Effect of combining a DC bias current with an AC transport current on AC losses in a High Temperature Superconductor

Creating complex flux configurations by superposing a dc current or magnetic field onto the ac current in a type II superconducting tape should lead to a variety of peculiar behaviors. An example is the appearance of the Clem valley, a minimum in the ac losses as a function of the dc bias amplitude, which has been theoretically studied by LeBlanc et al., in the continuation of Clem's calculations. These situations have been investigated by applying a dc current to a silver-gold sheathed Bi-2223 tape at 77 K (critical current 29 A), in addition to the usual ac transport current. The ac losses were measured by the null calorimetric method to ensure that the total losses were being accounted for. These were recorded for different values of the ac and dc currents, leading to the observation of two different behaviors depending on the ac current. Our revelation of the Clem valley is, to our knowledge, the first experimental validation of this phenomenon in high temperature superconductors, and may provide a simple way of reducing the ac loss in industrial applications of these materials.Comment: 4 pages,4 figures - ASC 9

Thermo-responsive nanofibrous composite membranes for efficient self-cleaning of protein foulants

This study developed a self-clean thermo-responsive nanofibrous poly(vinylidene fluoride) (PVDF)/nylon-6,6/poly(N-isopropylacrylamide) (PNIPAAm) composite ultrafiltration membrane consisting of a nylon-6,6/PNIPAAm functional nanofibre layer integrated into a PVDF substrate. The morphological analysis showed the presence of electrospun nano-nets branching out from the main nanofibres as PNIPAAm concentration increased, affecting the pore size distribution and solute rejection. The PVDF/nylon-6,6/PNIPAAm membranes showed improved surface hydrophilicity below the low critical solution temperature (LCST) and strong thermo-switchability. With bovine serum albumin (BSA) as the model foulant, the rejection of the 4 wt% PNIPAAm membranes was greatly improved to above 96%. Through a two-cycle ultrafiltration study using feed solution containing BSA and CaCl2, the membrane with 4 wt% PNIPAAm showed superior recovery of water permeance up to 97% assisted with temperature-change cleaning, compared to the control membrane that only recovered 56%. Filtration experiments with and without intermediate temperature-change cleaning proved that the anti-fouling mechanism of the PNIPAAm membranes was strongly associated with surface wettability and rapid conformation of PNIPAAm polymer chains induced by volume-phase transition, resulting in reduced protein adsorption and ‘shaking-off’ of the absorbed proteins from the membrane surface. Such smart responsive membranes have great potential for the development of easy-to-clean membranes for food and wastewater treatment.This study developed a self-clean thermo-responsive nanofibrous poly(vinylidene fluoride) (PVDF)/nylon-6,6/poly(N-isopropylacrylamide) (PNIPAAm) composite ultrafiltration membrane consisting of a nylon-6,6/PNIPAAm functional nanofibre layer integrated into a PVDF substrate. The morphological analysis showed the presence of electrospun nano-nets branching out from the main nanofibres as PNIPAAm concentration increased, affecting the pore size distribution and solute rejection. The PVDF/nylon-6,6/PNIPAAm membranes showed improved surface hydrophilicity below the low critical solution temperature (LCST) and strong thermo-switchability. With bovine serum albumin (BSA) as the model foulant, the rejection of the 4 wt% PNIPAAm membranes was greatly improved to above 96%. Through a two-cycle ultrafiltration study using feed solution containing BSA and CaCl2, the membrane with 4 wt% PNIPAAm showed superior recovery of water permeance up to 97% assisted with temperature-change cleaning, compared to the control membrane that only recovered 56%. Filtration experiments with and without intermediate temperature-change cleaning proved that the anti-fouling mechanism of the PNIPAAm membranes was strongly associated with surface wettability and rapid conformation of PNIPAAm polymer chains induced by volume-phase transition, resulting in reduced protein adsorption and ‘shaking-off’ of the absorbed proteins from the membrane surface. Such smart responsive membranes have great potential for the development of easy-to-clean membranes for food and wastewater treatment.status: publishe

Short review on porous metal membranes—Fabrication, commercial products, and applications

© 2018 by the authors. Licensee MDPI, Basel, Switzerland. Porous metal membranes have recently received increasing attention, and significant progress has been made in their preparation and characterisation. This progress has stimulated research in their applications in a number of key industries including wastewater treatment, dairy processing, wineries, and biofuel purification. This review examines recent significant progress in porous metal membranes including novel fabrication concepts and applications that have been reported in open literature or obtained in our laboratories. The advantages and disadvantages of the different membrane fabrication methods were presented in light of improving the properties of current membrane materials for targeted applications. Sintering of particles is one of the main approaches that has been used for the fabrication of commercial porous metal membranes, and it has great advantages for the fabrication of hollow fibre metal membranes. However, sintering processes usually result in large pores (e.g., >1 µm). So far, porous metal membranes have been mainly used for the filtration of liquids to remove the solid particles. For porous metal membranes to be more widely used across a number of separation applications, particularly for water applications, further work needs to focus on the development of smaller pore (e.g., sub-micron) metal membranes and the significant reduction of capital and maintenance costs

Silver metal nano-matrixes as high efficiency and versatile catalytic reactors for environmental remediation

Nano-porous metallic matrixes (NMMs) offer superior surface to volume ratios as well as enhanced optical, photonic, and electronic properties to bulk metallic materials. Such behaviours are correlated to the nano-scale inter-grain metal domains that favour the presence of electronic vacancies. In this work, continuous 3D NMMs were synthesized for the first time through a simple diffusion-reduction process whereby the aerogel matrix was functionalized with (3-Mercaptopropyl)trimethoxysilane. The surface energy of the silica monolith templates was tuned to improve the homogeneity of the reduction process while thiol functionalization facilitated the formation of a high density of seeding points for metal ions to reduce. The diameter of NMMs was between 2 and 1000 nm, corresponding to a silver loading between 1.23 and 41.16 at.%. A rates of catalytic degradation kinetics of these NMMS which is three orders of magnitude higher than those of the non-functionalized silver-silica structures. Furthermore, the enhancement in mechanical stability at nanoscale which was evaluated by Atomic Force Microscopy force measurements, electronic density and chemical inertness was assessed and critically correlated to their catalytic potential. This strategy opens up new avenues for design of complex architectures of either single or multi-metal alloy NMMs with enhanced surface properties for various applications

Assessing the temporal stability of surface functional groups introduced by plasma treatments on the outer shells of carbon nanotubes

Plasma treatments are emerging as superior efficiency treatment for high surface to volume ratio materials to tune functional group densities and alter crystallinity due to their ability to interact with matter at the nanoscale. The purpose of this study is to assess for the first time the long term stability of surface functional groups introduced across the surface of carbon nanotube materials for a series of oxidative, reductive and neutral plasma treatment conditions. Both plasma duration dose matrix based exposures and time decay experiments, whereby the surface energy of the materials was evaluated periodically over a one-month period, were carried out. Although only few morphological changes across the graphitic planes of the carbon nanotubes were found under the uniform plasma treatment conditions, the time dependence of pertinent work functions, supported by Raman analysis, suggested that the density of polar groups decreased non-linearly over time prior to reaching saturation from 7 days post treatment. This work provides critical considerations on the understanding of the stability of functional groups introduced across high specific surface area nano-materials used for the design of nano-composites, adsorptive or separation systems, or sensing materials and where interfacial interactions are key to the final materials performance