An overview of laser surface modification of die steels

In recent years, surface modification using advanced heat source like laser has been replacing the conventional methods to produce amorphous microstructure via rapid solidification. Due to the benefits of laser to enhance the tribological and mechanical properties of materials’ surface, several laser surface processing were developed including laser surface modification, namely laser alloying, transformation hardening, surface amorphization, shock hardening and glazing. In high temperature applications, the laser surface modification technique is beneficial to prolong the die life cycle, and also to improve the surface roughness of thermal barrier coatings (TBC). To produce the amorphous layer at a particular depth, laser parameter such as irradiance, frequency, and exposure time are controlled. Variations of parameter may result in modified microhardness properties of heat affected zone and transition zone. Nevertheless, works on laser glazing of bearings, railroad rails and TBC had proven the surface properties were enhanced through laser glazing to cope with excessive load, wear, fatigue, bending and friction demand

Thermal stability of laser treated die material for semi-solid metal forming

This paper presents laser surface modification work performed to improve the lifetime of die materials. Die material AISI H13, with typical hardness in the range of 42 to 48 HRC, offers high wear and corrosion resistance. However the cyclic high temperature conditions along with exposure to high viscosity molten metal in semi-solid forming cause the die to wear and crack with resultant shortened die lifetime. In this study, the thermal stability of die material at elevated temperature was investigated through micro-hardness testing and a metallographic study. AISI H13 samples were laser glazed using CO2 continuous wave mode laser with 10.6 μm wavelength. Samples were attached to a specially designed rotating chuck to enable it to be rotated at speeds up to 1500 rpm and allow flat surface glazing to take place. The micro-hardness was measured for as-glazed samples and annealed samples which were held at temperatures ranging from 550oC to 800oC with 50oC intervals. The metallographic study conducted examined the formation of three zones at different depths which were the glazed zone, the heat affected zone and the substrate. As a result of rapid heating and cooling from the laser glazing process, a metallic glass layer was developed which exhibited an average micro-hardness of 900 HV when exposed to 3.34E+10 W/m2 laser irradiance within a range of 0.0011 to 0.0018 s exposure time. Crystallization in glazed zone increased as the annealing temperature increased. As the annealing temperature reached above approximately 600oC, the micro-hardness decreased to approximately 600 HV (equivalent to approx. 54 HRC) due to local crystallization. These findings show potential direct application of glazed dies for non-ferrous semi-solid forming and the requirement for thermal barrier protection for application at higher temperatures

Automatic eduction and statistical analysis of coherent structures in the wall region of a confine plane

This paper describes a vortex detection algorithm used to expose and statistically characterize the coherent flow patterns observable in the velocity vector fields measured by Particle Image Velocimetry (PIV) in the impingement region of air curtains. The philosophy and the architecture of this algorithm are presented. Its strengths and weaknesses are discussed. The results of a parametrical analysis performed to assess the variability of the response of our algorithm to the 3 user-specified parameters in our eduction scheme are reviewed. The technique is illustrated in the case of a plane turbulent impinging twin-jet with an opening ratio of 10. The corresponding jet Reynolds number, based on the initial mean flow velocity U0 and the jet width e, is 14000. The results of a statistical analysis of the size, shape, spatial distribution and energetic content of the coherent eddy structures detected in the impingement region of this test flow are provided. Although many questions remain open, new insights into the way these structures might form, organize and evolve are given. Relevant results provide an original picture of the plane turbulent impinging jet

Reading ecosystem services at the local scale through a territorial approach: The case of peri-urban agriculture in the thau Lagoon, Southern France

© 2015 by the author(s). In recent years, the ecosystem services (ES) concept has become a major paradigm for natural resource management. While policy-makers demand “hard” monetary evidence that nature conservation would be worth investing in, ongoing attempts are being made to formalize the concept as a scientifically robust “one size fits all” analytical framework. These attempts have highlighted several major limitations of the ES concept. First, to date, the concept has paid little attention to the role of humans in the production of ES. Second, the ongoing formalization of the ES concept is turning it into a “technology of globalization,” thereby increasingly ignoring the socio-cultural context and history within which ecosystems emerge. Third, economic valuation has been shown to limit local stakeholders in expressing their daily and immediate ways of interacting with their environment over and beyond extrinsic motivation provided by financial gains. We address these three limitations by analyzing a social evaluation of the roles of peri-urban farmland from a territorial perspective. Our case study is the Thau lagoon in southern France. We conducted in-depth interviews with a broad range of stakeholders and ran two participatory workshops. Using a territorial meta-model that distinguishes three levels— physical, logical, and existential—stakeholder data were analyzed to unravel the interplay of territorial elements at these three levels that gives rise to ES in two broad categories: food production and aesthetic landscape. The coupling of ES and territory concepts opens up several novel analytical perspectives. It allows partitioning of ES in a manner that “re-contextualizes” them and gives insight about both their physical constituents and their meaning at the territorial level. Additional research should incorporate the dynamics of service demand and supply, and further investigate options for implementation

Effect of nearest neighbor repulsion on the low frequency phase diagram of a quarter-filled Hubbard-Holstein chain

We have studied the influence of nearest-neighbor (NN) repulsion on the low frequency phase diagram of a quarter-filled Hubbard-Holstein chain. The NN repulsion term induces the apparition of two new long range ordered phases (one $4k_F$ CDW for positive $U_{eff} = U-2g^2/\omega$ and one $2k_F$ CDW for negative $U_{eff}$) that did not exist in the V=0 phase diagram. These results are put into perspective with the newly observed charge ordered phases in organic conductors and an interpretation of their origin in terms of electron-molecular vibration coupling is suggested.Comment: 10 pages, 10 figure

Sensors for fruit firmness assessment: Comparision and fusion

Non-destructive measurement of fruit firmness is a difficult problem and many different sensors have been developed in order to achieve this task. Three different European laboratories were associated in collaborative experiments on peaches, to compare three different sensing techniques, namely, sound, impact and micro-deformation. A Bayesian classifier is associated with each individual sensor and provides a classification into three categories, namely “soft”, “half firm” and “firm”. The fusion of the different sensors is performed by using Bayesian classifiers associated with heuristic methods for identity fusion. The result of the identity fusion is compared with the classification provided by an unsupervised algorithm based on destructive measurements. The fusion process provides some improvement in the classification results. For the individual sensors, the error rate of the classification varied from 19 to 28%, but the fusion process reduced this to 14%. Moreover, all measures of agreement between sensors lead to the conclusion that fusing sensors is better than using individual sensor

Skew-Unfolding the Skorokhod Reflection of a Continuous Semimartingale

The Skorokhod reflection of a continuous semimartingale is unfolded, in a possibly skewed manner, into another continuous semimartingale on an enlarged probability space according to the excursion-theoretic methodology of Prokaj (2009). This is done in terms of a skew version of the Tanaka equation, whose properties are studied in some detail. The result is used to construct a system of two diffusive particles with rank-based characteristics and skew-elastic collisions. Unfoldings of conventional reflections are also discussed, as are examples involving skew Brownian Motions and skew Bessel processes.Comment: 20 pages. typos corrected, added a remark after Proposition 2.3, simplified the last part of Example 2.

ExTrA: Exoplanets in Transit and their Atmospheres

The ExTrA facility, located at La Silla observatory, will consist of a near-infrared multi-object spectrograph fed by three 60-cm telescopes. ExTrA will add the spectroscopic resolution to the traditional differential photometry method. This shall enable the fine correction of color-dependent systematics that would otherwise hinder ground-based observations. With both this novel method and an infrared-enabled efficiency, ExTrA aims to find transiting telluric planets orbiting in the habitable zone of bright nearby M dwarfs. It shall have the versatility to do so by running its own independent survey and also by concurrently following-up on the space candidates unveiled by K2 and TESS. The exoplanets detected by ExTrA will be amenable to atmospheric characterisation with VLTs, JWST, and ELTs and could give our first peek into an exo-life laboratory.Comment: 15 pages, 11 figures, SPIE 201

Compiling Linguistic Constraints into Finite State Automata

International audienceThis paper deals with linguistic constraints encoded in the form of (binary) tables, generally called lexicon-grammar tables. We describe a unified method to compile sets of tables of linguistic constraints into Finite State Automata. This method has been practically implemented in the linguistic platform Unitex

Creep stability of the proposed AIDA mission target 65803 Didymos: I. Discrete cohesionless granular physics model

As the target of the proposed Asteroid Impact & Deflection Assessment (AIDA) mission, the near-Earth binary asteroid 65803 Didymos represents a special class of binary asteroids, those whose primaries are at risk of rotational disruption. To gain a better understanding of these binary systems and to support the AIDA mission, this paper investigates the creep stability of the Didymos primary by representing it as a cohesionless self-gravitating granular aggregate subject to rotational acceleration. To achieve this goal, a soft-sphere discrete element model (SSDEM) capable of simulating granular systems in quasi-static states is implemented and a quasi-static spin-up procedure is carried out. We devise three critical spin limits for the simulated aggregates to indicate their critical states triggered by reshaping and surface shedding, internal structural deformation, and shear failure, respectively. The failure condition and mode, and shear strength of an aggregate can all be inferred from the three critical spin limits. The effects of arrangement and size distribution of constituent particles, bulk density, spin-up path, and interparticle friction are numerically explored. The results show that the shear strength of a spinning self-gravitating aggregate depends strongly on both its internal configuration and material parameters, while its failure mode and mechanism are mainly affected by its internal configuration. Additionally, this study provides some constraints on the possible physical properties of the Didymos primary based on observational data and proposes a plausible formation mechanism for this binary system. With a bulk density consistent with observational uncertainty and close to the maximum density allowed for the asteroid, the Didymos primary in certain configurations can remain geo-statically stable without including cohesion.Comment: 66 pages, 24 figures, submitted to Icarus on 25/Aug/201