Effect of high-pressure torsion on microstructure, mechanical properties and corrosion resistance of cast pure Mg

© 2018, The Author(s). High-pressure torsion (HPT) processing was applied to cast pure magnesium, and the effects of the deformation on the microstructure, hardness, tensile properties and corrosion resistance were evaluated. The microstructures of the processed samples were examined by electron backscatter diffraction, and the mechanical properties were determined by Vickers hardness and tensile testing. The corrosion resistance was studied using electrochemical impedance spectroscopy in a 3.5% NaCl solution. The results show that HPT processing effectively refines the grain size of Mg from millimeters in the cast structure to a few micrometers after processing and also creates a basal texture on the surface. It was found that one or five turns of HPT produced no significant difference in the grain size of the processed Mg and the hardness was a maximum after one turn due to recovery in some grains. Measurements showed that the yield strength of the cast Mg increased by about seven times whereas the corrosion resistance was not significantly affected by the HPT processing

Genetic variation and exercise-induced muscle damage: implications for athletic performance, injury and ageing.

Prolonged unaccustomed exercise involving muscle lengthening (eccentric) actions can result in ultrastructural muscle disruption, impaired excitation-contraction coupling, inflammation and muscle protein degradation. This process is associated with delayed onset muscle soreness and is referred to as exercise-induced muscle damage. Although a certain amount of muscle damage may be necessary for adaptation to occur, excessive damage or inadequate recovery from exercise-induced muscle damage can increase injury risk, particularly in older individuals, who experience more damage and require longer to recover from muscle damaging exercise than younger adults. Furthermore, it is apparent that inter-individual variation exists in the response to exercise-induced muscle damage, and there is evidence that genetic variability may play a key role. Although this area of research is in its infancy, certain gene variations, or polymorphisms have been associated with exercise-induced muscle damage (i.e. individuals with certain genotypes experience greater muscle damage, and require longer recovery, following strenuous exercise). These polymorphisms include ACTN3 (R577X, rs1815739), TNF (-308 G>A, rs1800629), IL6 (-174 G>C, rs1800795), and IGF2 (ApaI, 17200 G>A, rs680). Knowing how someone is likely to respond to a particular type of exercise could help coaches/practitioners individualise the exercise training of their athletes/patients, thus maximising recovery and adaptation, while reducing overload-associated injury risk. The purpose of this review is to provide a critical analysis of the literature concerning gene polymorphisms associated with exercise-induced muscle damage, both in young and older individuals, and to highlight the potential mechanisms underpinning these associations, thus providing a better understanding of exercise-induced muscle damage

Magnetic resonance imaging evaluation of intervertebral test spacers: an experimental comparison of magnesium versus titanium and carbon fiber reinforced polymers as biomaterials

Introduction Intervertebral spacers are made of different materials, which can affect the postfusion magnetic resonance imaging (MRI) scans. Susceptibility artifacts, especially for metallic implants, can decrease the image quality. This study aimed to determine whether magnesium as a lightweight and biocompatible metal is suitable as a biomaterial for spinal implants based on its MRI artifacting behavior. Materials and methods To compare artifacting behaviors, we implanted into one porcine cadaveric spine different test spacers made of magnesium, titanium, and CFRP. All test spacers were scanned using two T1-TSE MRI sequences. The artifact dimensions were traced on all scans and statistically analyzed. Results The total artifact volume and median artifact area of the titanium spacers were statistically significantly larger than magnesium spacers (P 0.05). Conclusion Our results suggest that spinal implants made with magnesium alloys will behave more like CFRP devices in MRI scans

Artifacts in spine magnetic resonance imaging due to different intervertebral test spacers: an in vitro evaluation of magnesium versus titanium and carbon-fiber-reinforced polymers as biomaterials

Introduction Intervertebral spacers are made of different materials, which can affect the postfusion magnetic imaging (MRI) scans. Susceptibility artifacts especially for metallic implants can decrease the image quality. This study aimed to determine whether magnesium as a lightweight and biocompatible metal is suitable as a biomaterial for spinal implants based on its MRI artifacting behavior. Materials and methods To compare artifacting behaviors, we implanted into one porcine cadaveric spine different test spacers made of magnesium, titanium, and carbon-fiber-reinforced polymers (CFRP). All test spacers were scanned using two T1-TSE MRI sequences. The artifact dimensions were traced on all scans and statistically analyzed. Results The total artifact volume and median artifact area of the titanium spacers were statistically significantly larger than magnesium spacers (p0.05). Conclusion Our results suggest that spinal implants made with magnesium alloys will behave more like CFRP devices in MRI scans. Given its osseoconductive potential as a metal, implant alloys made with magnesium would combine the advantages to the two principal spacer materials currently used but without their limitations, at least in terms of MRI artifacting

In vitro degradation behavior and cytocompatibility of Mg–Zn–Zr alloys

Zinc and zirconium were selected as the alloying elements in biodegradable magnesium alloys, considering their strengthening effect and good biocompatibility. The degradation rate, hydrogen evolution, ion release, surface layer and in vitro cytotoxicity of two Mg–Zn–Zr alloys, i.e. ZK30 and ZK60, and a WE-type alloy (Mg–Y–RE–Zr) were investigated by means of long-term static immersion testing in Hank’s solution, non-static immersion testing in Hank’s solution and cell-material interaction analysis. It was found that, among these three magnesium alloys, ZK30 had the lowest degradation rate and the least hydrogen evolution. A magnesium calcium phosphate layer was formed on the surface of ZK30 sample during non-static immersion and its degradation caused minute changes in the ion concentrations and pH value of Hank’s solution. In addition, the ZK30 alloy showed insignificant cytotoxicity against bone marrow stromal cells as compared with biocompatible hydroxyapatite (HA) and the WE-type alloy. After prolonged incubation for 7 days, a stimulatory effect on cell proliferation was observed. The results of the present study suggested that ZK30 could be a promising material for biodegradable orthopedic implants and worth further investigation to evaluate its in vitro and in vivo degradation behavior

Does patient-physiotherapist agreement influence the outcome of low back pain? A prospective cohort study

BACKGROUND: Recent research suggests that agreement between patients' and health professionals' perceptions may influence the outcome of various painful conditions. This issue has received little attention in the context of low back pain and physiotherapy interventions. The current study aimed at exploring the relationship between patient-physiotherapist agreement on baseline low back pain intensity and related functional limitations, and changes in patient outcomes four weeks later. METHODS: Seventy-eight patient-physiotherapist dyads were included in the study. At baseline, patients and physiotherapists completed a Numerical Rating Scale and the Roland-Morris Disability Questionnaire. Patients' perceptions were reassessed over the phone at follow-up. RESULTS: Using multiple regression, baseline level of patient-physiotherapist agreement on pain intensity was associated with both outcome measures at follow-up. Agreement on functional limitations had no impact on outcomes. CONCLUSION: The results of this study indicate that patient-physiotherapist agreement has some impacts on the short-term outcomes of low back pain. Further research is needed to confirm these findings

Envelhecimento por Deformação em Juntas Soldadas de Tubos de Aço API5L X65Q sem Costura

Resumo Neste trabalho, investigaram-se efeitos do fenômeno de envelhecimento por deformação em juntas obtidas por soldagem a arco elétrico com proteção gasosa (GMAW), de tubos sem costura de aço API5L X65Q. Corpos de prova (CPs) obtidos a partir das juntas soldadas foram submetidos à uma deformação plástica a frio de 3% e posteriormente envelhecidas por 1h a 250°C, de forma a se induzir envelhecimento estático. Buscando avaliar o envelhecimento dinâmico, os CPs foram deformados até 3% e o carregamento foi mantido durante 1h a 250°C. Os CPs envelhecidos foram submetidos a ensaios de tração e amostras representativas foram analisadas ao microscópio óptico e microscópio eletrônico de varredura. Observou-se que o fenômeno modificou a fração volumétrica de constituintes secundários no metal de solda e na ZTA, com aumento na proporção de agregados ferrita-carbonetos. Com relação às propriedades mecânicas, constatou-se que o fenômeno reduziu a razão elástica das juntas soldadas devido a um aumento no limite de resistência, além de aumentar o alongamento total, não prejudicando, portanto, as propriedades mecânicas em tração das juntas soldadas. Ao se comparar o envelhecimento estático com o envelhecimento dinâmico, observou-se que o aumento na capacidade de deformação plástica das juntas soldadas foi maior após envelhecimento estático por deformação

The provocative lumbar facet joint

Low back pain is the most common pain symptom experienced by American adults and is the second most common reason for primary care physician visits. There are many structures in the lumbar spine that can serve as pain generators and often the etiology of low back pain is multifactorial. However, the facet joint has been increasingly recognized as an important cause of low back pain. Facet joint pain can be diagnosed with local anesthetic blocks of the medial branches or of the facet joints themselves. Subsequent radiofrequency lesioning of the medial branches can provide more long-term pain relief. Despite some of the pitfalls associated with facet joint blocks, they have been shown to be valid, safe, and reliable as a diagnostic tool. Medial branch denervation has shown some promise for the sustained control of lumbar facet joint-mediated pain, but at this time, there is insufficient evidence that it is a wholly efficacious treatment option. Developing a universal algorithm for evaluating facet joint-mediated pain and standard procedural techniques may facilitate the performance of larger outcome studies. This review article provides an overview of the anatomy, pathophysiology, diagnosis, and treatment of facet joint-mediated pain