a toymodel may describe how catches affect fish stocks; a single-system model may include the effect of gear, regulations and other processes affecting recreational fishing; a shuttle-model may include a simplified representation of the interaction between fishing, tourism, and infrastructure development on the overall health of the local ecosystem; this will gradually ‘take’ us to comprehend the ‘full’ model which may include tourism pressure, fish market values, climate effect, larger food-webs, etc

Velocity-space sensitivity of the time-of-flight neutron spectrometer at JET

The velocity-space sensitivities of fast-ion diagnostics are often described by so-called weight functions. Recently, we formulated weight functions showing the velocity-space sensitivity of the often dominant beam-target part of neutron energy spectra. These weight functions for neutron emission spectrometry (NES) are independent of the particular NES diagnostic. Here we apply these NES weight functions to the time-of-flight spectrometer TOFOR at JET. By taking the instrumental response function of TOFOR into account, we calculate time-of-flight NES weight functions that enable us to directly determine the velocity-space sensitivity of a given part of a measured time-of-flight spectrum from TOFOR

On the mechanisms governing gas penetration into a tokamak plasma during a massive gas injection

A new 1D radial fluid code, IMAGINE, is used to simulate the penetration of gas into a tokamak plasma during a massive gas injection (MGI). The main result is that the gas is in general strongly braked as it reaches the plasma, due to mechanisms related to charge exchange and (to a smaller extent) recombination. As a result, only a fraction of the gas penetrates into the plasma. Also, a shock wave is created in the gas which propagates away from the plasma, braking and compressing the incoming gas. Simulation results are quantitatively consistent, at least in terms of orders of magnitude, with experimental data for a D 2 MGI into a JET Ohmic plasma. Simulations of MGI into the background plasma surrounding a runaway electron beam show that if the background electron density is too high, the gas may not penetrate, suggesting a possible explanation for the recent results of Reux et al in JET (2015 Nucl. Fusion 55 093013)

The relationship between educational level and bone mineral density in postmenopausal women

BACKGROUND: This study describes the influence of educational level on bone mineral density (BMD) and investigating the relationship between educational level and bone mineral density in postmenopausal women. METHODS: A total of 569 postmenopausal women, from 45 to 86 years of age (mean age of 60.43 ± 7.19 years) were included in this study. A standardized interview was used at the follow-up visit to obtain information on demographic, life-style, reproductive and menstrual histories such as age at menarche, age at menopause, number of pregnancies, number of abortions, duration of menopause, duration of fertility, and duration of lactation. Patients were separated into four groups according to the level of education, namely no education (Group 1 with 209 patients), elementary (Group 2 with 222 patients), high school (Group 3 with 79 patients), and university (Group 4 with 59 patients). RESULTS: The mean ages of groups were 59.75 ± 7.29, 61.42 ± 7.50, 60.23 ± 7.49, and 58.72 ± 7.46, respectively. Spine BMD was significant lower in Group 1 than that of other groups (p < 0.05). Trochanter and ward's triangle BMD were the highest in Group 4 and there was a significant difference between Group 1 and 4 (p < 0.05). The prevalence of osteoporosis showed an inverse relationship with level of education, ranging from 18.6% for the most educated to 34.4% for the no educated women (p < 0.05). Additionally, there was a significant correlation between educational level and spine BMD (r = 0.20, p < 0.01), trochanter BMD (r = 0.13, p < 0.01), and ward's BMD (r = 0.14, p < 0.01). CONCLUSIONS: The results of the study suggest that there is a significant correlation between educational level and BMD. Losses in BMD for women of lower educational level tend to be relatively high, and losses in spine and femur BMD showed a decrease with increasing educational level

Novel GLP-1 Fusion Chimera as Potent Long Acting GLP-1 Receptor Agonist

GLP-1 has a variety of anti-diabetic effects. However, native GLP-1 is not suitable for therapy of diabetes due to its short half-life (t1/2<2 min). To circumvent this, we developed a long-lasting GLP-1 receptor agonist by the fusion of GLP-1 with human IgG2 Fc (GLP-1/hIgG2). ELISA-based receptor binding assay demonstrated that GLP-1/hIgG2 had high binding affinity to the GLP-1R in INS-1 cells (Kd = 13.90±1.52 nM). Upon binding, GLP-1/hIgG2 was rapidly internalized by INS-1 cells in a dynamin-dependent manner. Insulin RIA showed that GLP-1/IgG2 dose-dependently stimulated insulin secretion from INS-1 cells. Pharmacokinetic studies in CD1 mice showed that with intraperitoneal injection (i.p.), the GLP-1/hIgG2 peaked at 30 minutes in circulation and maintained a plateau for >168 h. Intraperitoneal glucose tolerance test (IPGTT) in mice showed that GLP-1/hIgG2 significantly decreased glucose excursion. Furthermore, IPGTT performed on mice one week after a single drug-injection also displayed significantly reduced glucose excursion, indicating that GLP-1/hIgG2 fusion protein has long-lasting effects on the modulation of glucose homeostasis. GLP-1/hIgG2 was found to be effective in reducing the incidence of diabetes in multiple-low-dose streptozotocin-induced type 1 diabetes in mice. Together, the long-lasting bioactive GLP-1/hIgG2 retains native GLP-1 activities and thus may serve as a potent GLP-1 receptor agonist

Crowding Alone Cannot Account for Cosolute Effect on Amyloid Aggregation

Amyloid fiber formation is a specific form of protein aggregation, often resulting from the misfolding of native proteins. Aimed at modeling the crowded environment of the cell, recent experiments showed a reduction in fibrillation halftimes for amyloid-forming peptides in the presence of cosolutes that are preferentially excluded from proteins and peptides. The effect of excluded cosolutes has previously been attributed to the large volume excluded by such inert cellular solutes, sometimes termed “macromolecular crowding”. Here, we studied a model peptide that can fold to a stable monomeric β-hairpin conformation, but under certain solution conditions aggregates in the form of amyloid fibrils. Using Circular Dichroism spectroscopy (CD), we found that, in the presence of polyols and polyethylene glycols acting as excluded cosolutes, the monomeric β-hairpin conformation was stabilized with respect to the unfolded state. Stabilization free energy was linear with cosolute concentration, and grew with molecular volume, as would also be predicted by crowding models. After initiating the aggregation process with a pH jump, fibrillation in the presence and absence of cosolutes was followed by ThT fluorescence, transmission electron microscopy, and CD spectroscopy. Polyols (glycerol and sorbitol) increased the lag time for fibril formation and elevated the amount of aggregated peptide at equilibrium, in a cosolute size and concentration dependent manner. However, fibrillation rates remained almost unaffected by a wide range of molecular weights of soluble polyethylene glycols. Our results highlight the importance of other forces beyond the excluded volume interactions responsible for crowding that may contribute to the cosolute effects acting on amyloid formation

Benefits for Dominant Red Deer Hinds under a Competitive Feeding System: Food Access Behavior, Diet and Nutrient Selection

Social dominance is widely known to facilitate access to food resources in many animal species such as deer. However, research has paid little attention to dominance in ad libitum access to food because it was thought not to result in any benefit for dominant individuals. In this study we assessed if, even under ad libitum conditions, social rank may allow dominant hinds to consume the preferred components of food. Forty-four red deer hinds (Cervus elaphus) were allowed to consume ad libitum meal consisting of pellets of sunflower, lucerne and orange, and seeds of cereals, corn, cotton, and carob tree. The meal was placed only in one feeder, which reduced accessibility to a few individuals simultaneously. During seven days, feeding behavior (order of access, time to first feeding bout, total time spent feeding, and time per feeding bout) were assessed during the first hour. The relative abundance of each meal component was assessed at times 0, 1 and 5 h, as well as its nutritional composition. Social rank was positively related to the amount of time spent feeding during the 1st h (P = 0.048). Selection indices were positively correlated with energy (P = 0.018 during the 1st h and P = 0.047 from 1st to 5th) and fat (only during the 1st h; P = 0.036), but also negatively with certain minerals. Thus, dominant hinds could select high energy meal components for longer time under an ad libitum but restricted food access setting. Selection indices showed a higher selectivity when food availability was higher (1st hour respect to 1st to 5th). Finally, high and low ranking hinds had longer time per feeding bout than mid ones (P = 0.011), suggesting complex behavioral feeding tactics of low ranking social ungulates