Differential disease restriction of Moloney and Friend murine leukemia viruses by the mouse Rmcf gene is governed by the viral long terminal repeat.

Neonatal CxD2 (Rmcfr) and Balb/c (Rmcfs) mice inoculated with Moloney murine leukemia virus (M-MuLV) exhibited approximately equivalent time course and pathology for disease. CxD2 mice showed only slightly reduced presence of Moloney mink cell focus-forming virus (M-MCF) provirus as seen by Southern blot analysis compared to Balb/c mice. This lack of restriction for disease and spread of MCF was in sharp contrast to that seen for CxD2 mice inoculated with Friend murine leukemia virus (F-MuLV), where incidence of disease and propagation of MCFs were severely restricted, as previously reported. Inoculation of CxD2 mice with FM-MuLV, a recombinant F-MuLV virus containing M-MuLV LTR sequences (U3 and R), resulted in T cell disease of time course equal to that seen in Balb/c mice; there also was little restriction for propagation of MCFs. This indicated that presence of the M-MuLV long terminal repeat (LTR) was sufficient for propagation of MCFs in CxD2 mice. Differing restriction for F-MuLV vs. M-MuLV in CxD2 mice was explained on the basis of different "MCF propagator cells" for the two viruses. It was suggested that cells propagating F-MCF (e.g., erythroid progenitors) are blocked by endogenous MCF-like gp70env protein, whereas cells propagating M-MCF (e.g., lymphoid) do not express this protein on their surface. F-MuLV disease in CxD2 mice was greatly accelerated when neonates were inoculated with a F-MuLV/F-MCF pseudotypic mixture. However, F-MCF provirus was not detectable or only barely detectable in F-MuLV/F-MCF-induced tumors, suggesting that F-MCF acted indirectly in induction of these tumors

Optical property and Stokes' shift of Zn <inf>1-x</inf>Cd <inf>x</inf>O thin films depending on Cd content

Ternary Zn1-x Cdx O films were grown on (0001) sapphire substrates by pulsed laser deposition. The energy band gap of Zn1-x Cdx O films decreases with increasing Cd content. An increase of Cd content also leads to the emission broadening, absorption edge broadening, and crystallinity degradation. The absorption edge and ultraviolet emission energy shift to lower energy from 3.357 eV to 3.295 eV and 3.338 eV to 3.157 eV, respectively, with increasing Cd content from 0.3% to 3% at 4 K. The Stokes' shift between the absorption and emission is observed and that indicates the increase of exciton localization with Cd content. © 2006 American Institute of Physics

Oxidation of Iron under Physiologically Relevant Conditions in Biological Fluids from Healthy and Alzheimer's Disease Subjects

Ferroxidase activity has been reported to be altered in various biological fluids in neurodegenerative disease, but the sources contributing to the altered activity are uncertain. Here we assay fractions of serum and cerebrospinal fluid with a newly validated triplex ferroxidase assay. Our data indicate that while ceruloplasmin, a multicopper ferroxidase, is the predominant source of serum activity, activity in CSF predominantly derives from a <10 kDa component, specifically from polyanions such as citrate and phosphate. We confirm that in human biological samples, ceruloplasmin activity in serum is decreased in Alzheimer's disease, but in CSF a reduction of activity in Alzheimer's disease originates from the polyanion component

Establishing production service system and information collaboration platform for mold and die products

This paper investigates how the new concept of product service systems can be used and extended to transform, elevate, and revitalize traditional equipment manufacturing industry such as the Mold and Die (MD) sector. A mold and die production service systems (MPSS) framework is established based on recent developments within our industrial collaborators. Within the MPSS framework, MD manufacturers become more specialized in producing MD products and components while sharing and outsourcing manufacturing-oriented services (MOS) from a service provider. Typical services include collaborative order pooling and release, collaborative project progress status tracking, contractor-managed collaborative outsourcing, collaborative product design, collaborative production planning and scheduling, and after-sales technical supports. MOSs are designed, developed, and deployed as SaaS (software as application services) following the service-oriented architecture. Collectively, they form iMPSS-an Information and Collaboration Platform that enables MPSS. The use of iMPSS leads to benefits for stakeholders involved in providing mold and die functionality including better shopfloor decisions and reduced IT investments. © 2010 The Author(s).published_or_final_versionSpringer Open Choice, 21 Feb 201

Study on anti-atherosclerotic effect of suxiao jiuxin pill and its mechanism.

Background: Suxiao Jiuxin Pill is composed of Ligusticum wallichii, Borneolum Syntheticum and other drugs; it has qi promoting and blood circulation activating, meridian dredging and pain relieving efficacies. The objective of this paper is to study the effect of Suxiao Jiuxin Pill (quick-acting heart reliever), in atherosclerosis (AS) rat model and explore the mechanism for its prevention and treatment of AS.Materials and Methods: AS rat model was established by high cholesterol diet and single intra-peritoneal injection of increased dose of vitamin D3.Results: Compared with the model group, Suxiao Jiuxin Pill medium- and high-dose groups and atorvastatin group can effectively regulate lipid metabolism.Conclusion: We conclude that Suxiao Jiuxin Pill has a good hypo-lipidemic effect, and can inhibit the occurrence and development of AS.Keywords : Suxiao Jiuxin Pill; atherosclerosis; atorvastati

Study on the anti-cerebral ischemia effect of borneol and its mechanism

Background: Borneol is the processed item from resin of Dryobalanops aromatica Gaertn. f. It can enhance the activity of antioxidant enzymes in brain tissue and reduce inflammatory response by improving the energy metabolism of ischemic brain regions, and thereby reduces brain tissue damage. The objective of this paper was to study the anti-cerebral ischemia effect of borneol and its mechanism.Materials and Methods: The anti-cerebral ischemia effect of borneol was studied by ligation of bilateral common carotid arteries (CCA), and vagus nerves in mice and the acute cerebral ischemia-reperfusion experiment in rats.Results: Compared with the blank and solvent control groups, the borneol low-; medium-; and high-dose groups can significantly prolong the gasping time of mice after decapitation, and extend the survival time of mice after ligation of bilateral CCA, and vagus nerves.Conclusion: Compared with the Xueshuantong injection group, the prolongation of survival time of mice after ligation of bilateral CCA, and vagus nerves was more apparent in the high-dose borneol experimental group; each experimental group can significantly reduce the number of leukocyte infiltration, the number of ICAM-1-positive vessels, as well as the number of TNF-α-positive cells.Conclusion: Borneol has an anti-cerebral ischemia effect.Key words: borneol; cerebral ischemia-reperfusion; IL-1β, TNF-α; ICAM-

Machine-Learning-Assisted Design of a Robust Biomimetic Radiative Cooling Metamaterial

Recently, biomimetic photonic structural materials have significantly improved their radiative cooling performance. However, most research has focused on understanding cooling mechanisms, with limited exploration of sensitive parameter variations. Traditional numerical methods are costly and time-consuming and often struggle to identify optimal solutions, limiting the scope of high-performance microstructure design. To address these challenges, we integrated machine learning into the design of Batocera LineolataHope bionic photonic structures, using SiO2 as the substrate. Deep learning models provided insights into the complex relationship between bionic metamaterials and their spectral response, enabling us to identify the optimal performance parameter range for truncated cone arrays (height-to-diameter ratio (H/D-bottom) from 0.8 to 2.4), achieving a high average emissivity of 0.985. Experimentally, the noon temperature of fabricated samples decreased by about 8.3 degrees C. This data-driven approach accelerates the design and optimization of robust biomimetic radiative cooling metamaterials, promising significant advancements in standardized passive radiative cooling applications

Broadband luminescence in defect-engineered electrochemically produced porous Si/ZnO nanostructures

The fabrication, by an all electrochemical process, of porous Si/ZnO nanostructures with engineered structural defects, leading to strong and broadband deep level emission from ZnO, is presented. Such nanostructures are fabricated by a combination of metal-assisted chemical etching of Si and direct current electrodeposition of ZnO. It makes the whole fabrication process low-cost, compatible with Complementary Metal-Oxide Semiconductor technology, scalable and easily industrialised. The photoluminescence spectra of the porous Si/ZnO nanostructures reveal a correlation between the lineshape, as well as the strength of the emission, with the morphology of the underlying porous Si, that control the induced defects in the ZnO. Appropriate fabrication conditions of the porous Si lead to exceptionally bright Gaussian-type emission that covers almost the entire visible spectrum, indicating that porous Si/ZnO nanostructures could be a cornerstone material towards white-light-emitting devices

An integrated omics analysis reveals molecular mechanisms that are associated with differences in seed oil content between Glycine max and Brassica napus

Abstract Background: Rapeseed (Brassica napus L.) and soybean (Glycine max L.) seeds are rich in both protein and oil, which are major sources of biofuels and nutrition. Although the difference in seed oil content between soybean (~ 20%) and rapeseed (~ 40%) exists, little is known about its underlying molecular mechanism. Results: An integrated omics analysis was performed in soybean, rapeseed, Arabidopsis (Arabidopsis thaliana L. Heynh), and sesame (Sesamum indicum L.), based on Arabidopsis acyl-lipid metabolism- and carbon metabolism-related genes. As a result, candidate genes and their transcription factors and microRNAs, along with phylogenetic analysis and co-expression network analysis of the PEPC gene family, were found to be largely associated with the difference between the two species. First, three soybean genes (Glyma.13G148600, Glyma.13G207900 and Glyma.12G122900) co-expressed with GmPEPC1 are specifically enriched during seed storage protein accumulation stages, while the expression of BnPEPC1 is putatively inhibited by bna-miR169, and two genes BnSTKA and BnCKII are co-expressed with BnPEPC1 and are specifically associated with plant circadian rhythm, which are related to seed oil biosynthesis. Then, in de novo fatty acid synthesis there are rapeseed-specific genes encoding subunits β-CT (BnaC05g37990D) and BCCP1 (BnaA03g06000D) of heterogeneous ACCase, which could interfere with synthesis rate, and β-CT is positively regulated by four transcription factors (BnaA01g37250D, BnaA02g26190D, BnaC01g01040D and BnaC07g21470D). In triglyceride synthesis, GmLPAAT2 is putatively inhibited by three miRNAs (gma-miR171, gma-miR1516 and gma-miR5775). Finally, in rapeseed there was evidence for the expansion of gene families, CALO, OBO and STERO, related to lipid storage, and the contraction of gene families, LOX, LAH and HSI2, related to oil degradation. Conclusions: The molecular mechanisms associated with differences in seed oil content provide the basis for future breeding efforts to improve seed oil content