Prospection and Evaluation of (Hemi) Cellulolytic Enzymes Using Untreated and Pretreated Biomasses in Two Argentinean Native Termites

Saccharum officinarum bagasse (common name: sugarcane bagasse) and Pennisetum purpureum (also known as Napier grass) are among the most promising feedstocks for bioethanol production in Argentina and Brazil. In this study, both biomasses were assessed before and after acid pretreatment and following hydrolysis with Nasutitermes aquilinus andCortaritermes fulviceps termite gut digestome. The chemical composition analysis of the biomasses after diluted acid pretreatment showed that the hemicellulose fraction was partially removed. The (hemi) cellulolytic activities were evaluated in bacterial culture supernatantsof termite gut homogenates grown in treated and untreated biomasses. In all cases, we detected significantly higher endoglucanase and xylanase activities using pretreated biomasses compared to untreated biomasses, carboxymethylcellulose and xylan. Several protein bands with (hemi) cellulolytic activity were detected in zymograms and two-dimensionalgel electrophoresis. Some proteins of these bands or spots were identified as xylanolytic peptides by mass spectrometry. Finally, the diversity of cultured cellulolytic bacterial endosymbionts associated to both Argentinean native termite species was analyzed. This study describes, for the first time, bacterial endosymbionts and endogenous (hemi) cellulases of two Argentinean native termites as well as their potential application in degradation of lignocellulosic biomass for bioethanol production.Fil: Ben Guerrero, Emiliano. Instituto Nacional de Tecnología Agropecuaria. Centro de Investigación en Ciencias Veterinarias y Agronómicas. Instituto de Biotecnología; ArgentinaFil: Arneodo Larochette, Joel Demián. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Instituto Nacional de Tecnología Agropecuaria. Centro de Investigación en Ciencias Veterinarias y Agronómicas. Instituto de Microbiología y Zoología Agrícola; ArgentinaFil: Bombarda Campanha, Raquel. Ministerio da Agricultura Pecuaria e Abastecimento de Brasil. Empresa Brasileira de Pesquisa Agropecuaria; BrasilFil: Oliveira, Patrícia Abrão de. Ministerio da Agricultura Pecuaria e Abastecimento de Brasil. Empresa Brasileira de Pesquisa Agropecuaria; BrasilFil: Labate, Mônica T. Veneziano. Universidade de Sao Paulo; BrasilFil: Cataldi, Thaís Regiani. Universidade de Sao Paulo; BrasilFil: Campos, Eleonora. Instituto Nacional de Tecnología Agropecuaria. Centro de Investigación en Ciencias Veterinarias y Agronómicas. Instituto de Biotecnología; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Cataldi, Ángel Adrián. Instituto Nacional de Tecnología Agropecuaria. Centro de Investigación en Ciencias Veterinarias y Agronómicas. Instituto de Biotecnología; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Labate, Carlos A.. Universidade de Sao Paulo; BrasilFil: Rodrigues, Clenilson Martins. Ministerio da Agricultura Pecuaria e Abastecimento de Brasil. Empresa Brasileira de Pesquisa Agropecuaria; BrasilFil: Talia, Paola Monica. Instituto Nacional de Tecnología Agropecuaria. Centro de Investigación en Ciencias Veterinarias y Agronómicas. Instituto de Biotecnología; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentin

Fabrication of copper foams by powder metallurgy

Se presenta un método de fabricación de esponjas de cobre por pulvimetalurgia, empleando perlas de urea como formadores de poros que son removidas por disolución en agua antes de sinterizar el compacto. Este método permite un control preciso de las características de las celdas (tamaño, forma y distribución), obteniéndose una porosidad de celdas interconectadas. El empleo de metales en polvo lleva a tener una porosidad asociada a las paredes de las mismas que afecta a las propiedades mecánicas, provocando la falla a tensiones menores de lo esperable. Se optimizó el método de fabricación seleccionando los parámetros de sinterizado (presión de compactado, temperatura y atmósfera). Para caracterizar la meso y microestructura de las muestras se emplearon técnicas de microscopía tradicionales (microscopio electrónico de barrido SEM) y tomografía de rayos x. Esta última técnica permite visualizar en 3D la distribución de las celdas, realizar una caracterización completa de la mesoestructura, evaluar la porosidad de las muestras y seguir la evolución de la deformación de las celdas en ensayos de compresión.A method for the fabrication of copper foams by powder metallurgy, employing carbamide beads as space holders, is presented. These are removed by water dissolution before sintering the compact. The method allows for a precise control of the cell characteristics (size, shape and distribution) within an interconnected porosity. The use of metal powder promotes the formation of an inherent porosity in the cell walls that affects their mechanical properties, producing failure at a lower than expected tension. Optimization of the method was achieved by selecting the sintering parameters (compaction pressure, temperature and atmosphere). The mesostructure and microstructure of the samples were characterized by traditional microscopy (scanning electron microscope SEM) and x-ray tomography. The latter technique allows a 3D visualization of the cell distribution, a complete characterization of the mesostructure, the evaluation of the porosity and to follow the cell evolution during compression tests.Fil: Malachevsky, Maria Teresa. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; ArgentinaFil: Bertolino, Graciela Mabel. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Arneodo Larochette, Pierre Paul. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; ArgentinaFil: Baruj, Alberto Leonardo. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; ArgentinaFil: Oliber, Edgardo Antonio. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; ArgentinaFil: D'ovido, Claudio. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; ArgentinaFil: Cuscueta, Diego Javier. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentin

Perceiving Pain in Others: Automatic and Controlled Mechanisms

A

Improvements in the hydrogen storage properties of the Mg(NH2)2-LiH composite by KOH addition

Potassium-containing compounds, such as KH, KOH, KNH2 and different potassium halides, have shown positive effects on the dehydrogenation properties of the Li-Mg-N-H system. However, it is still discussed whether the K-compounds modify the thermodynamics of the system or if they have only a catalytic effect. In this work the impact of the addition of two K-containing compounds (0.08 mol% of KCl and KOH) on the hydrogen storage performance of the Mg(NH2)2-LiH composite was studied. The KOH incorporation reduced the dehydrogenation temperature from 197 °C to 154 °C, beginning the process at low temperature (∼70 °C). The doped sample was able to reversibly absorb and desorb 4.6 wt% of hydrogen with improved kinetics; dehydrogenation rates were increased four times, whereas absorptions required 20% less time to be completed in comparison to the pristine material. The thermodynamic destabilization of the Mg(NH2)2-2LiH composite by the addition of a small amount of KOH was demonstrated by an increment of 30% in the dehydrogenation equilibrium pressure. According to detailed structural investigations, the KH formed by the KOH decomposition through milling and thermal treatment, can replace LiH and react with Mg(NH2)2 to produce a mixed potassium-lithium amide (Li3K(NH2)4). The KH role is not limited to catalysis, but rather it is responsible for the thermodynamic destabilization of the Mg(NH2)2-LiH composite and it is actively involved in the dehydrogenation process.Fil: Amica, Guillermina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Comisión Nacional de Energía Atómica. Gerencia del Área de Energía Nuclear. Instituto Balseiro; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; ArgentinaFil: Enzo, S.. Università Degli Studi Di Sassari; ItaliaFil: Arneodo Larochette, Pierre Paul. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Comisión Nacional de Energía Atómica. Gerencia del Área de Energía Nuclear. Instituto Balseiro; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; ArgentinaFil: Gennari, Fabiana Cristina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Comisión Nacional de Energía Atómica. Gerencia del Área de Energía Nuclear. Instituto Balseiro; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentin

Effect of β-Li3N phase, Li2O addition and thermal treatment on the hydrogen sorption behavior of Li3N

The hydriding of Li3N to LiNH2 is investigated to clarify the influence of the beta-Li3N phase, the addition of Li2O and the thermal treatment of Li3N on the hydrogen storage properties of the Li-N-H system. As-milled Li3N displays fast initial absorption that is attributed to the formation of beta-Li3N nanograins, the increase of the surface area, and the presence of surface defects induced by mechanical milling. However, further hydrogen absorption is retarded in comparison with the as-received sample due to the presence of the beta-Li3N phase formed during milling. Thus, commercial Li3N exhibits the highest hydrogen storage capacity in the first cycle in comparison with as-heated Li3N and as-milled samples. In the case of Li2O addition, no interaction with Li3N was detected. The addition of LiH to the commercial Li3N, as-milled Li3N and Li3N-Li2O influences only the stability of the samples under hydrogen cycling. The hydrogen absorption/desorption behavior is mainly controlled by the amount of beta-Li3N formed during milling, while at long times the microstructure has a minor effect.Fil: Fernández Albanesi, Luisa Francisca. Comisión Nacional de Energía Atómica. Gerencia del Área de Energía Nuclear. Instituto Balseiro; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; ArgentinaFil: Arneodo Larochette, Pierre Paul. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina. Comisión Nacional de Energía Atómica. Gerencia del Área de Energía Nuclear. Instituto Balseiro; ArgentinaFil: Gennari, Fabiana Cristina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Comisión Nacional de Energía Atómica. Gerencia del Área de Energía Nuclear. Instituto Balseiro; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentin

Natural infection of Viola cornuta (Violaceae) with Cucumber mosaic virus, subgroup I

Plants of Viola cornuta displaying typical virus symptoms were observed during spring 2003 in a plant nursery in Córdoba, central Argentina. Electron microscopic examinations of symptomatic leaf samples revealed the presence of isometric virus-like particles about 30 nm in diameter. Subsequent serological analysis allowed the identification of the pathogen as a subgroup I strain of Cucumber mosaic virus (CMV). These results were confirmed by antigen capture - reverse transcription - polymerase chain reaction with specific CMV primers, and digestion with a restriction enzyme. This is the first report of CMV infecting V. cornuta in Argentina.Fil: Arneodo Larochette, Joel Demián. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Instituto Nacional de Tecnología Agropecuaria. Centro de Investigación en Ciencias Veterinarias y Agronómicas. Instituto de Fitopatología y Fisiología Vegetal; ArgentinaFil: de Breuil, Soledad. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; Argentina. Instituto Nacional de Tecnología Agropecuaria. Centro de Investigación en Ciencias Veterinarias y Agronómicas. Instituto de Fitopatología y Fisiología Vegetal; ArgentinaFil: Lenardon, Sergio Luis. Instituto Nacional de Tecnología Agropecuaria. Centro de Investigación en Ciencias Veterinarias y Agronómicas. Instituto de Fitopatología y Fisiología Vegetal; ArgentinaFil: Conci, Luis Rogelio. Instituto Nacional de Tecnología Agropecuaria. Centro de Investigación en Ciencias Veterinarias y Agronómicas. Instituto de Fitopatología y Fisiología Vegetal; Argentin

Increased pain intensity is associated with greater verbal communication difficulty and increased production of speech and co-speech gestures

Effective pain communication is essential if adequate treatment and support are to be provided. Pain communication is often multimodal, with sufferers utilising speech, nonverbal behaviours (such as facial expressions), and co-speech gestures (bodily movements, primarily of the hands and arms that accompany speech and can convey semantic information) to communicate their experience. Research suggests that the production of nonverbal pain behaviours is positively associated with pain intensity, but it is not known whether this is also the case for speech and co-speech gestures. The present study explored whether increased pain intensity is associated with greater speech and gesture production during face-to-face communication about acute, experimental pain. Participants (N = 26) were exposed to experimentally elicited pressure pain to the fingernail bed at high and low intensities and took part in video-recorded semi-structured interviews. Despite rating more intense pain as more difficult to communicate (t(25) = 2.21, p = .037), participants produced significantly longer verbal pain descriptions and more co-speech gestures in the high intensity pain condition (Words: t(25) = 3.57, p = .001; Gestures: t(25) = 3.66, p = .001). This suggests that spoken and gestural communication about pain is enhanced when pain is more intense. Thus, in addition to conveying detailed semantic information about pain, speech and co-speech gestures may provide a cue to pain intensity, with implications for the treatment and support received by pain sufferers. Future work should consider whether these findings are applicable within the context of clinical interactions about pain

Development of hydrides for hydrogen storage and purification

Entre las alternativas que existen para reducir los problemas asociados al uso de combustibles tradicionales se evalúa el uso del hidrógeno (H2) como una manera de transportar y almacenar energía. Su combustión no genera emisiones contaminantes, de manera que su utilización sería favorable en situaciones donde el uso de otro tipo de combustible fuera particularmente nociva (transporte de pasajeros en ciudades, p. ej.) o también como método de acumulación de energía (instalaciones rurales). Un sistema basado en H2 requiere soluciones tecnológicas para todas las etapas que comprenden desde su producción hasta su utilización. En este proyecto se abordan dos de ellas: la purificación de H2 y su almacenamiento, considerando que el conjunto de estas etapas es necesario para proveer de H2 a una aplicación específica. Tanto para el almacenamiento de H2 como para su purificación se propone el uso de materiales formadores de hidruros buscando los siguientes objetivos generales: 1) Desarrollar materiales de última generación (amiduros, sistemas desestabilizados) optimizando sus propiedades de almacenamiento. 2) Explorar el comportamiento a escalas de masa intermedias de materiales con propiedades conocidas. Este segundo objetivo tiene como finalidad avanzar en la construcción de un tanque almacenador de H2 apto para su utilización en instalaciones aisladas (no móviles). 3) Aprovechar la alta selectividad de la reacción de estos materiales con H2 frente a otros gases (CO y CO2, por ejemplo) para utilizarlos en purificación de H2. 4) Desarrollar hidruros nanoconfinados en matrices carbonáceas (eventualmente dopados) a fines de mejorar la estabilidad frente al ciclado de estos materiales almacenadores.The use of hydrogen (H2) as an energy vector is considered an alternative to reduce the problems associated with traditional fuels. Since its combustion does not generate polluting emissions, its use would be favorable in situations where another type of fuel is particularly harmful (city transport, for example) or where an energy storage media is required (rural facilities). A system based on H2 requires technological solutions for all the stages from production to utilization. In this project two of them are addressed: H2 purification and storage. The use of hydride forming materials is proposed for both H2 storage and purification, seeking the following general objectives: 1) Development of new materials (amides, destabilized systems) optimizing their storage properties. 2) Evaluation of the behavior at intermediate mass scales of materials with known properties. The purpose of this second objective is to advance in the construction of an H2 storage tank suitable for use in isolated (non-mobile) installations. 3) Application of these materials to H2 purification, based on the high selectivity of the reaction with H2 against other gases (CO and CO2, for example). 4) Development of nanoconfined hydrides in carbonaceous matrices (possibly doped) in order to improve the stability against cycling of these storage materials