Structural studies of cesium, lithium/cesium and sodium/cesium bis(trimethylsilyl)amide (HMDS) complexes

Reacting cesium fluoride with an equimolar n-hexane solution of lithium bis(trimethylsilyl)amide (LiHMDS), allows the isolation of CsHMDS (1) in 80% yield (after sublimation). This preparative route to 1 negates the need for pyrophoric Cs metal or organocesium reagents in its synthesis. If a 2:1 LiHMDS:CsF ratio is employed the heterobimetallic polymer [LiCs(HMDS)2]∞ 2 was isolated (57% yield). By combining equimolar quantities of NaHMDS and CsHMDS in hexane/toluene [NaCs(HMDS)2(toluene)]∞ 3 was isolated (62% yield). Attempts to prepare the corresponding potassium-cesium amide failed, and instead yielded the known monometallic polymer [Cs(HMDS)(toluene)]∞ 4. With the aim of expanding the structural diversity of Cs(HMDS) species, 1 was reacted with several different Lewis basic donor molecules of varying denticity; namely, (R,R)-N,N,N′,N′-tetramethylcyclohexane-1,2-diamine [(R,R)-TMCDA] and N,N,Nʹ,Nʹ-tetramethylethylenediamine (TMEDA), N,N,Nʹ,Nʹʹ,Nʹʹ-pentamethyldiethylenetriamine (PMDETA), tris[2-(dimethylamino)ethyl]amine (Me6-TREN) and tris[2-(2-methoxyethoxy)ethyl]amine (TMEEA). These reactions yielded dimeric [Cs(HMDS)·donor]2 5-7 [where donor is (R,R)-TMCDA, TMEDA and PMDETA respectively], the tetranuclear ‘open’-dimer [{Me6-TREN·Cs(HMDS)}2{Cs(HMDS)}2] 8 and the monomeric Cs(HMDS)·TMEEA 9. Complexes 2,3 and 5-9 were characterized by X-ray crystallography and in solution by multinuclear NMR spectroscopy

Opening the black box of mixed-metal TMP metallating reagents : direct cadmation or lithium-cadmium transmetallation?

Designed to remove some of the mystery surrounding mixed-metal TMP (2,2,6,6-tetramethylpiperidide) metallating reagents, this study examines in detail "LiCd(TMP)(3)'' in its own right. Previously established as an excellent "cadmating'' (Cd-H exchange) reagent towards a wide variety of aromatic substrates, "LiCd(TMP)(3)'' has been investigated by H-1, C-13 and Cd-113 NMR studies as well as by DOSY NMR spectroscopy. This evidence puts a question mark against its ate formulation implying it exists in THF solution as two independent homometallic amides. Exploring the reactivity of "LiCd(TMP)(3)'' with anisole as a test substrate, both experimentally by NMR studies and theoretically by DFT studies suggests a two-step lithiation/transmetallation process in which the initially formed ortho-lithiated species undergoes a reaction with Cd(TMP)(2) to form new Cd-C and Li-N bonds. For completeness, the homometallic cadmium component Cd(TMP)(2) has been comprehensively characterised for the first time including a crystal structure determination revealing a near-linear N-Cd-N arrangement

Lithium and aluminium carbamato derivatives of the utility amide 2, 2, 6, 6- tetramethylpiperidide

Insertion of CO2 into the metal-N bond of a series of synthetically-important alkali-metal TMP (2,2,6,6-tetramethylpiperidide) complexes has been studied. Determined by X-ray crystallography, the molecular structure of the TMEDA-solvated Li derivative shows a central 8-membered (LiOCO)2 ring lying in a chair conformation with distorted tetrahedral lithium centres. While trying to obtain crystals of a THF solvated derivative, a mixed carbonato/carbamato dodecanuclear lithium cluster was formed containing two central (CO3)2- fragments and eight O2CTMP ligands with four distinct bonding modes. A bisalkylaluminium carbamato complex has also been prepared via two different methods (CO2 insertion into a pre-formed Al-N bond and ligand transfer from the corresponding lithium reagent) which adopts a dimeric structure in the solid state

Neutral and Cationic Rare Earth Metal Alkyl and Benzyl Compounds with the 1,4,6-Trimethyl-6-pyrrolidin-1-yl-1,4-diazepane Ligand and Their Performance in the Catalytic Hydroamination/Cyclization of Aminoalkenes

A new neutral tridentate 1,4,6-trimethyl-6-pyrrolidin-1-yl-1,4-diazepane (L) was prepared. Reacting L with trialkyls M(CH2SiMe3)3(THF)2 (M = Sc, Y) and tribenzyls M(CH2Ph)3(THF)3 (M = Sc, La) yielded trialkyl complexes (L)M(CH2SiMe3)3 (M = Sc, 1; M = Y, 2) and tribenzyl complexes (L)M(CH2Ph)3 (M = Sc, 3; M = La, 4). Complexes 1 and 2 can be converted to their corresponding ionic compounds [(L)M(CH2SiMe3)2(THF)][B(C6H5)4] (M = Sc, Y) by reaction with [PhNMe2H][B(C6H5)4] in THF. Complexes 3 and 4 can be converted to cationic species [(L)M(CH2Ph)2]+ by reaction with [PhNMe2H][B(C6F5)4] in C6D5Br in the absence of THF. The neutral complexes 1-4 and their cationic derivatives were studied as catalysts for the hydroamination/cyclization of 2,2-diphenylpent-4-en-1-amine and N-methylpent-4-en-1-amine reference substrates and compared with ligand-free Sc, Y, and La neutral and cationic catalysts. The most effective catalysts in the series were the cationic L-yttrium catalyst (for 2,2-diphenylpent-4-en-1-amine) and the cationic lanthanum systems (for N-methylpent-4-en-1-amine). For the La catalysts, evidence was obtained for release of L from the metal during catalysis.

1,8-Bis(silylamido)naphthalene complexes of magnesium and zinc synthesized through alkane elimination reactions

The reactions between magnesium or zinc alkyls and 1,8-bis(triorganosilyl)diaminonaphthalenes afford the 1,8-bis(triorganosilyl)diamidonaphthalene complexes with elimination of alkanes. The reaction between 1,8-C10H6(NSiMePh2H)2 and one or two equivalents of MgnBu2 affords two complexes with differing coordination environments for the magnesium; the reaction between 1,8-C10H6(NSiMePh2H)2 and MgnBu2 in a 1:1 ratio affords 1,8-C10H6(NSiMePh2)2{Mg(THF)2} (1), which features a single magnesium centre bridging both ligand nitrogen donors, whilst treatment of 1,8-C10H6(NSiR3H)2 (R3 = MePh2, iPr3) with two equivalents of MgnBu2 affords the bimetallic complexes 1,8-C10H6(NSiR3)2{nBuMg(THF)}2 (R3 = MePh2 2, R3 = iPr3 3), which feature four-membered Mg2N2 rings. Similarly, 1,8-C10H6(NSiiPr3)2{MeMg(THF)}2 (4) and 1,8-C10H6(NSiMePh2)2{ZnMe}2 (5) are formed through reactions with the proligands and two equivalents of MMe2 (M = Mg, Zn). The reaction between 1,8-C10H6(NSiMePh2H)2 and two equivalents of MeMgX affords the bimetallic complexes 1,8-C10H6(NSiMePh2)2(XMgOEt2)2 (X = Br 6; X = I 7). Very small amounts of [1,8-C10H6(NSiMePh2)2{IMg(OEt2)}]2 (8), formed through the coupling of two diamidonaphthalene ligands at the 4-position with concomitant dearomatisation of one of the naphthyl arene rings, were also isolated from a solution of 7

X-ray absorption spectroscopy systematics at the tungsten L-edge

A series of mononuclear six-coordinate tungsten compounds spanning formal oxidation states from 0 to +VI, largely in a ligand environment of inert chloride and/or phosphine, has been interrogated by tungsten L-edge X-ray absorption spectroscopy. The L-edge spectra of this compound set, comprised of [W<sup>0</sup>(PMe<sub>3</sub>)<sub>6</sub>], [W<sup>II</sup>Cl<sub>2</sub>(PMePh<sub>2</sub>)<sub>4</sub>], [W<sup>III</sup>Cl<sub>2</sub>(dppe)<sub>2</sub>][PF<sub>6</sub>] (dppe = 1,2-bis(diphenylphosphino)ethane), [W<sup>IV</sup>Cl<sub>4</sub>(PMePh<sub>2</sub>)<sub>2</sub>], [W<sup>V</sup>(NPh)Cl<sub>3</sub>(PMe<sub>3</sub>)<sub>2</sub>], and [W<sup>VI</sup>Cl<sub>6</sub>] correlate with formal oxidation state and have usefulness as references for the interpretation of the L-edge spectra of tungsten compounds with redox-active ligands and ambiguous electronic structure descriptions. The utility of these spectra arises from the combined correlation of the estimated branching ratio (EBR) of the L<sub>3,2</sub>-edges and the L<sub>1</sub> rising-edge energy with metal Z<sub>eff</sub>, thereby permitting an assessment of effective metal oxidation state. An application of these reference spectra is illustrated by their use as backdrop for the L-edge X-ray absorption spectra of [W<sup>IV</sup>(mdt)<sub>2</sub>(CO)<sub>2</sub>] and [W<sup>IV</sup>(mdt)<sub>2</sub>(CN)<sub>2</sub>]<sup>2–</sup> (mdt<sup>2–</sup> = 1,2-dimethylethene-1,2-dithiolate), which shows that both compounds are effectively W<sup>IV</sup> species. Use of metal L-edge XAS to assess a compound of uncertain formulation requires: 1) Placement of that data within the context of spectra offered by unambiguous calibrant compounds, preferably with the same coordination number and similar metal ligand distances. Such spectra assist in defining upper and/or lower limits for metal Z<sub>eff</sub> in the species of interest; 2) Evaluation of that data in conjunction with information from other physical methods, especially ligand K-edge XAS; 3) Increased care in interpretation if strong π-acceptor ligands, particularly CO, or π-donor ligands are present. The electron-withdrawing/donating nature of these ligand types, combined with relatively short metal-ligand distances, exaggerate the difference between formal oxidation state and metal Z<sub>eff</sub> or, as in the case of [W<sup>IV</sup>(mdt)<sub>2</sub>(CO)<sub>2</sub>], add other subtlety by modulating the redox level of other ligands in the coordination sphere

The ketimide ligand is not just an inert spectator: heteroallene insertion reactivity of an actinide-ketimide linkage in a thorium carbene amide ketimide complex

The ketimide anion R2C[DOUBLE BOND]N− is an important class of chemically robust ligand that binds strongly to metal ions and is considered ideal for supporting reactive metal fragments due to its inert spectator nature; this contrasts with R2N− amides that exhibit a wide range of reactivities. Here, we report the synthesis and characterization of a rare example of an actinide ketimide complex [Th(BIPMTMS){N(SiMe3)2}(N[DOUBLE BOND]CPh2)] [2, BIPMTMS=C(PPh2NSiMe3)2]. Complex 2 contains Th[DOUBLE BOND]Ccarbene, Th[BOND]Namide and Th[BOND]Nketimide linkages, thereby presenting the opportunity to probe the preferential reactivity of these linkages. Importantly, reactivity studies of 2 with unsaturated substrates shows that insertion reactions occur preferentially at the Th[BOND]Nketimide bond rather than at the Th[DOUBLE BOND]Ccarbene or Th[BOND]Namide bonds. This overturns the established view that metal-ketimide linkages are purely inert spectators

Chemistry of o-Xylidene-Metal Complexes. Part 3.' Tungsten o-Xylidene Complexes derived from Tetrachloro(oxo)tungsten(vl) ; X-Ray Crystal Structures of [~( C H 2 C 6 H 4~H z -o )~]~~.~~~~6 and [{~(CH2C,H4CH2=~)20}2~g(C4H*0)41*

Reaction of WCI4O with the di-Grignard reagent O-C&(CH2MgC1)2 or the chloride-free ' o-xylidene ' complex Mg(CH2C6H4CH2-o) (thf) in tetrahydrofuran (thf) yields either the thermally stable tris(chelate), [We use the umbrella term ' o-xylidenemetal complex ' to describe, without prejudice as to bonding, all O-C~I&(CH~)~-metal complexes in which the organic ligand binds in (a) a bridging mode, as i

Tin(IV) chalcogenide complexes:single source precursors for SnS, SnSe and SnTe nanoparticle synthesis

A family of tin(IV) bis(hexamethylsilylamide) complexes 2–9 have been synthesized by reaction of [Sn{N(SiMe3)2}2] (1) with the diphenyl dichalcogenanes Ph2E2 (E = S, Se, Te), the radical species TEMPO, or the group 16 elements to form the complexes [(PhE)2Sn{N(SiMe3)2}2] (2–4) and [(TEMPO)2Sn{N(SiMe3)2}2] (5), and [{(Me3Si)2N}2Sn(µ2-E)]2 (6–9) (E = S, 2 & 6; E = Se 3 & 7; E = Te, 4 & 9, E = O2, 9). The isolated tin complexes were characterized by elemental analysis, NMR spectroscopy, and the molecular structures of the complexes were determined by single crystal X-ray diffraction. Thermogravimetric analysis showed complexes 2–4 and 6–8 all to have residual masses close to those expected for the formation of the corresponding “SnE” systems. Complexes 2–4 and 6–8 were also assessed for their utility in the formation of nanoparticles. The materials obtained were characterized by powder X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and energy-dispersive X-ray analysis (EDX). Analysis showed formation of SnSe and SnTe from complexes 3–4 and 6–7, respectively