26,377 research outputs found

    Axial light emission and Ar metastable densities in a parallel plate dc micro discharge in steady state and transient regimes

    Full text link
    Axial emission profiles in a parallel plate dc micro discharge (feedgas: argon; discharge gap d=1mm; pressure p=10Torr) were studied by means of time resolved imaging with a fast ICCD camera. Additionally, volt-ampere (V-A) characteristics were recorded and Ar* metastable densities were measured by tunable diode laser absorption spectroscopy (TDLAS). Axial emission profiles in the steady state regime are similar to corresponding profiles in standard size discharges (d=1cm, p=1Torr). For some discharge conditions relaxation oscillations are present when the micro discharge switches periodically between low current Townsend-like mode and normal glow. At the same time the axial emission profile shows transient behavior, starting with peak distribution at the anode, which gradually moves towards the cathode during the normal glow. The development of argon metastable densities highly correlates with the oscillating discharge current. Gas temperatures in the low current Townsend-like mode (T= 320-400K) and the high current glow mode (T=469-526K) were determined by the broadening of the recorded spectral profiles as a function of the discharge current.Comment: submitted to Plasma Sources Sci. Techno

    The potential roles of hepatocyte growth factor (HGF)-MET pathway inhibitors in cancer treatment

    Get PDF
    MET is located on chromosome 7q31 and is a proto-oncogene that encodes for hepa-tocyte growth factor (HGF) receptor, a member of the receptor tyrosine kinase (RTK) family. HGF, also known as scatter factor (SF), is the only known ligand for MET. MET is a master regulator of cell growth and division (mitogenesis), mobility (motogenesis), and differentiation (morphogenesis); it plays an important role in normal development and tissue regeneration. The HGF-MET axis is frequently dysregulated in cancer by MET gene amplification, translocation, and mutation, or by MET or HGF protein overexpression. MET dysregulation is associated with an increased propensity for metastatic disease and poor overall prognosis across multiple tumor types. Targeting the dysregulated HGF-MET pathway is an area of active research; a number of monoclonal antibodies to HGF and MET, as well as small molecule inhibitors of MET, are under development. This review summarizes the key biological features of the HGF-MET axis, its dysregulation in cancer, and the therapeutic agents targeting the HGF-MET axis, which are in development. © 2014 Parikh et al

    A systematic simulation methodology for LNG ship operations in port waters: a case study in Meizhou Bay

    Get PDF
    With the increment for liquefied natural gas (LNG) demand, LNG carriers are becoming larger in size. The operational safety of the carriers and the associated terminals is increasingly attracting attention. This is particularly true when a large LNG vessel approaches a terminal, requiring a detailed investigation of ship handling in port waters, especially in certain unusual cases. A full mission simulator provides an effective tool for research and training in operations of both port terminals and ships. This paper presents an experimental design methodology of the full mission simulation. The details as to how the simulation is achieved are described, and the simulation strategies applicable to LNG ships are specified. A typical case study is used to demonstrate and verify the proposed design methodology. The proposed methodology of the full mission simulation provides guidance for port safety research, risk evaluation and seafarer training. © 2017 Institute of Marine Engineering, Science & Technolog

    The impact of diabetes on the success of dental implants and periodontal healing

    Get PDF
    Dental implant is one of the restorative methods to replace missing teeth. As implants are directly anchored into bones, they provide stability, a more natural appearance, and minimize the risk of bone resorption and atrophy. However, studies found that diabetes mellitus patients had a slower healing process after surgery because of the reduction of vascular supply due to microangiopathies, decreased host defense, formation of advanced glycation end-products (AGEs), reduction of collagen production and increased collagenase activity. Diabetes mellitus patients may pose contraindications to dental implants. As a result of that, dental implantation failure rate in diabetic patients is much higher than that in non-diabetic patients. In this clinical experiment, we compared the amount of blood cells, and cytokines production 24 h post implantations, and the implant mobility 90 days post-surgery between controlled type 2 diabetic patients and the non-diabetic patients. It was aimed to investigate the suitability of diabetic patients to have dental implants and the efficacy of the amount of dental implants related to the success rates. 138 patients with type 2 diabetics and 140 healthy subjects, who had one to three adjacent edentulous spaces, were selected. Dental implantation surgeries were performed under local anesthesia. Wounds were sutured and all subjects were given 0.2% chlorohexidine mouthwash for 14 days. Complete blood picture and cytokines production were assayed before operation, as well as on days 1, 2, and 5 after implantation. Implant mobility and periodontal wound healing were monitored once in a fortnight up to 90 days. There were no statistically significant differences in the production of cytokines. In 138 diabetic patients, 255 implants were presented with second degree mobility 90 days after surgery while the same was demonstrated in 48 out of 346 implants from the healthy subjects. These implants were considered failures and were extracted. Implant failure in diabetics was significantly greater than that in non-diabetics when multiple adjoining implants were placed. © 2009 Academic Journals.published_or_final_versio

    Facile Synthesis of High Quality Graphene Nanoribbons

    Full text link
    Graphene nanoribbons have attracted attention for their novel electronic and spin transport properties1-6, and because nanoribbons less than 10 nm wide have a band gap that can be used to make field effect transistors. However, producing nanoribbons of very high quality, or in high volumes, remains a challenge. Here, we show that pristine few-layer nanoribbons can be produced by unzipping mildly gas-phase oxidized multiwalled carbon nanotube using mechanical sonication in an organic solvent. The nanoribbons exhibit very high quality, with smooth edges (as seen by high-resolution transmission electron microscopy), low ratios of disorder to graphitic Raman bands, and the highest electrical conductance and mobility reported to date (up to 5e2/h and 1500 cm2/Vs for ribbons 10-20 nm in width). Further, at low temperature, the nanoribbons exhibit phase coherent transport and Fabry-Perot interference, suggesting minimal defects and edge roughness. The yield of nanoribbons was ~2% of the starting raw nanotube soot material, which was significantly higher than previous methods capable of producing high quality narrow nanoribbons1. The relatively high yield synthesis of pristine graphene nanoribbons will make these materials easily accessible for a wide range of fundamental and practical applications.Comment: Nature Nanotechnology in pres

    Angiosperms Are Unique among Land Plant Lineages in the Occurrence of Key Genes in the RNA-Directed DNA Methylation (RdDM) Pathway

    Get PDF
    We are grateful for the FP7 Marie Curie IEF (Lu Ma), the FP7 Marie Curie ITN INTERCROSSING (Andrea Hatlen), the Czech Science Foundation (501/12/G090, Ales Kovarik), China Scholarship Council (Wencai Wang), and NERC (NE/ G01724/1, Laura Kelly, Ilia Leitch, Andrew Leitch). The Illumina sequencing of Fritillaria was funded by NERC (NE/G01724/1) and generated by the Centre of Genomic Research in the University of Liverpool, UK. This research utilised Queen Mary's MidPlus computational facilities, supported by QMUL Research-IT and funded by EPSRC grant EP/K000128/1. We thank an anonymous referee for a rigorous, insightful and helpful revie

    High-Temperature Transport Properties of Yb4−xSmxSb3

    Get PDF
    Polycrystalline L4Sb3 (L = La, Ce, Sm, and Yb) and Yb4−x Sm x Sb3, which crystallizes in the anti-Th3P4 structure type (I-43d no. 220), were synthesized via high-temperature reaction. Structural and chemical characterization were performed by x-ray diffraction and electronic microscopy with energy-dispersive x-ray analysis. Pucks were densified by spark plasma sintering. Transport property measurements showed that these compounds are n-type with low Seebeck coefficients, except for Yb4Sb3, which shows semimetallic behavior with hole conduction above 523 K. By partially substituting Yb by a trivalent rare earth we successfully improved the thermoelectric figure of merit of Yb4Sb3 up to 0.7 at 1273 K
    corecore