69 research outputs found
Photothermal Length Measurement of Vickers Cracks in SI3N4
Ceramic materials are gaining ever increasing popularity in different high—technology applications, especially in those where high temperatures are used. However, the mechanical strength of ceramics has thus far set limitations on their utilizing. The critical size of cracks in ceramic material depends on the force applied, but in typical applications it is less than 100 µm. This small size in addition to the fact that critical cracks are often closed makes the use of conventional NDT methods in crack detection very difficult or even impossible. More nuisance comes from the porosity of the material which takes methods needing immersing in liquids out of consideration
Contrast Mechanisms in the Thermoacoustic Microscope
The thermoacoustic microscope [1–9] uses a modulated particle beam (electrons, photons or ions) as a heat source on (or near) the surface of the sample, and a piezoelectric transducer attached elsewhere on the sample as a detector of acoustic waves generated by the beam. The modulation frequency is typically 103 to 107 Hz, so the acoustic signal is in the sonic to ultrasonic range. These acoustic signals are used to produce images of surface and near surface features of the solid by scanning the source over the face of the sample. In order to make full use of this type of microscope as a quantitative NDE tool, one must be able to interpret the images in terms of the physical properties of the features being imaged. The interpretation of an image resulting from variations in, say, the elastic constants as if it were caused by variations in, say, thermal expansion coefficient, could lead to totally incorrect conclusions about the nature of a defect. This paper summarizes a theoretical analysis which can form a basis for assessing the relative importance of different contrast mechanisms
Can we rate public support for democracy in a comparable way? Cross-national equivalence of democratic attitudes in the World Value Survey
In this study we examine the cross-cultural equivalence of two scales that measure attitudes toward democracy across 36 countries in the World Value Survey (WVS) 2000. We examine the equivalence of these scales in order to explore if we can meaningfully compare democratic attitudes across countries. Multiple group confirmatory factor analyses (MGCFA) is applied to answer this question. The analyses indicate that the scales may be compared but only to a certain extent and not across all the countries. We close this article by discussing the implications of the findings
A Numerical Study on Temperature Distribution of Line Heated Anisotropic Carbon Fiber Composites
Earlier we have described the various uses of infrared line scanner based thermal nondestructive testing equipment [1]. Time constants of measurements made with these kind of equipment are very suitable for testing carbon fiber composites. Scanning a line heat source over a sample surface causes a nonuniform temperature distribution in the sample. In addition to the heat flow normal to the surface, lateral heat flow exists in the surface plane. In the case of carbon fiber composites with a specific oriented structure, the surface temperature distributions depend on the direction where the line source moves. Generally, this is true of any sample having anisotropic thermal conductivity. In oriented carbon fiber composites the bulk thermal conductivity can be considered anisotropic, because the heat transfer in the composite is different in the direction of the fibers compared to perpendicular directions [2,3]. Varis et al. have discussed these phenomenon briefly with the testing of carbon fiber tubes using numerical methods [4]. Here, we represent a more detailed numerical analysis of the effects of line heating on a sample having anisotropic thermal conductivity
Ambivalence toward men: comparing sexism among Polish, South African and British university students
This study extends the literature on attitudes toward gender roles by exploring whether the nature of sexism (i.e., benevolence and hostility directed at men) differs among university students from two under-researched countries, Poland (n = 190) and South Africa (n = 188), in a comparison with students in the United Kingdom (n = 166). Based on empirical literature applying Ambivalent Sexism Theory, and in the light of the socio-political context, it was hypothesized that: (1) both hostile and benevolent attitudes toward men in Poland would be more liberal than in South Africa and more conservative than in the United Kingdom, and (2), women would exhibit more hostile but less benevolent attitudes than men in relatively more conservative South Africa. The Ambivalence to Men Inventory was used to measure the two types of sexist attitudes about men. Findings supported the first hypothesis for hostile attitudes and partially for benevolent attitudes. South African and Polish students were more benevolent and hostile to men than British students, and students from South Africa were more hostile than those from Poland. Moreover, as predicted, a significant country-by-gender interaction revealed that South African women had more hostile and less benevolent attitudes to men than South African men. No such gender gap was present in the case of hostile attitudes in Poland and benevolent attitudes in the United Kingdom. Findings are discussed in terms of Ambivalent Sexism Theory and the countries’ socio-cultural context
Value priorities and their relations with quality of life in the Baby Boomer generation of Lithuanian nurses: a cross-sectional survey
<p>Abstract</p> <p>Background</p> <p>The understanding of the values of nurses is especially important, since nurses constitute 80% of workforce in the healthcare system in Lithuania. In addition to that, nursing is one of the major constituents of healthcare. The aim of this study was to determine what values predominate in the cohort of Baby Boomer nurses, and to evaluate the relation of these values with quality of life using M. Rokeach's terminal and instrumental values scale. M.Rokeach distinguished terminal values (such as world peace, wisdom, and happiness), which are preferred end-states of existence, and instrumental values (such as responsibility and cooperation), which are preferred modes of conduct.</p> <p>Methods</p> <p>We performed a representative anonymous questionnaire-based inquiry of nurses working in regional hospitals of Lithuania. The nurses who participated in the study were distributed into four work cohorts: the Veterans, the Baby Boomers, the Generation Xers, and the Generation Nexters. The majority of the nurses belonged to the Baby Boomers and the Generation Xers cohorts. Since in Lithuania, like in the whole Europe, the representatives of the Baby Boomers generation are predominating among working people, we selected this cohort (N = 387) for the analysis. The survey data was processed using the SPSS statistical software package</p> <p>Results</p> <p>The main values in life were family security, tranquility, and a sense of accomplishment. However, such values as true friendship, equality, and pleasurable and leisured life were seen as rather insignificant. The most important instrumental values were honesty, skillfulness, and responsibility. Our study showed a statistically significant (albeit weak) correlation between the QOL and terminal values such as the sense of accomplishment, tranquility, equality, and pleasure, as well as the instrumental value – obedience. We detected a statistically significant relationship between good QOL and satisfaction with oneself, relationships with the surrounding people, and friends' support.</p> <p>Conclusion</p> <p>The findings of our study showed that, although Lithuania was under a totalitarian regime for 50 years, both the terminal and the instrumental values of the Baby Boomers generation are very similar to those of the same generation in other countries.</p
Picosecond Transient Thermoreflectance: Time-Resolved Studies of Thin Film Thermal Transport
The advent of new and sophisticated material growth processes (molecular beam epitaxy, chemical vapor deposition and ion sputter deposition) has produced new exotic materials such as amorphous alloys and compositionally modulated structures [1]. The atomic level structure of these materials can be proved by techniques such as x-ray diffraction. The electrical and thermal transport properties are also used to characterize these materials, which are usually deposited as thin films onto supporting substrates. Although the substrate may be electrically isolated from the film, complete thermal isolation is more difficult to achieve and thermal transport measurements are complicated.</p
Satisfaction with Creativity: A Study of Organizational Characteristics and Individual Motivation
In answering the question of what influences satisfaction with creativity in the workplace, this work takes into account the extent to which the organization supports human aspiration to act creatively. The work throughout reflects a pragmatist approach to creativity and fulfillment, bridging it with needs theory in psychology. The empirical model uses survey data encompassing over 4,000 workers in Italian social enterprises. Results show that satisfaction with creativity is supported, at organizational level, by teamwork, autonomy, domain-relevant competences, as well as by inclusive, fair processes and relationships. At the individual level, satisfaction with creativity is enhanced by the strength of intrinsic initial motivations. The analysis of interaction terms shows that teamwork and workers' initial motivations are complementary in enhancing satisfaction with creativity, while a high degree of domain-relevant competences appears to substitute advice and supervision by superiors in accomplishing the desired level of creative action
Cross-Cultural Sexism and the Effectiveness of Gender (Non)Traditional Advertising: A Comparison of Purchase Intentions in Poland, South Africa, and the United Kingdom.
Findings regarding the effectiveness of (non)traditionally gendered advertisements are mixed and largely emanate from the United States. We tested the stereotype content model and ambivalent sexism theory cross-nationally in an advertising context and predicted that paternalistic (vs. envious) female stereotypes will trigger higher purchase intent (PI) irrespective of country (Hypothesis 1), viewers’ benevolent sexism will positively predict PI for paternalistic housewife advertisements (Hypothesis 2a), viewers’ hostile sexism will negatively predict PI for envious businesswoman advertisements (Hypothesis 2b), and these relationships with sexism will be confined to less gender egalitarian countries (i.e., Poland and South Africa) (Hypothesis 3). Statistical analyses of data from 468 Polish, South African, and British university students supported Hypothesis 1 and partially supported Hypotheses 2 and 3. The predicted patterns held for South Africa, but in Poland, viewers’ benevolence positively predicted PI for both advertisement types, with the exception of highly hostile women. British viewers’ hostility positively predicted PI for the housewife advertisement. Our findings support the cross-cultural applicability of the stereotype content model to advertising and suggest that the predictive role of sexism changes depending on its type, advertisement type, country, and gender. We recommend that advertisers should adopt a nuanced approach in predicting the effectiveness of gendered advertisements
- …
