Layer-by-layer formation of oligoelectrolyte multilayers: a combined experimental and computational study

For the first time, the combination of experimental preparation and results of fully atomistic simulations of an oligoelectrolyte multilayer (OEM) made of poly(diallyl dimethyl ammonium chloride)/poly(styrene sulfonate sodium salt) (PDADMAC/PSS) is presented. The layer-by-layer growth was carried out by dipping silica substrates in oligoelectrolyte solutions and was modeled by means of atomistic molecular dynamics simulations with a protocol that mimics the experimental procedure up to the assembly of four layers. Measurements of OEM thickness, surface roughness and amount of adsorbed oligoelectrolyte chains obtained from both approaches are compared. A good agreement between simulated and experimental results was found, with some deviations due to intrinsic limitations of both methods. However, the combination of information extracted from simulations to support the analysis of experimental data can overcome such restrictions and improve the interpretation of experimental results. On the other hand, processes dominated by slower kinetics, like the destabilization of adsorbed layers upon equilibration with the surrounding environment, are out of reach for the simulation modeling approach, but they can be investigated by monitoring in situ the oligoelectrolyte adsorption during the assembly process. This demonstrates how the synergistic use of simulation and experiments improves the knowledge of OEM properties down to the molecular scale

Aggregation number distributions and mesoglobules in dilute solutions of diblock and triblock copolymers

We investigate the aggregation number and size distributions for inter-molecular clusters of amphiphilic diblock and triblock copolymers in poor solvent at very low concentrations. Diblocks and triblocks with hydrophilic ends are shown to possess narrow distributions corresponding to formation of monodispersed mesoglobules. Diblocks with hydrophobic ends are found to produce inter-cluster multimers due to bridging by the hydrophilic middle blocks, resulting in polydisperse distributions. Implications of these observations for preparation of monodispersed nanoparticles and, potentially, understanding of the quaternary structure of proteins are discussed.Comment: 4 pages, 4 PS figures. Accepted for publication in EP

One-step RAFT synthesis of well-defined amphiphilic star polymers and their self-assembly in aqueous solution

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.Multifunctional chain transfer agents for RAFT polymerisation were designed for the one-step synthesis of amphiphilic star polymers. Thus, hydrophobically end-capped 3- and 4-arm star polymers, as well as linear ones for reference, were made of the hydrophilic monomer N,N-dimethylacrylamide (DMA) in high yield with molar masses up to 150 000 g mol−1, narrow molar mass distribution (PDI ≤ 1.2) and high end group functionality (∼90%). The associative telechelic polymers form transient networks of interconnected aggregates in aqueous solution, thus acting as efficient viscosity enhancers and rheology modifiers, eventually forming hydrogels. The combination of dynamic light scattering (DLS), small angle neutron scattering (SANS) and rheology experiments revealed that several molecular parameters control the structure and therefore the physical properties of the aggregates. In addition to the size of the hydrophilic block (maximum length for connection) and the length of the hydrophobic alkyl chain ends (stickiness), the number of arms (functionality) proved to be a key parameter.EC/FP7/226507/EU/Integrated Infrastructure Initiative for Neutron Scattering and Muon Spectroscopy/NMI

Short versus long chain polyelectrolyte multilayers: a direct comparison of self-assembly and structural properties

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.Successful layer-by-layer (LbL) growth of short chain (∼30 repeat units per chain) poly(sodium styrene sulfonate) (PSS)–poly(diallyl dimethylammonium chloride) (PDADMAC) multilayers is presented for the first time and compared with the growth of equivalent long chain polyelectrolyte multilayers (PEMs). A detailed study performed by quartz crystal microbalance with dissipation (QCM-D) is carried out and three main processes are identified: (i) initial mass uptake, (ii) adsorption–desorption during layer equilibration and (iii) desorption during rinsing. In contrast to the high stability and strong layer increment of high molecular weight (HMW) PEMs, layer degradation characterizes low molecular weight (LMW) multilayers. In particular, two different instability phenomena are observed: a constant decrease of sensed mass during equilibration after PDADMAC adsorption, and a strong mass loss by salt-free rinsing after PSS adsorption. Yet, an increase of salt concentration leads to much stronger layer growth. First, when the rinsing medium is changed from pure water to 0.1 M NaCl, the mass loss during rinsing is reduced, irrespective of molecular weight. Second, an increase in salt concentration in the LMW PE solutions causes a larger increment during the initial adsorption step, with no effect on the rinsing. Finally, the mechanical properties of the two systems are extracted from the measured frequency and dissipation shifts, as they offer a deeper insight into the multilayer structures depending on chain length and outermost layer. The paper enriches the field of PE assembly by presenting the use of very short PE chains to form multilayers and elucidates the role of preparation conditions to overcome the limitation of layer stability.DFG, SPP 1369, Polymer-Festkörper-Kontakte: Grenzflächen und Interphase

Structure-related differences in the temperature-regulated fluorescence response of LCST type polymers

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.We demonstrate new fluorophore-labelled materials based on acrylamide and on oligo(ethylene glycol) (OEG) bearing thermoresponsive polymers for sensing purposes and investigate their thermally induced solubility transitions. It is found that the emission properties of the polarity-sensitive (solvatochromic) naphthalimide derivative attached to three different thermoresponsive polymers are highly specific to the exact chemical structure of the macromolecule. While the dye emits very weakly below the LCST when incorporated into poly(N-isopropylacrylamide) (pNIPAm) or into a polyacrylate backbone bearing only short OEG side chains, it is strongly emissive in polymethacrylates with longer OEG side chains. Heating of the aqueous solutions above their cloud point provokes an abrupt increase of the fluorescence intensity of the labelled pNIPAm, whereas the emission properties of the dye are rather unaffected as OEG-based polyacrylates and methacrylates undergo phase transition. Correlated with laser light scattering studies, these findings are ascribed to the different degrees of pre-aggregation of the chains at low temperatures and to the extent of dehydration that the phase transition evokes. It is concluded that although the temperature-triggered changes in the macroscopic absorption characteristics, related to large-scale alterations of the polymer chain conformation and aggregation, are well detectable and similar for these LCST-type polymers, the micro-environment provided to the dye within each polymer network differs substantially. Considering sensing applications, this finding is of great importance since the temperature-regulated fluorescence response of the polymer depends more on the macromolecular architecture than the type of reporter fluorophore.BMBF, 03IS2201B, Spitzenforschung und Innovation in den Neuen Ländern - Das Taschentuchlabor: Impulszentrum für Integrierte Bioanalyse (IZIB

Sultones and Sultines via a Julia-Kocienski Reaction of Epoxides

We thank the EPSRC/Syngenta for a CASE Ph.D. Studentship (to G.M.T.S. under grant EP/J50029X/1), the EPSRC UK National Mass Spectrometry Facility at Swansea University and the EPSRC UK National Crystallography Service Facility at Southampton University.37 We are indebted to Andrew Plant and Janice Black (Syngenta) for the initial suggestion of using the combination of LiN(SiMe3)2/CH2Cl2 and Matthew Reid (Syngenta) for NMR assistance

Polymeric drift control adjuvants for agricultural spraying

The movement of a pesticide or herbicide to an off-target site during agricultural spraying can cause injury to wildlife, plants and contamination of surface water. This phenomenon is known as spray drift and can be controlled by spraying during favorable environmental conditions, and by using low drift nozzles and drift control adjuvants (DCAs). Polymeric DCAs are the most common type of DCA and function by increasing the droplet size produced during spraying. There are, however, two main drawbacks of polymeric DCAs; they are prone to mechanical degradation during spraying which reduces their performance and they can produce oversized drops which reduces the efficacy of the spray. In this trend article, existing DCA technology is reviewed including the mechanism through which they function. This then provides a platform for the discussion of novel polymeric architectures which have currently not been applied in DCA formulations

Dynamics of microemulsions bridged with hydrophobically end-capped star polymers studied by neutron spin-echo

This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in J. Chem. Phys. 140, 034902 (2014) and may be found at https://doi.org/10.1063/1.4861894.The mesoscopic dynamical properties of oil-in-water microemulsions (MEs) bridged with telechelic polymers of different number of arms and with different lengths of hydrophobic stickers were studied with neutron spin-echo (NSE) probing the dynamics in the size range of individual ME droplets. These results then were compared to those of dynamicic light scattering (DLS) which allow to investigate the dynamics on a much larger length scale. Studies were performed as a function of the polymer concentration, number of polymer arms, and length of the hydrophobic end-group. In general it is observed that the polymer bridging has a rather small influence on the local dynamics, despite the fact that the polymer addition leads to an increase of viscosity by several orders of magnitude. In contrast to results from rheology and DLS, where the dynamics on much larger length and time scales are observed, NSE shows that the linear polymer is more efficient in arresting the motion of individual ME droplets. This finding can be explained by a simple simulation, merely by the fact that the interconnection of droplets becomes more efficient with a decreasing number of arms. This means that the dynamics observed on the short and on the longer length scale depend in an opposite way on the number of arms and hydrophobic stickers.BMBF, 05K10KT1, Verbundprojekt NanoSOFT: Teilprojekt 2: Neutronen Spin-Echo Experimente zur Untersuchung komplexer Soft-Matter Systeme mit extremer Präzissio

Effect of Poly(Oxanorbonene)- and Poly(Methacrylate)-Based Polyzwitterionic Surface Coatings on Cell Adhesion and Gene Expression of Human Keratinocytes

Polyzwitterions are generally known for their anti-adhesive properties, including resistance to protein and cell adhesion, and overall high bio-inertness. Yet there are a few polyzwitterions to which mammalian cells do adhere. To understand the structural features of this behavior, a panel of polyzwitterions with different functional groups and overall degrees of hydrophobicity is analyzed here, and their physical and biological properties are correlated to these structural differences. Cell adhesion is focused on, which is the basic requirement for cell viability, proliferation, and growth. With the here presented polyzwitterion panel, three different types of cell-surface interactions are observed: adhesion, slight attachment, and cell repellency. Using immunofluorescence methods, it is found that human keratinocytes (HaCaT) form focal adhesions on the cell-adhesive polyzwitterions, but not on the sample that has only slight cell attachment. Gene expression analysis indicates that HaCaT cells cultivated in the presence of a non-adhesive polyzwitterion have up-regulated inflammatory and apoptosis-related cell signaling pathways, while the gene expression of HaCaT cells grown on a cell-adhesive polyzwitterion does not differ from the gene expression of the growth control, and thus can be defined as fully cell-compatible

Influence of the surfactant degree of oligomerization on the formation of cyclodextrin: surfactant inclusion complexes

Supramolecular complexation is an attractive strategy to modulate the performance of surfactants, e.g., by host-guest interactions. Here, we investigate the interaction of single-chained, di-, tri-, and tetrameric cationic surfactants with cyclodextrins by conductivity and 1H NMR measurements, exploring the effect of increasing the number of the surfactant hydrophobic tails on the stability of cyclodextrin:surfactant inclusion complexes. The stoichiometry and the binding equilibrium constants of the different inclusion complexes were elucidated. Under the working conditions, the number of hydrophobic chains was found not to affect stoichiometry and 1:1 inclusion complexes were formed for all the surfactants investigated. The stability of the host-guest complexes decreases from single-chained to dimeric (“gemini”) surfactants, the binding following a non-cooperative mechanism. This result may be rationalized by taking into account steric constraints and electrostatic effects as well as the need to overcome the hydrophobic interactions between the chains of the same surfactant molecule. However, a further increase in the number of hydrophobic tails, from two to three to four, results in an increase in the equilibrium binding constant, K1. In this case, an increment in the number of chains capable of interaction with the cyclodextrin molecules seems to be the main factor responsible for the increase in K1. ROESY spectra show the coexistence of different types of 1:1 host-guest complexes for tri- and tetrameric surfactants.Consejería de Innovación, Ciencia y Empresa de la Junta de Andalucía P12-FQM- 1105, FQM-274 y FQM-206University of Seville 2017/1004FEDER fund