Improved Approximation Algorithms for Computing k Disjoint Paths Subject to Two Constraints

For a given graph $G$ with positive integral cost and delay on edges, distinct vertices $s$ and $t$, cost bound $C\in Z^{+}$ and delay bound $D\in Z^{+}$, the $k$ bi-constraint path ($k$BCP) problem is to compute $k$ disjoint $st$-paths subject to $C$ and $D$. This problem is known NP-hard, even when $k=1$ \cite{garey1979computers}. This paper first gives a simple approximation algorithm with factor-$(2,2)$, i.e. the algorithm computes a solution with delay and cost bounded by $2*D$ and $2*C$ respectively. Later, a novel improved approximation algorithm with ratio $(1+\beta,\,\max\{2,\,1+\ln\frac{1}{\beta}\})$ is developed by constructing interesting auxiliary graphs and employing the cycle cancellation method. As a consequence, we can obtain a factor-$(1.369,\,2)$ approximation algorithm by setting $1+\ln\frac{1}{\beta}=2$ and a factor-$(1.567,\,1.567)$ algorithm by setting $1+\beta=1+\ln\frac{1}{\beta}$. Besides, by setting $\beta=0$, an approximation algorithm with ratio $(1,\, O(\ln n))$, i.e. an algorithm with only a single factor ratio $O(\ln n)$ on cost, can be immediately obtained. To the best of our knowledge, this is the first non-trivial approximation algorithm for the $k$BCP problem that strictly obeys the delay constraint.Comment: 12 page

Heat flow method to Lichnerowicz type equation on closed manifolds

In this paper, we establish existence results for positive solutions to the Lichnerowicz equation of the following type in closed manifolds -\Delta u=A(x)u^{-p}-B(x)u^{q},\quad in\quad M, where $p>1, q>0$, and $A(x)>0$, $B(x)\geq0$ are given smooth functions. Our analysis is based on the global existence of positive solutions to the following heat equation {ll} u_t-\Delta u=A(x)u^{-p}-B(x)u^{q},\quad in\quad M\times\mathbb{R}^{+}, u(x,0)=u_0,\quad in\quad M with the positive smooth initial data $u_0$.Comment: 10 page

An island based hybrid evolutionary algorithm for optimization

This is a post-print version of the article - Copyright @ 2008 Springer-VerlagEvolutionary computation has become an important problem solving methodology among the set of search and optimization techniques. Recently, more and more different evolutionary techniques have been developed, especially hybrid evolutionary algorithms. This paper proposes an island based hybrid evolutionary algorithm (IHEA) for optimization, which is based on Particle swarm optimization (PSO), Fast Evolutionary Programming (FEP), and Estimation of Distribution Algorithm (EDA). Within IHEA, an island model is designed to cooperatively search for the global optima in search space. By combining the strengths of the three component algorithms, IHEA greatly improves the optimization performance of the three basic algorithms. Experimental results demonstrate that IHEA outperforms all the three component algorithms on the test problems.This work was supported by the Engineering and Physical Sciences Research Council (EPSRC) of UK under Grant EP/E060722/1

A higher order control volume based finite element method to prodict the deformation of heterogeneous materials

Materials with obvious internal structure can exhibit behaviour, under loading, that cannot be described by classical elasticity. It is therefore important to develop computational tools incorporating appropriate constitutive theories that can capture their unconventional behaviour. One such theory is micropolar elasticity. This paper presents a linear strain control volume finite element formulation incorporating micropolar elasticity. Verification results from a micropolar element patch test as well as convergence results for a stress concentration problem are included. The element will be shown to pass the patch test and also exhibit accuracy that is at least equivalent to its finite element counterpart

On fiber dispersion models: exclusion of compressed fibers and spurious model comparisons

Fiber dispersion in collagenous soft tissues has an important influence on the mechanical response, and the modeling of the collagen fiber architecture and its mechanics has developed significantly over the last few years. The purpose of this paper is twofold, first to develop a method for excluding compressed fibers within a dispersion for the generalized structure tensor (GST) model, which several times in the literature has been claimed not to be possible, and second to draw attention to several erroneous and misleading statements in the literature concerning the relative values of the GST and the angular integration (AI) models. For the GST model we develop a rather simple method involving a deformation dependent dispersion parameter that allows the mechanical influence of compressed fibers within a dispersion to be excluded. The theory is illustrated by application to simple extension and simple shear in order to highlight the effect of exclusion. By means of two examples we also show that the GST and the AI models have equivalent predictive power, contrary to some claims in the literature. We conclude that from the theoretical point of view neither of these two models is superior to the other. However, as is well known and as we now emphasize, the GST model has proved to be very successful in modeling the data from experiments on a wide range of tissues, and it is easier to analyze and simpler to implement than the AI approach, and the related computational effort is much lower

Q2Q^2--Dependence of the Gerasimov-Drell-Hearn Sum Rule

We test the Gerasimov-Drell-Hearn (GDH) sum rule numerically by calculating the total photon absorption cross sections $\sigma_{1/2}$ and $\sigma_{3/2}$ on the nucleon via photon excitation of baryon resonances in the constituent quark model. A total of seventeen, low-lying, non-strange baryon resonances are included in this calculation. The transverse and longitudinal interference cross section, $\sigma_{1/2}^{TL}$, is found to play an important role in the study of the $Q^2$ variation of the sum rule. The results show that the GDH sum rule is saturated by these resonances at a confidence level of 94%. In particular, the $P_{33}(1232)$ excitation largely saturates the sum rule at $Q^2 = 0$, and dominates at small $Q^2$. The GDH integral has a strong $Q^2$-dependence below $Q^2= 1.0 {GeV}^2$ and changes its sign around $Q^2= 0.3 {GeV}^2$. It becomes weakly $Q^2$-dependent for $Q^2 > 1.0 {GeV}^2$ because of the quick decline of the resonance contributions. We point out that the $Q^2$ variation of the GDH sum rule is very important for understanding the nucleon spin structure in the non-perturbative QCD region.Comment: revtex, 17 pages, 3 ps figs include

The phase relation between sunspot numbers and soft X-ray flares

To better understand long-term flare activity, we present a statistical study on soft X-ray flares from May 1976 to May 2008. It is found that the smoothed monthly peak fluxes of C-class, M-class, and X-class flares have a very noticeable time lag of 13, 8, and 8 months in cycle 21 respectively with respect to the smoothed monthly sunspot numbers. There is no time lag between the sunspot numbers and M-class flares in cycle 22. However, there is a one-month time lag for C-class flares and a one-month time lead for X-class flares with regard to sunspot numbers in cycle 22. For cycle 23, the smoothed monthly peak fluxes of C-class, M-class, and X-class flares have a very noticeable time lag of one month, 5 months, and 21 months respectively with respect to sunspot numbers. If we take the three types of flares together, the smoothed monthly peak fluxes of soft X-ray flares have a time lag of 9 months in cycle 21, no time lag in cycle 22 and a characteristic time lag of 5 months in cycle 23 with respect to the smoothed monthly sunspot numbers. Furthermore, the correlation coefficients of the smoothed monthly peak fluxes of M-class and X-class flares and the smoothed monthly sunspot numbers are higher in cycle 22 than those in cycles 21 and 23. The correlation coefficients between the three kinds of soft X-ray flares in cycle 22 are higher than those in cycles 21 and 23. These findings may be instructive in predicting C-class, M-class, and X-class flares regarding sunspot numbers in the next cycle and the physical processes of energy storage and dissipation in the corona.Comment: 8 pages, 3 figures, Accepted for publication in Astrophysics & Space Scienc

Integrating fluctuations into distribution of resources in transportation networks

We propose a resource distribution strategy to reduce the average travel time in a transportation network given a fixed generation rate. Suppose that there are essential resources to avoid congestion in the network as well as some extra resources. The strategy distributes the essential resources by the average loads on the vertices and integrates the fluctuations of the instantaneous loads into the distribution of the extra resources. The fluctuations are calculated with the assumption of unlimited resources, where the calculation is incorporated into the calculation of the average loads without adding to the time complexity. Simulation results show that the fluctuation-integrated strategy provides shorter average travel time than a previous distribution strategy while keeping similar robustness. The strategy is especially beneficial when the extra resources are scarce and the network is heterogeneous and lowly loaded.Comment: 14 pages, 4 figure

A coupled optical-thermal-electrical model to predict the performance of hybrid PV/T-CCPC roof-top systems

A crossed compound parabolic concentrator (CCPC) is applied into a photovoltaic/thermal (PV/T) hybrid solar collector, i.e. concentrating PV/T (CPV/T) collector, to develop new hybrid roof-top CPV/T systems. However, to optimise the system configuration and operational parameters as well as to predict their performances, a coupled optical, thermal and electrical model is essential. We establish this model by integrating a number of submodels sourced from literature as well as from our recent work on incidence-dependent optical efficiency, six-parameter electrical model and scaling law for outdoor conditions. With the model, electrical performance and cell temperature are predicted on specific days for the roof-top systems installed in Glasgow, Penryn and Jaen. Results obtained by the proposed model reasonably agree with monitored data and it is also clarified that the systems operate under off-optimal operating condition. Long-term electric performance of the CPV/T systems is estimated as well. In addition, effects of transient terms in heat transfer and diffuse solar irradiance on electric energy are identified and discussed