Cold-air study of the effect on turbine stator blade aerodynamic performance of coolant ejection from various trailing-edge slot geometries. 1: Experimental results

Trailing-edge slot configurations were investigated in a two-dimensional cascade of turbine stator blades. The trailing-edge slots were incorporated into blades with round trailing edges. The five blade configurations investigated included blades with two different trailing-edge thicknesses and four different slot widths. The results of the investigation showed that there was, in general, a significant increase in primary-air efficiency due to the coolant flow, the increase varying with slot configuration. For the five configurations tested, the average percent change in primary-air efficiency per percent coolant flow varied almost linearly from zero to about 1.4 percent over a range of coolant- to primary-air exit-velocity ratios between 0 and 1.2. However, for different configurations there was considerable deviation from the average values in the lower range of exit velocity ratios

Two-dimensional cold-air cascade study of a film-cooled turbine stator blade. 1: Experimental results of pressure-surface film cooling tests

The effect of film coolant ejection from the pressure side of a stator blade was determined in a two-dimensional cascade. Stator exit surveys were made for each of six rows of coolant holes. Successive multirow tests were made with two, three, four, five, and six rows of coolant holes open. The results of the multirow tests are compared with the predicted multirow performance obtained by adding the single-row data. Results are presented in terms of stator primary-air efficiency as a function of coolant fraction

Effect of trailing edge geometry and thickness on the performance of certain turbine stator blading

The experimental and analytical investigation included solid blades with five different trailing-edge thicknesses and four different trailing-edge geometries. One of the geometries was round, one was square, one was tapered from the suction surface, and the other tapered from the pressure surface. One of the trailing-edge thicknesses was sharp edged; the other four thicknesses were equivalent to about 5, 11, 16, and 20 percent of the blade throat width. The experimental results show increased efficiency loss for increased trailing-edge thickness for all trailing-edge geometries. The blade with round trailing edge, equal to about 11 percent of the blade throat width, had 60 percent more loss than the sharp-edged blade. For the same trailing-edge thickness, square trailing edges caused more loss than round trailing edges, and the tapered trailing edges caused about the same loss as the round trailing edges

Approach for Predicting Production Scenarios Focused on Cross Impact Analysis

AbstractOne of the most consistent challenges in business is anticipating what the future holds and what impact it may have on current production systems. The scenario technique is a well-established method for developing and forecasting multiple future development paths for companies. However, this method is mostly employed to develop and to support strategic long-term decisions. The core idea of the approach introduced in this paper is to convey the future impact of today's decisions on production systems to employees involved in production planning processes. With the help of immersive visualization, performed in virtual reality (VR) systems, planning participants can perceive how the factory must adapt to fit future demands.In this paper, the focus is on the fourth phase of the scenario technique – so called scenario development – and, in particular, the cross impact analysis. With this methodology, the interrelations, or cross impacts of the different basic elements are determined. The cross impact analysis results serve as a basis for the development of a standardized tool that can be used to create probable production scenarios out of given production systems. This standardized tool will facilitate the usage of the scenario technique for factory planning projects, as it focuses the immense diversity of future uncertainties companies are faced with on the factory level

Effect of variable stator area on performance of a single-stage turbine suitable for air cooling. 6 - Turbine performance with 70-percent design stator area

Variable stator area effect on performance of single stage turbine suitable for air coolin

Engineering pyruvate decarboxylase-mediated ethanol production in the thermophilic host Geobacillus thermoglucosidasius

This study reports the expression, purification, and kinetic characterization of a pyruvate decarboxylase (PDC) from Gluconobacter oxydans . Kinetic analyses showed the enzyme to have high affinity for pyruvate (120 μM at pH 5), high catalytic efficiency (4.75×105 M−1 s−1 at pH 5), a pHopt of approximately 4.5 and an in vitro temperature optimum at approximately 55 °C. Due to in vitro thermostablity (approximately 40 % enzyme activity retained after 30 min at 65 °C), this PDC was considered to be a suitable candidate for heterologous expression in the thermophile Geobacillus thermoglucosidasius for ethanol production. Initial studies using a variety of methods failed to detect activity at any growth temperature (45–55 °C). However, the application of codon harmonization (i.e., mimicry of the heterogeneous host’s transcription and translational rhythm) yielded a protein that was fully functional in the thermophilic strain at 45 °C (as determined by enzyme activity, Western blot, mRNA detection, and ethanol productivity). Here, we describe the first successful expression of PDC in a true thermophile. Yields as high as 0.35±0.04 g/g ethanol per gram of glucose consumed were detected, highly competitive to those reported in ethanologenic thermophilic mutants. Although activities could not be detected at temperatures approaching the growth optimum for the strain, this study highlights the possibility that previously unsuccessful expression of pdcs in Geobacillus spp. may be the result of ineffective transcription/translation coupling.Web of Scienc

Acetic Acid Bacteria: Physiology and Carbon Sources Oxidation

Acetic acid bacteria (AAB) are obligately aerobic bacteria within the family Acetobacteraceae, widespread in sugary, acidic and alcoholic niches. They are known for their ability to partially oxidise a variety of carbohydrates and to release the corresponding metabolites (aldehydes, ketones and organic acids) into the media. Since a long time they are used to perform specific oxidation reactions through processes called “oxidative fermentations”, especially in vinegar production. In the last decades physiology of AAB have been widely studied because of their role in food production, where they act as beneficial or spoiling organisms, and in biotechnological industry, where their oxidation machinery is exploited to produce a number of compounds such as l-ascorbic acid, dihydroxyacetone, gluconic acid and cellulose. The present review aims to provide an overview of AAB physiology focusing carbon sources oxidation and main products of their metabolism

Risk factor-based screening compared to universal screening for gestational diabetes mellitus in marginalized Burman and Karen populations on the Thailand-Myanmar border: an observational cohort

Background: Gestational diabetes mellitus (GDM) contributes significantly to maternal and neonatal morbidity, but data from marginalized populations remains scarce. This study aims to compare risk-factor-based screening to universal testing for GDM among migrants along the Thailand-Myanmar border. Methods: From the prospective cohort (September 2016, February 2019), 374 healthy pregnant women completed a 75g oral glucose tolerance test (OGTT) at 24-32 weeks gestation. Fasting, one hour and two hour cut-offs were based on Hyperglycaemia and Adverse Pregnancy Outcomes (HAPO trial) criteria and cases were treated. The sensitivity and specificity of risk-factor-based screening criteria was calculated using OGTT as the gold standard. Risk factors included at least one positive finding among 10 criteria, e.g., obesity (body mass index (BMI) >/=27.5kg/m (2)), 1 (st) degree relative with diabetes etc. Adverse maternal and neonatal outcomes were compared by GDM status, and risk factors for GDM were explored. Results: GDM prevalence was 13.4% (50/374) (95% CI: 10.3-17.2). Risk-factors alone correctly identified 74.0% (37/50) OGTT positive cases: sensitivity 74.0% (59.7-85.4) and specificity 27.8% (3.0-33.0). Burman women accounted for 29.1% of the cohort population, but 38.0% of GDM cases. Percentiles for birthweight (p=0.004), head circumference (p=0.005), and weight-length ratio (p=0.010) were higher in newborns of GDM mothers compared with non-GDM, yet 21.7% (75/346) of newborns in the cohort were small-for-gestational age. In Burman women, overweight/obese BMI was associated with a significantly increased adjusted odds ratio 5.03 (95% CI: 1.43-17.64) for GDM compared to normal weight, whereas underweight and overweight/obese in Karen women were both associated with similarly elevated adjusted odds, approximately 2.4-fold (non-significant) for GDM. GDM diagnosis by OGTT was highest prior to peak rainfall. Conclusions: Risk-factor-based screening was not sufficiently sensitive or specific to be useful to diagnose GDM in this setting among a cohort of low-risk pregnant women. A two-step universal screening program has thus been implemented

Health workforce needs in Malawi:analysis of the Thanzi La Onse integrated epidemiological model of care

BACKGROUND: To make the best use of health resources, it is crucial to understand the healthcare needs of a population-including how needs will evolve and respond to changing epidemiological context and patient behaviour-and how this compares to the capabilities to deliver healthcare with the existing workforce. Existing approaches to planning either rely on using observed healthcare demand from a fixed historical period or using models to estimate healthcare needs within a narrow domain (e.g., a specific disease area or health programme). A new data-grounded modelling method is proposed by which healthcare needs and the capabilities of the healthcare workforce can be compared and analysed under a range of scenarios: in particular, when there is much greater propensity for healthcare seeking. METHODS: A model representation of the healthcare workforce, one that formalises how the time of the different cadres is drawn into the provision of units of healthcare, was integrated with an individual-based epidemiological model-the Thanzi La Onse model-that represents mechanistically the development of disease and ill-health and patients' healthcare seeking behaviour. The model was applied in Malawi using routinely available data and the estimates of the volume of health service delivered were tested against officially recorded data. Model estimates of the "time needed" and "time available" for each cadre were compared under different assumptions for whether vacant (or established) posts are filled and healthcare seeking behaviour. RESULTS: The model estimates of volume of each type of service delivered were in good agreement with the available data. The "time needed" for the healthcare workforce greatly exceeded the "time available" (overall by 1.82-fold), especially for pharmacists (6.37-fold) and clinicians (2.83-fold). This discrepancy would be largely mitigated if all vacant posts were filled, but the large discrepancy would remain for pharmacists (2.49-fold). However, if all of those becoming ill did seek care immediately, the "time needed" would increase dramatically and exceed "time supply" (2.11-fold for nurses and midwives, 5.60-fold for clinicians, 9.98-fold for pharmacists) even when there were no vacant positions. CONCLUSIONS: The results suggest that services are being delivered in less time on average than they should be, or that healthcare workers are working more time than contracted, or a combination of the two. Moreover, the analysis shows that the healthcare system could become overwhelmed if patients were more likely to seek care. It is not yet known what the health consequences of such changes would be but this new model provides-for the first time-a means to examine such questions

Leukodystrophies: a proposed classification system based on pathological changes and pathogenetic mechanisms

Leukodystrophies are genetically determined disorders characterized by the selective involvement of the central nervous system white matter. Onset may be at any age, from prenatal life to senescence. Many leukodystrophies are degenerative in nature, but some only impair white matter function. The clinical course is mostly progressive, but may also be static or even improving with time. Progressive leukodystrophies are often fatal, and no curative treatment is known. The last decade has witnessed a tremendous increase in the number of defined leukodystrophies also owing to a diagnostic approach combining magnetic resonance imaging pattern recognition and next generation sequencing. Knowledge on white matter physiology and pathology has also dramatically built up. This led to the recognition that only few leukodystrophies are due to mutations in myelin- or oligodendrocyte-specific genes, and many are rather caused by defects in other white matter structural components, including astrocytes, microglia, axons and blood vessels. We here propose a novel classification of leukodystrophies that takes into account the primary involvement of any white matter component. Categories in this classification are the myelin disorders due to a primary defect in oligodendrocytes or myelin (hypomyelinating and demyelinating leukodystrophies, leukodystrophies with myelin vacuolization); astrocytopathies; leuko-axonopathies; microgliopathies; and leuko-vasculopathies. Following this classification, we illustrate the neuropathology and disease mechanisms of some leukodystrophies taken as example for each category. Some leukodystrophies fall into more than one category. Given the complex molecular and cellular interplay underlying white matter pathology, recognition of the cellular pathology behind a disease becomes crucial in addressing possible treatment strategies