Ground-based photometry of comets in the spectral interval 3000 to 3500 angstrom

Abundances and production rates of CN, C3, and C2 for fifteen comets were determined and the variation of these parameters with helicentric distance for two comets were monitored. While these measurements provide much information about the similarities and differences among comets, only a small fraction of the total material in any of the comets observed was sampled

Experimental study of noise reduction for an unstiffened cylindrical model of an airplane fuselage

Noise reduction measurements were made for a simplified model of an airplane fuselage consisting of an unstiffened aluminum cylinder 0.5 m in diameter by 1.2 m long with a 1.6-mm-thick wall. Noise reduction was first measured with a reverberant field pink-noise load on the cylinder exterior. Next, noise reduction was measured by using a propeller to provide a more realistic noise load on the cylinder. Structural resonance frequencies and acoustic reverberation times for the cylinder interior volume were also measured. Comparison of data from the relatively simple test using reverberant-field noise with data from the more complex propeller-noise tests indicates some similarity in both the overall noise reduction and the spectral distribution. However, all of the test parameters investigated (propeller speed, blade pitch, and tip clearance) had some effect on the noise-reduction spectra. Thus, the amount of noise reduction achieved appears to be somewhat dependent upon the spectral and spatial characteristics of the flight conditions. Information is also presented on cyclinder resonance frequencies, damping, and characteristics of propeller-noise loads

Computational experience with a three-dimensional rotary engine combustion model

A new computer code was developed to analyze the chemically reactive flow and spray combustion processes occurring inside a stratified-charge rotary engine. Mathematical and numerical details of the new code were recently described by the present authors. The results are presented of limited, initial computational trials as a first step in a long-term assessment/validation process. The engine configuration studied was chosen to approximate existing rotary engine flow visualization and hot firing test rigs. Typical results include: (1) pressure and temperature histories, (2) torque generated by the nonuniform pressure distribution within the chamber, (3) energy release rates, and (4) various flow-related phenomena. These are discussed and compared with other predictions reported in the literature. The adequacy or need for improvement in the spray/combustion models and the need for incorporating an appropriate turbulence model are also discussed

Conceptual design, evaluation and research identification for Remote Augmented Propulsive Lift Systems (RALS) with ejectors for VTOL aircraft

Ejector concepts for use with a remote augmented lift system (RALS) exhaust nozzle were studied. A number of concepts were considered and three were selected as having the greatest promise of providing the desired aircraft and exhaust gas cooling and lift enhancement. A scale model test program is recommended to explore the effects of the more important parameters on ejector performance

Geometric efficiency of an electroformed nickel solar concentrator

Geometric efficiency of electroformed paraboloidal nickel solar energy concentrator calculated from optical ray trace dat

The classification and management of limestone pavements - an endangered habitat

This thesis describes an in-depth study of limestone pavements across North West England and North Wales. The aim was to combine elements of geodiversity and biodiversity in order to create a holistic limestone pavement classification to inform future management. A field-based research protocol was used to assess a stratified random sample (46 pavements), accounting for approximately 10% of the limestone pavements in the geographical area. Detailed analyses of key elements are presented, along with important issues that continue to pose threats to this Annex One Priority Habitat. This research resulted in a comprehensive classification, using TWINSPAN analysis and Nonmetric Multidimensional Scaling, identifying six distinct holistic functional groups. The prime factors driving limestone pavement morphology, and hence the classification, were established to be lithology, proximity to structural fault, altitude and human intervention, particularly in terms of grazing intensity. Three upland, open limestone pavement classes were formed. Of these, the richest in terms of geodiversity and biodiversity was the group with the thickest bedding planes and hence the deepest grikes, typically greater than 1m. The class that was most species-poor was "at the highest altitude (above 450m), formed on the thin limestones of the Yoredales. These were characterised by shallow, wide grikes. The third upland limestone pavement group had mid-range grikes, generally 0.5-1m in depth, and small clints. Two wooded classes were identified. One was a lowland 'classic' wooded limestone pavement group with deep, narrow grikes and shallow soils. Indicator species included Juniperus communis and Taxus baccata. The second wooded group was situated proximal to a major structural fault. In this group the pavement dip ranged between 10°-40° with well-runnelled clints that were heavily moss-covered. The sixth group was low altitude, proximal to the coast, characterised by low moss growth, un-vegetated clints and the presence of Ulex europaeus. Conservation management was identified as key to the quality of the limestone pavement habitat and this thesis identifies best management practises and links these to the holistic limestone pavement classification. Finally, as a sample case study, this thesis presents mollusc species and diversity from eleven of the Yorkshire limestone pavements. Analysis establishes significant links between geodiversity and mollusc populations, with key drivers for mollusc communities echoing those of plant species on limestone pavement.Funded by the Yorkshire Dales National Park and the University of Chester

Scales for co-compact embeddings of virtually free groups

Let $\Gamma$ be a group which is virtually free of rank at least 2 and let $\mathcal{F}_{td}(\Gamma)$ be the family of totally disconnected, locally compact groups containing $\Gamma$ as a co-compact lattice. We prove that the values of the scale function with respect to groups in $\mathcal{F}_{td}(\Gamma)$ evaluated on the subset $\Gamma$ have only finitely many prime divisors. This can be thought of as a uniform property of the family $\mathcal{F}_{td}(\Gamma)$.Comment: 12 pages; key words: uniform lattice, virtually free group, totally disconnected group, scale function (Error in references corrected in version 2