1,566 research outputs found
Competing Interactions among Supramolecular Structures on Surfaces
A simple model was constructed to describe the polar ordering of
non-centrosymmetric supramolecular aggregates formed by self assembling
triblock rodcoil polymers. The aggregates are modeled as dipoles in a lattice
with an Ising-like penalty associated with reversing the orientation of nearest
neighbor dipoles. The choice of the potentials is based on experimental results
and structural features of the supramolecular objects. For films of finite
thickness, we find a periodic structure along an arbitrary direction
perpendicular to the substrate normal, where the repeat unit is composed of two
equal width domains with dipole up and dipole down configuration. When a short
range interaction between the surface and the dipoles is included the balance
between the up and down dipole domains is broken. Our results suggest that due
to surface effects, films of finite thickness have a none zero macroscopic
polarization, and that the polarization per unit volume appears to be a
function of film thickness.Comment: 3 pages, 3 eps figure
South Atlantic island record reveals a South Atlantic response to the 8.2 kyr event
International audienceOne of the most distinct climate fluctuations during the Holocene is the short and rapid event centred around 8200 years ago, the 8.2 kyr event, which was most likely triggered by glacial melt-water forcing from the receding Laurentide ice-sheet. Evidence for this cooling has primarily been reported from sites around the North Atlantic, but an increasing number of observations imply a more wide-spread occurrence. Palaeoclimate archives from the Southern Hemisphere have hitherto failed to uncover a distinct climatic anomaly associated with the 8.2 kyr event. Here we present a lake sediment record from Nightingale Island in the central South Atlantic showing enhanced precipitation between 8275 and 8025 cal. yrs BP, most likely as a consequence of increased sea surface temperature (SST). We show that this is consistent with climate model projections of a warming of the South Atlantic in response to reduced north-ward energy transport during the 8.2 kyr event
Contrasting growth responses in lamina and petiole during neighbor detection depend on differential auxin responsiveness rather than different auxin levels.
Foliar shade triggers rapid growth of specific structures that facilitate access of the plant to direct sunlight. In leaves of many plant species, this growth response is complex because, although shade triggers the elongation of petioles, it reduces the growth of the lamina. How the same external cue leads to these contrasting growth responses in different parts of the leaf is not understood. Using mutant analysis, pharmacological treatment and gene expression analyses, we investigated the role of PHYTOCHROME INTERACTING FACTOR7 (PIF7) and the growth-promoting hormone auxin in these contrasting leaf growth responses. Both petiole elongation and lamina growth reduction are dependent on PIF7. The induction of auxin production is both necessary and sufficient to induce opposite growth responses in petioles vs lamina. However, these contrasting growth responses are not caused by different auxin concentrations in the two leaf parts. Our work suggests that a transient increase in auxin levels triggers tissue-specific growth responses in different leaf parts. We provide evidence suggesting that this may be caused by the different sensitivity to auxin in the petiole vs the blade and by tissue-specific gene expression
Cell-Type-Specific Cytokinin Distribution within the Arabidopsis Primary Root Apex
Cytokinins (CKs) play a crucial role in many physiological and developmental processes at the levels of individual plant components (cells, tissues, and organs) and by coordinating activities across these parts. High-resolution measurements of intracellular CKs in different plant tissues can therefore provide insights into their metabolism and mode of action. Here, we applied fluorescence-activated cell sorting of green fluorescent protein (GFP)-marked cell types, combined with solid-phase microextraction and an ultra-high-sensitivity mass spectrometry (MS) method for analysis of CK biosynthesis and homeostasis at cellular resolution. This method was validated by series of control experiments, establishing that protoplast isolation and cell sorting procedures did not greatly alter endogenous CK levels. The MS-based method facilitated the quantification of all the well known CK isoprenoid metabolites in four different transgenic Arabidopsis thaliana lines expressing GFP in specific cell populations within the primary root apex. Our results revealed the presence of a CK gradient within the Arabidopsis root tip, with a concentration maximum in the lateral root cap, columella, columella initials, and quiescent center cells. This distribution, when compared with previously published auxin gradients, implies that the well known antagonistic interactions between the two hormone groups are cell type specific
Neural Modeling and Control of Diesel Engine with Pollution Constraints
The paper describes a neural approach for modelling and control of a
turbocharged Diesel engine. A neural model, whose structure is mainly based on
some physical equations describing the engine behaviour, is built for the
rotation speed and the exhaust gas opacity. The model is composed of three
interconnected neural submodels, each of them constituting a nonlinear
multi-input single-output error model. The structural identification and the
parameter estimation from data gathered on a real engine are described. The
neural direct model is then used to determine a neural controller of the
engine, in a specialized training scheme minimising a multivariable criterion.
Simulations show the effect of the pollution constraint weighting on a
trajectory tracking of the engine speed. Neural networks, which are flexible
and parsimonious nonlinear black-box models, with universal approximation
capabilities, can accurately describe or control complex nonlinear systems,
with little a priori theoretical knowledge. The presented work extends optimal
neuro-control to the multivariable case and shows the flexibility of neural
optimisers. Considering the preliminary results, it appears that neural
networks can be used as embedded models for engine control, to satisfy the more
and more restricting pollutant emission legislation. Particularly, they are
able to model nonlinear dynamics and outperform during transients the control
schemes based on static mappings.Comment: 15 page
Investigations of the pi N total cross sections at high energies using new FESR: log nu or (log nu)^2
We propose to use rich informations on pi p total cross sections below N= 10
GeV in addition to high-energy data in order to discriminate whether these
cross sections increase like log nu or (log nu)^2 at high energies, since it is
difficult to discriminate between asymptotic log nu and (log nu)^2 fits from
high-energy data alone. A finite-energy sum rule (FESR) which is derived in the
spirit of the P' sum rule as well as the n=1 moment FESR have been required to
constrain the high-energy parameters. We then searched for the best fit of pi p
total cross sections above 70 GeV in terms of high-energy parameters
constrained by these two FESR. We can show from this analysis that the (log
nu)^2 behaviours is preferred to the log nu behaviours.Comment: to be published in Phys. Rev. D 5 pages, 2 eps figure
Variability in concentrations of potentially toxic elements in urban parks from six European cities
Use of a harmonised sampling regime has allowed comparison of concentrations of copper, chromium, nickel, lead and zinc in six urban parks located in different European cities differing markedly in their climate and industrial history. Wide concentrations ranges were found for copper, lead and zinc at most sites, but for chromium and nickel a wide range was only seen in the Italian park, where levels were also considerably greater than in other soils. As might be expected, the soils from older cities with a legacy of heavy manufacturing industry (Glasgow, Torino) were richest in potentially toxic elements (PTEs); soils from Ljubljana, Sevilla and Uppsala had intermediate metal contents, and soils from the most recently established park, in the least industrialised city (Aveiro), displayed lowest concentrations. When principal component analysis was applied to the data, associations were revealed between pH and organic carbon content; and between all five PTEs. When pH and organic carbon content were excluded from the PCA, a distinction became clear between copper, lead and zinc (the "urban" metals) on the one hand, and chromium and nickel on the other. Similar results were obtained for the surface (0-10 cm depth) and sub-surface (10-20 cm depth) samples. Comparisons with target or limit concentrations were limited by the existence of different legislation in different countries and the fact that few guidelines deal specifically with public-access urban soils intended for recreational use
Registers of the Swedish total population and their use in medical research
The primary aim of the Swedish national population registration system is to
obtain data that (1) reflect the composition, relationship and identities of the
Swedish population and (2) can be used as the basis for correct decisions and
measures by government and other regulatory authorities. For this purpose, Sweden
has established two population registers: (1) The Population Register, maintained
by the Swedish National Tax Agency ("Folkbokforingsregistret"); and (2) The Total
Population Register (TPR) maintained by the government agency Statistics Sweden
("Registret over totalbefolkningen"). The registers contain data on life events
including birth, death, name change, marital status, family relationships and
migration within Sweden as well as to and from other countries. Updates are
transmitted daily from the Tax Agency to the TPR. In this paper we describe the
two population registers and analyse their strengths and weaknesses. Virtually
100 % of births and deaths, 95 % of immigrations and 91 % of emigrations are
reported to the Population Registers within 30 days and with a higher proportion
over time. The over-coverage of the TPR, which is primarily due to underreported
emigration data, has been estimated at up to 0.5 % of the Swedish population.
Through the personal identity number, assigned to all residents staying at least
1 year in Sweden, data from the TPR can be used for medical research purposes,
including family design studies since each individual can be linked to his or her
parents, siblings and offspring. The TPR also allows for identification of
general population controls, participants in cohort studies, as well as
calculation of follow-up time.NonePublishe
Light intensity modulates the regulatory network of the shade avoidance response in Arabidopsis.
Plants such as Arabidopsis thaliana respond to foliar shade and neighbors who may become competitors for light resources by elongation growth to secure access to unfiltered sunlight. Challenges faced during this shade avoidance response (SAR) are different under a light-absorbing canopy and during neighbor detection where light remains abundant. In both situations, elongation growth depends on auxin and transcription factors of the phytochrome interacting factor (PIF) class. Using a computational modeling approach to study the SAR regulatory network, we identify and experimentally validate a previously unidentified role for long hypocotyl in far red 1, a negative regulator of the PIFs. Moreover, we find that during neighbor detection, growth is promoted primarily by the production of auxin. In contrast, in true shade, the system operates with less auxin but with an increased sensitivity to the hormonal signal. Our data suggest that this latter signal is less robust, which may reflect a cost-to-robustness tradeoff, a system trait long recognized by engineers and forming the basis of information theory
Thermal diagnostic of the Optical Window on board LISA Pathfinder
Vacuum conditions inside the LTP Gravitational Reference Sensor must comply
with rather demanding requirements. The Optical Window (OW) is an interface
which seals the vacuum enclosure and, at the same time, lets the laser beam go
through for interferometric Metrology with the test masses. The OW is a
plane-parallel plate clamped in a Titanium flange, and is considerably
sensitive to thermal and stress fluctuations. It is critical for the required
precision measurements, hence its temperature will be carefully monitored in
flight. This paper reports on the results of a series of OW characterisation
laboratory runs, intended to study its response to selected thermal signals, as
well as their fit to numerical models, and the meaning of the latter. We find
that a single pole ARMA transfer function provides a consistent approximation
to the OW response to thermal excitations, and derive a relationship with the
physical processes taking place in the OW. We also show how system noise
reduction can be accomplished by means of that transfer function.Comment: 20 pages, 14 figures; accepted for publication in Class. Quantum Gra
- …
