Low-Concentration Solar-Power Systems Based on Organic Rankine Cycles for Distributed-Scale Applications: Overview and Further Developments

This paper is concerned with the emergence and development of low-to-medium-grade thermal-energy-conversion systems for distributed power generation based on thermo- dynamic vapor-phase heat-engine cycles undergone by organic working uids, namely organic Rankine cycles (ORCs). ORC power systems are, to some extent, a relatively established and mature technology that is well-suited to converting low/medium-grade heat (at temperatures up to ~300–400°C) to useful work, at an output power scale from a few kilowatts to 10s of megawatts. Thermal ef ciencies in excess of 25% are achievable at higher temperatures and larger scales, and efforts are currently in progress to improve the overall economic viability and thus uptake of ORC power systems, by focusing on advanced architectures, working- uid selection, heat exchangers and expansion machines. Solar-power systems based on ORC technology have a signi cant potential to be used for distributed power generation, by converting thermal energy from simple and low-cost non-concentrated or low-concentration collectors to mechanical, hydrau- lic, or electrical energy. Current elds of use include mainly geothermal and biomass/ biogas, as well as the recovery and conversion of waste heat, leading to improved energy ef ciency, primary energy (i.e., fuel) use and emission minimization, yet the technology is highly transferable to solar-power generation as an affordable alternative to small-to- medium-scale photovoltaic systems. Solar-ORC systems offer naturally the advantages of providing a simultaneous thermal-energy output for hot water provision and/or space heating, and the particularly interesting possibility of relatively straightforward onsite (thermal) energy storage. Key performance characteristics are presented, and important heat transfer effects that act to limit performance are identi ed as noteworthy directions of future research for the further development of this technology

A Mechanism of Polymer Induced Drag Reduction in Turbulent Pipe

Polymer induced drag reduction in turbulent pipe flow was investigated using a non-intrusive laser based diagnostic technique, namely Particle Image Velocimetry (PIV). The drag reduction was measured in a pressure-driven flow facility, in a horizontal pipe of inner diameter 25.3 mm at Reynolds numbers ranging from 35 000 to 210 000. Three high- molecular-weight polymers (polyethylene oxide 2x10^6 – 8x10^6 Da) at concentrations in the range of 5 – 250 wppm were used. The results, obtained from the PIV measurements, show that the drag reduction scales with the magnitude of the normalized streamwise and spanwise rms velocity fluctuations in the flow. This scaling seems to universal, and is independent of the Reynolds number and in some cases also independent of the distance from the wall where the velocity fluctuations are considered. Furthermore, the instantaneous PIV observations indicate that as the level of drag reduction increases, the flow in the pipe is separated into a low-momentum flow region near the pipe wall and a high-momentum flow region in the turbulent core. Based on these findings a new mechanism of polymeric drag reduction is proposed in this paper

A dynamic model for the optimization of oscillatory low grade heat engines

The efficiency of a thermodynamic system is a key quantity on which its usefulness and wider application relies. This is especially true for a device that operates with marginal energy sources and close to ambient temperatures. Various definitions of efficiency are available, each of which reveals a certain performance characteristic of a device. Of these, some consider only the thermodynamic cycle undergone by the working fluid, whereas others contain additional information, including relevant internal components of the device that are not part of the thermodynamic cycle. Yet others attempt to factor out the conditions of the surroundings with which the device is interfacing thermally during operation. In this paper we present a simple approach for the modeling of complex oscillatory thermal-fluid systems capable of converting low grade heat into useful work. We apply the approach to the NIFTE, a novel low temperature difference heat utilization technology currently under development. We use the results from the model to calculate various efficiencies and comment on the usefulness of the different definitions in revealing performance characteristics. We show that the approach can be applied to make design optimization decisions, and suggest features for optimal efficiency of the NIFTE

Wave Structure and Velocity Profiles in Downwards Gas-Liquid Annular Flow

The downwards co-current gas-liquid annular flows inside a vertically oriented pipe have been experimentally investigated. The measurements and characterisation were performed using advanced optical non-intrusive laser-based techniques, namely Laser Induced Fluorescence, and Particle Image/Tracking Velocimetry. The investigated conditions were in the range of ReL = 306 – 1,532 and ReG = 0 – 84,600. Temporal film thickness time traces were constructed using the Laser Induced Fluorescence images. Based on these, the wave frequency was evaluated using direct wave counting approach and power spectral density analysis. Additionally, qualitative PIV observations revealed the presence of recirculation zones within a wave front of disturbance waves

An investigation of film wavy structure in annular flow using two simultaneous LIF approaches

The paper is devoted to development and validation of film thickness measurement techniques in interfacial gas-liquid flows. The specific flow investigated here is that of downwards (co-flowing) annular flow in a vertical pipe, however, many of the observations and findings are transferable to similar flow geometries. Two advanced spatially resolved techniques, namely planar laser-induced fluorescence and brightness-based laser-induced fluorescence , are used simultaneously in the same area of interrogation. A single laser sheet is used to excite fluorescence along one longitudinal section of the pipe, and two cameras (one for each method) are placed at different angles to the plane of the laser sheet in order to independently recover the shape of the interface along this section. This allows us to perform a cross-validation of the two techniques and to analyse their respective characteristics, advantages and shortcomings

Framework for the energetic assessment of South and South-East Asia fixed chimney bull’s trench kiln

One of the major sources of fuel consumption and greenhouse gas emission in South and South-East Asia is brick manufacturing. One of the most commonly implemented technologies for brick manufacturing in this region is the fixed chimney Bull’s trench kiln (FCBTK). This type of technology largely depends on manual labour and is very inefficient when compared to more modern technologies. Because the adoption of more advanced technologies is hindered by the socio-economical background, the much needed innovations in the brick sector are necessarily related to improving/modifying the FCBTK already operational. However, few scientific studies have been conducted on FCBTK probably due to the basic level of technological development. Such studies are however important to systematically and methodologically assess the challenges and solutions in FCBTK. In this study we develop a thermo-energetic model to evaluate the importance of the parameters pertained to FCBTK construction and operation. The prospective of this study is to build an initial thermo-energetic framework that will serve as a basis to investigate possible energetic improvements