Measurement of the cross section and muon charge asymmetry from charged current Drell-Yan process at 13 TeV centre of mass energy with the ATLAS detector

PhDThis thesis documents the measurements of the W ! (charged current Drell-Yan Process) production cross section and the muon charge asymmetry. Experimental data and Monte Carlo samples, from proton-proton collisions at a centre of mass energy of 13 TeV, corresponding to a total integrated luminosity of 44.3 fb 1 are utilised; the data presented was recorded by the ATLAS experiment at the Large Hadron Collider during the year 2017. The measurements are performed di erentially in muon pseudorapidity j j and are within the W boson invariant mass in a kinematic ducial volume of muon and neutrino transverse momentum p ; T > 30 GeV and muon pseudorapidity j j < 2:4. The ducial measurements uncertainties are below 2% empowering these measurements to constrain the modelling of the proton composition.Consejo Nacional de Ciencia y Tecnologia (CONACYT) and Consejo Zacatecano de Ciencia, Tecnlogia e Innovacion (COZCYT)

Lethal Concentration of Carbonate OF Ca as a Function of the Osmotic Potential of the Solution in Sunflower (Heliantusannuus L.)

In order to know the effect of CaCO3 in solution, sunflower seedlings cv. Victoria, an experiment was completely randomized, where five concentrations of calcium carbonate were evaluated to determine the lethal concentration (LC50), pH and EC of the solution under laboratory conditions in the Universidad Tecnologica de Tehuacan, to simulate of excess Ca++ in the soils or nutrient solution. The results indicate, the LC50 was 62.8 mg CaCO3 L-1, so maximum values for pH, EC and calcium absorption, They were achieved at concentrations of 120 and 160 mg L-1 of CaCO3. This work can be concluded, Sunflower can absorb the high levels of calcium and used as an alternative, for remediation of agricultural soils affected hard water and Ca++ salts

Hardware-in-the-loop Testing of On-Off Controllers in Semi-Active Suspension Systems

International audienceThis paper presents an experimental validation of a proposed Frequency Estimation-Based (FEB) controller for semi-active suspensions by using a Hardware-in-the-Loop (HiL) platform of a Quarter of Vehicle (QoV) model. The FEB approach is compared with three commercial On-Off controllers that have shown good results in comfort and road holding: Sky-Hook (SH), Groud-Hook (GH) and Mix-1-sensor (M1S). The comparison was done under the same experimental tests; the standards ISO-2631 and BS-6841 are used to evaluate the comfort and the Root Mean Square (RMS) index to quantify the road holding. The QoV model belongs to a front-left corner of a pick-up truck; the used experimental Magneto-Rheological (MR) damper is not symmetric and only hast 2 manipulation states. Experimental results show that the FEB controller has the best comfort performance at low frequencies (outperforms the benchmark controllers at 11.2%); while, for road holding, the improvement is slight; however, FEB controller works better for both goals simultaneously. By analyzing the suspension deflection, the FEB controller reduces up to 32.8% of motion respect to the GH controller. Additionally, the manipulation of the SH and GH controllers have several changes of actuation that do not allow the stabilization of the force in its desirable value; while FEB controller has a soft actuation defined on bandwidths

Crecimiento y caracterización de películas delgadas de tio2 y ti1- xfexo2

Titanium dioxide (TiO2) and Fe-doped titanium dioxide (Ti1-xFexO2) thin films were grown on silicon substrates using the magnetron sputtering Rf (13.56 MHz) technique. The relevant growth parameters for the samples (pressure, power, gas mixture ratio, distance between target-substrate, among others) were found. The plasma deposition environment for the ternary films was characterized by optical emission spectroscopy in order to verify and identify the present species which were iron and titanium. The TiO2 films, deposited on silicon substrates [100], showed an amorphous phase while the ternary films showed low crystallinity. After annealing at 800 °C crystalline phases appeared, rutile in binary films and mixed in ternary films.Fil: Galvis, J.. Universidad de Antioquia; ColombiaFil: Ramirez Jimenez, Helena. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; ArgentinaFil: Montes, J.. Universidad de Antioquia; ColombiaFil: Sanchez, L.. Universidad de Antioquia; ColombiaFil: Beltran, J.. Universidad de Antioquia; ColombiaFil: Barrero, C.. Universidad de Antioquia; ColombiaFil: Morales, A.. Universidad de Antioquia; ColombiaFil: Gomez, J.. Universidad del Quindío; ColombiaFil: Tirado Mejia, L.. Universidad del Quindío; ColombiaFil: Osorio, J.. Universidad de Antioquia; Colombi

Active commuting is associated with a lower risk of obesity, diabetes and metabolic syndrome in Chilean adults

Background: There is limited evidence on how active commuting is associated with health benefits in developing countries. The aim of this study therefore was to investigate the associations between active commuting and markers of adiposity and cardiometabolic risk in the Chilean adult population. Methods: In total, 5157 participants from the Chilean National Health Survey 2009–10 were included in this cross-sectional study. Active commuting was measured using the Global Physical Activity Questionnaire (GPAQ v2). Body mass index (BMI) and waist circumference (WC) were measured and used to define obesity and central obesity. Type 2 diabetes (T2D) and metabolic syndrome were determined using WHO and updated ATPIII-NCEP criteria, respectively. Results: The main finding of this study is that a 30 min increase in active commuting is associated with lower odds for BMI &gt; 25.0 kg m−2 (0.93 [95% CI: 0.88–0.98, P = 0.010]). Similarly, the odds for central obesity was 0.87 [0.82–0.92, P &lt; 0.0001]. Similar associations were found for T2D (0.81 [0.75–0.88], P &lt; 0.0001) and metabolic syndrome (OR: 0.86 [0.80–0.92], P &lt; 0.0001). Conclusion: Our findings show that active commuting is associated with lower adiposity and a healthier metabolic profile including lower risk for obesity, diabetes and metabolic syndrome

Improved performance of perylenediimide-based lasers

The aim of this work was to improve the laser performance, in terms of threshold and operational lifetime, of lasers based on polymer films doped with perylenediimide (PDI) derivatives as active media. For such purpose, we first investigated the amplified spontaneous emission (ASE) properties of perylene orange (PDI-O), when doped into polystyrene (PS) films. Lower ASE thresholds and larger photostabilities than those of similar films containing another PDI derivative (PDI-C6), recently reported in the literature, have been measured. Results have been interpreted in terms of the photoluminescence efficiency of the films, which depends on the type of molecular arrangement, inferred with the help of nuclear magnetic resonance experiments. We also show that PS films have a better ASE performance, i.e. lower thresholds and larger photostabilities, than those based on poly(methyl methacrylate), which was recently highlighted as one of the best matrixes for PDI-O. Finally, a one-dimensional second-order distributed feedback laser using PS doped with PDI-O was fabricated and characterized. This device has shown a threshold significantly lower (by around one order of magnitude) than that of a similar laser based on PDI-C6-doped PS.We thank support from the Spanish Government (MECC) and the European Community (FEDER) through grants MAT2008-06648-C02 and MAT-2011-28167-C02, as well as from the University of Alicante. MGR and MM are supported respectively by a CSIC fellowship within the program JAE and by MEC through a FPI fellowship

Variable order Mittag-Leffler fractional operators on isolated time scales and application to the calculus of variations

We introduce new fractional operators of variable order on isolated time scales with Mittag-Leffler kernels. This allows a general formulation of a class of fractional variational problems involving variable-order difference operators. Main results give fractional integration by parts formulas and necessary optimality conditions of Euler-Lagrange type.Comment: This is a preprint of a paper whose final and definite form is with Springe

Joint effect of physical activity and sedentary behaviour on cardiovascular risk factors in Chilean adults

Background: To investigate the associations between combined categories of moderate-to-vigorous physical activity (MVPA) and sedentary behaviour (SB) with markers of adiposity and cardiovascular risk in adults. Methods: Overall, 5040 participants (mean age 46.4 years and 59.3% women) from the cross-sectional Chilean National Health Survey 2009–2010 were included in this study. MVPA and SB were measured using the Global Physical Activity questionnaire. Four categories were computed using MVPA- and SB-specific cut-offs (‘High-SB &#38; Active’, ‘Low-SB &#38; Active’, ‘High-SB &#38; Inactive’ and ‘Low-SB &#38; Inactive’). Results: Compared to the reference group (‘High-SB &#38; Inactive’), those in ‘High-SB &#38; Active’ and ‘Low-SB &#38; Active’ were less likely to have an obese BMI (OR: 0.67 [0.54; 0.85], P = 0.0001 and 0.74 [0.59; 0.92] P = 0.0007, respectively) and less likely to have metabolic syndrome (OR: 0.63 [0.49; 0.82], P &lt; 0.0001 and 0.72 [0.57; 0.91], P = 0.007), central obesity (OR: 0.79 [0.65; 0.96], P = 0.016 and 0.71 [0.59; 0.84], P &lt; 0.0001), diabetes (OR: 0.45 [0.35; 0.59], P &lt; 0.0001 and 0.44 [0.34; 0.56], P &lt; 0.0001) and hypertension (OR: 0.52 [0.43; 0.63], P &lt; 0.0001 and 0.60 [0.50; 0.72], P &lt; 0.0001), respectively. Conclusions: Being physically active and spending less time in SBs was associated with lower adiposity and improvements in cardiovascular risk factors

Condition monitoring strategy based on spectral energy estimation and linear discriminant analysis applied to electric machines

Condition-based maintenance plays an important role to ensure the working condition and to increase the availability of the machinery. The feature calculation and feature extraction are critical signal processing that allow to obtain a high-performance characterization of the available physical magnitudes related to specific working conditions of machines. Aiming to overcome this issue, this research proposes a novel condition monitoring strategy based on the spectral energy estimation and Linear Discriminant Analysis for diagnose and identify different operating conditions in an induction motor-based electromechanical system. The proposed method involves the acquisition of vibration signals from which the frequency spectrum is computed through the Fast Fourier Transform. Subsequently, such frequency spectrum is segmented to estimate a feature matrix in terms of its spectral energy. Finally, the feature matrix is subjected to a transformation into a 2-dimentional base by means of the Linear Discriminant Analysis and the final diagnosis outcome is performed by a NN-based classifier. The proposed strategy is validated under a complete experimentally dataset acquired from a laboratory electromechanical system.Peer ReviewedPostprint (published version