Photoelectron diffraction: from phenomenological demonstration to practical tool

The potential of photoelectron diffraction—exploiting the coherent interference of directly-emitted and elastically scattered components of the photoelectron wavefield emitted from a core level of a surface atom to obtain structural information—was first appreciated in the 1970s. The first demonstrations of the effect were published towards the end of that decade, but the method has now entered the mainstream armoury of surface structure determination. This short review has two objectives: First, to outline the way that the idea emerged and the way this evolved in my own collaboration with Neville Smith and his colleagues at Bell Labs in the early years: Second, to provide some insight into the current state-of-the art in application of (scanned-energy mode) photoelectron diffraction to address two key issue in quantitative surface structure determination, namely, complexity and precision. In this regard a particularly powerful aspect of photoelectron diffraction is its elemental and chemical-state specificity

An assessment of the resolution limitation due to radiation-damage in x-ray diffraction microscopy

X-ray diffraction microscopy (XDM) is a new form of x-ray imaging that is being practiced at several third-generation synchrotron-radiation x-ray facilities. Although only five years have elapsed since the technique was first introduced, it has made rapid progress in demonstrating high-resolution threedimensional imaging and promises few-nm resolution with much larger samples than can be imaged in the transmission electron microscope. Both life- and materials-science applications of XDM are intended, and it is expected that the principal limitation to resolution will be radiation damage for life science and the coherent power of available x-ray sources for material science. In this paper we address the question of the role of radiation damage. We use a statistical analysis based on the so-called "dose fractionation theorem" of Hegerl and Hoppe to calculate the dose needed to make an image of a lifescience sample by XDM with a given resolution. We conclude that the needed dose scales with the inverse fourth power of the resolution and present experimental evidence to support this finding. To determine the maximum tolerable dose we have assembled a number of data taken from the literature plus some measurements of our own which cover ranges of resolution that are not well covered by reports in the literature. The tentative conclusion of this study is that XDM should be able to image frozen-hydrated protein samples at a resolution of about 10 nm with "Rose-criterion" image quality.Comment: 9 pages, 4 figure

Soft X-ray spectromicroscopy and its application to semiconductor microstructure characterization

The universal trend towards device miniaturization has driven the semiconductor industry to develop sophisticated and complex instrumentation for the characterization of microstructures. Many significant problems of relevance to the semiconductor industry cannot be solved with conventional analysis techniques, but can be addressed with soft x-ray spectromicroscopy. An active spectromicroscopy program is being developed at the Advanced Light Source, attracting both the semiconductor industry and the materials science academic community. Examples of spectromicroscopy techniques are presented. An ALS {mu}-XPS spectromicroscopy project is discussed, involving the first microscope completely dedicated and designed for microstructure analysis on patterned silicon wafers

A linear motion machine for soft x-ray interferometry

A Fourier Transform X-ray Spectrometer has been designed and built for use at the Advanced light source at Lawrence Berkeley National Laboratory. The design requires a total rectilinear motion of 15 mm with a maximum pitch error of the stage below {+-}0.4 {mu}radians, to achieve this the authors chose to build the entire machine as a single monolithic flexure. A hydraulic driver with sliding O-ring seals was developed with the intention to provide motion with a stick-slip position error of less than 0.8 nm at a uniform velocity of 20 {mu}m/sec. The machine is comprised of two pairs of nested linear motion flexures, all explained by means of a theory published earlier by Hathaway. Certain manufacturing errors were successfully corrected by an extra weak-link feature in the monolith frame. The engineering details of all the subsystems of the linear motion machine are described and measured performance reported

Cianoacrilato na colagem de Bráquetes ortodônticos em resina acrílica: há maior adesão?

Pacientes em tratamento ortodôntico apresentam restaurações provisórias com frequência. No entanto, poucos estudos avaliam a influência dos adesivos na resistência ao cisalhamento dos bráquetes nessas superfícies. A resina acrílica é comumente indicada para colagem de bráquetes, porém o uso do cianoacrilato como adesivo ortodôntico é uma opção analisada. O objetivo do presente trabalho foi avaliar o desempenho do cianoacrilato associado aos materiais comumente utilizados para a fixação de bráquetes metálicos em restaurações provisórias de resina acrílica. Quarenta amostras em resina acrílica foram preparadas e as superfícies homogeinizadas com lixas de carboneto de silício (320 e 600). Em seguida, as amostras foram divididas aleatoriamente em quatro grupos (n=10) com base no tratamento de superfície e agente de união: G1 - bráquetes colados com resina acrílica; G2 - bráquetes colados com resina acrílica e aplicação de cianoacrilato; G3 - bráquetes colados com Transbond(tm) XT; G4 - bráquetes colados com Transbond(tm) XT e aplicação de cianoacrilato. Foram utilizados bráquetes ortodônticos de aço inoxidável, prescrição Roth, Kirium (3M/Abzil) para incisivos centrais superiores direitos, slot 022. Após colagem, as amostras foram submetidas ao teste de cisalhamento a uma velocidade de 0,5mm/min em uma máquina de ensaios universal (EMIC DL-1000). Os dados foram coletados e submetidos à análise estatística pelo teste ANOVA com nível de significância de 5%. A associação de resina acrílica ao cianoacrilato (G2) resultou na maior resistência ao cisalhamento (13,76 MPa), mas não significativa em comparação aos valores obtidos para a resina acrílica (G1= 7,76 MPa). O mesmo pôde ser observado para a associação Transbond(tm) XT e cianoacrilato (G4= 4,03 MPa) em relação a utilização da Transbond(tm) XT de forma isolada (G3= 3,87 MPa) e resina acrílica. O tratamento de superfície tem efeito significativo na resistência da união dos bráquetes colados aos materiais provisórios. A associação de cianoacrilato ao monômero de metilmetacrilato apresentou maior resistência ao cisalhamento, sendo mais indicada clinicamente

PERSPECTIVAS DEL PROCESO DE GLOBALIZACIÓN Y SU INFLUENCIA SOBRE LOS DERECHOS HUMANOS ECONÓMICOS, SOCIALES Y CULTURALES

El escenario internacional se encuentra en constante transformación debido a lo que se ha denominado el proceso de “globalización”. Este afecta las relaciones internaciones interestatales e influye en la vida cotidiana de los individuos. El Derecho Internacional y más específicamente el Derecho Internacional de los Derechos Humanos no es ajeno a este proceso. La investigación afirma que nos encontramos frente a una etapa de transnacionalización de los Derechos Humanos, que permite que los individuos cuenten con mayor protección en ámbitos supranacionales. También hace especial mención a los derechos Económicos Sociales y Culturales, analiza el debate sobre el pluralismo jurídico y la eficacia diferencial. En la metodología empleada se revisan fuentes documentales y se realiza un análisis de algunos derechos particulares previstos en el Pacto de Derechos Económicos, Sociales y Culturales. Los planteamientos permiten afirmar que el proceso de globalización ha determinado la transnacionalización de los Derechos Humanos, surgiendo de dicho fenómeno consecuencias positivas y negativas en cuanto a su cumplimiento

Factors Associated with Revision Surgery after Internal Fixation of Hip Fractures

Background: Femoral neck fractures are associated with high rates of revision surgery after management with internal fixation. Using data from the Fixation using Alternative Implants for the Treatment of Hip fractures (FAITH) trial evaluating methods of internal fixation in patients with femoral neck fractures, we investigated associations between baseline and surgical factors and the need for revision surgery to promote healing, relieve pain, treat infection or improve function over 24 months postsurgery. Additionally, we investigated factors associated with (1) hardware removal and (2) implant exchange from cancellous screws (CS) or sliding hip screw (SHS) to total hip arthroplasty, hemiarthroplasty, or another internal fixation device. Methods: We identified 15 potential factors a priori that may be associated with revision surgery, 7 with hardware removal, and 14 with implant exchange. We used multivariable Cox proportional hazards analyses in our investigation. Results: Factors associated with increased risk of revision surgery included: female sex, [hazard ratio (HR) 1.79, 95% confidence interval (CI) 1.25-2.50; P = 0.001], higher body mass index (fo

Progress and prospects at the national synchrotron light source (NSLS)

This report discusses the NSLS project from inception until the present. The commencement and motivation for the program are considered from the viewpoint of the needs of various experiments and the concepts of the Basic Source is introduced. The Basic Source has high brightness and tunability within the ranges 0 to 0.3 keV and 3 to 20 keV. The inclusion of tunability implies the use of monochromators and the role of these is discussed. The Basic Source is important because it satisfies a very large proportion of users. The strategy of NSLS in providing a good Basic Source and special devices (monochromators and wigglers) to allow coverage of the energy ranges outside those of the Basic Source is described. The response of the NSLS to various other general and special needs of experimental users is described. Turning to the Free Electron Laser Project, a brief description of that device is given followed by a progress report of the overall NSLS construction program. The broad conclusion is that the NSLS facility will be completed within 2 to 3 months of its scheduled timescale and within its budget. This is considered to be a highly successful conclusion to the construction program

Monochromator systems. Lecture 3

General properties of monochromators are discussed, and some useful formulas are given for optical design. Only the Rowland reflection grating, whose groove pattern consists of the intersection of the substrate surface with a set of parallel equispaced planes, is considered. The focusing properties of a toroidal grating are discussed. Some aberrations are briefly described, and quantitative calculations of the aberrations are considered. Dispersion, resolution, and phase space acceptance are discussed. (LEW

OPTICAL SYSTEMS FOR SYNCHROTRON RADIATION: LECTURE 4. SOFT X-RAY IMAGING SYSTEMS

The history and present techniques of soft x-ray imaging are reviewed briefly. The physics of x-ray imaging is described, including the temporal and spatial coherence of x-ray sources. Particular technologies described are: contact x-ray microscopy, zone plate imaging, scanned image zone plate microscopy, scanned image reflection microscopy, and soft x-ray holography and diffraction. (LEW