Chemical Composition of Emissions from Urban Sources of Fine Organic Aerosol

A dilution source sampling system was used to collect primary fine aerosol emissions from important sources of urban organic aerosol, including a boiler burning No. 2 fuel oil, a home fireplace, a fleet of catalyst-equipped and noncatalyst automobiles, heavy-duty diesel trucks, natural gas home appliances, and meat cooking operations. Alternative dilution sampling techniques were used to collect emissions from cigarette smoking and a roofing tar pot, and grab sample techniques were employed to characterize paved road dust, brake lining wear, tire wear, and vegetative detritus. Organic aerosol constituted the majority of the fine aerosol mass emitted from many of the sources tested. Fine primary organic aerosol emissions within the heavily urbanized western portion of the Los Angeles Basin were determined to total 29.8 metric tons/day. Over 40% of these organic aerosol emissions are from anthropogenic pollution sources that are expected to emit contemporary (nonfossil) aerosol carbon, in good agreement with the available ambient monitoring data

Aeroacoustic Study of a High-Fidelity Aircraft Model: Part 1- Steady Aerodynamic Measurements

In this paper, we present steady aerodynamic measurements for an 18% scale model of a Gulfstream air-craft. The high fidelity and highly-instrumented semi-span model was developed to perform detailed aeroacoustic studies of airframe noise associated with main landing gear/flap components and gear-flap interaction noise, as well as to evaluate novel noise reduction concepts. The aeroacoustic tests, being conducted in the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel, are split into two entries. The first entry, completed November 2010, was entirely devoted to the detailed mapping of the aerodynamic characteristics of the fabricated model. Flap deflections of 39?, 20?, and 0? with the main landing gear on and off were tested at Mach numbers of 0.16, 0.20, and 0.24. Additionally, for each flap deflection, the model was tested with the tunnel both in the closed-wall and open-wall (jet) modes. During this first entry, global forces (lift and drag) and extensive steady and unsteady surface pressure measurements were obtained. Preliminary analysis of the measured forces indicates that lift, drag, and stall characteristics compare favorably with Gulfstream?s high Reynolds number flight data. The favorable comparison between wind-tunnel and flight data allows the semi-span model to be used as a test bed for developing/evaluating airframe noise reduction concepts under a relevant environment. Moreover, initial comparison of the aerodynamic measurements obtained with the tunnel in the closed- and open-wall configurations shows similar aerodynamic behavior. This permits the acoustic and off-surface flow measurements, planned for the second entry, to be conducted with the tunnel in the open-jet mode

An anti-establishment backlash that shook up the party system? The October 2015 Polish parliamentary election

The October 2015 Polish parliamentary election saw the stunning victory of the right-wing opposition Law and Justice party which became the first in post-communist Poland to secure an outright parliamentary majority, and equally comprehensive defeat of the incumbent centrist Civic Platform. In addition to the fact that the outgoing ruling party could no longer rely on invoking the ‘politics of fear’, the main factor accounting for this was widespread disillusionment with the country’s ruling elite. The election also saw the broad ‘post-transition’ socio-demographic and ideological divide and Law and Justice-Civic Platform duopoly continuing to dominate party competition. However, there were some indications of greater party system fluidity and question marks over who would emerge as the main representative of the anti-Law and Justice side of this divide

Measurements, Models, Systems and Design

531 s.

Screening of antioxidant properties of the apple juice using the front-face synchronous fluorescence and chemometrics

Fluorescence spectroscopy is gaining increasing attention in food analysis due to its higher sensitivity and selectivity as compared to other spectroscopic techniques. Synchronous scanning fluorescence technique is particularly useful in studies of multi-fluorophoric food samples, providing a further improvement of selectivity by reduction in the spectral overlapping and suppressing light-scattering interferences. Presently, we study the feasibility of the prediction of the total phenolics, flavonoids, and antioxidant capacity using front-face synchronous fluorescence spectra of apple juices. Commercial apple juices from different product ranges were studied. Principal component analysis (PCA) applied to the unfolded synchronous fluorescence spectra was used to compare the fluorescence of the entire sample set. The regression analysis was performed using partial least squares (PLS1 and PLS2) methods on the unfolded total synchronous and on the single-offset synchronous fluorescence spectra. The best calibration models for all of the studied parameters were obtained using the PLS1 method for the single-offset synchronous spectra. The models for the prediction of the total flavonoid content had the best performance; the optimal model was obtained for the analysis of the synchronous fluorescence spectra at Delta lambda = 110 nm (R (2) = 0.870, residual predictive deviation (RPD) = 2.7). The optimal calibration models for the prediction of the total phenolic content (Delta lambda = 80 nm, R (2) = 0.766, RPD = 2.0) and the total antioxidant capacity (Delta lambda = 70 nm, R (2) = 0.787, RPD = 2.1) had only an approximate predictive ability. These results demonstrate that synchronous fluorescence could be a useful tool in fast semi-quantitative screening for the antioxidant properties of the apple juices.info:eu-repo/semantics/publishedVersio

Joint pricing and ordering policies for deteriorating item with retail price-dependent demand in response to announced supply price increase

[[abstract]]Recently, due to rapid economic development in emerging nations, the world's raw material prices have been rising. In today's unrestricted information environment, suppliers typically announce impending supply price increases at specific times. This allows retailers to replenish their stock at the present price, before the price increase takes effect. The supplier, however, will generally offer only limited quantities prior to the price increase, so as to avoid excessive orders. The retail price will usually reflect any supply price increases, as market demand is dependent on retail price. This paper considers deteriorating items and investigates (1) the possible effects of a supply price increase on retail pricing, and (2) ordering policies under the conditions that special order quantities are limited and demand is dependent on retail price. The purpose of this paper is to determine the optimal special order quantity and retail price to maximize profit. Our theoretical analysis examines the necessary and sufficient conditions for an optimal solution, and an algorithm is established to obtain the optimal solution. Furthermore, several numerical examples are given to illustrate the developed model and the solution procedure. Finally, a sensitivity analysis is conducted on the optimal solutions with respect to major parameters.[[incitationindex]]SCI[[booktype]]紙

An evaluation of the reliability of the 8-second Skipping with Hand Clapping (8-s SHC) Test with the use of the retest method

Evaluation of speed ability in students, male and female, studying in Universit

Technical evaluation of proposed Ukrainian Central Radioactive Waste Processing Facility

This technical report is a comprehensive evaluation of the proposal by the Ukrainian State Committee on Nuclear Power Utilization to create a central facility for radioactive waste (not spent fuel) processing. The central facility is intended to process liquid and solid radioactive wastes generated from all of the Ukrainian nuclear power plants and the waste generated as a result of Chernobyl 1, 2 and 3 decommissioning efforts. In addition, this report provides general information on the quantity and total activity of radioactive waste in the 30-km Zone and the Sarcophagus from the Chernobyl accident. Processing options are described that may ultimately be used in the long-term disposal of selected 30-km Zone and Sarcophagus wastes. A detailed report on the issues concerning the construction of a Ukrainian Central Radioactive Waste Processing Facility (CRWPF) from the Ukrainian Scientific Research and Design institute for Industrial Technology was obtained and incorporated into this report. This report outlines various processing options, their associated costs and construction schedules, which can be applied to solving the operating and decommissioning radioactive waste management problems in Ukraine. The costs and schedules are best estimates based upon the most current US industry practice and vendor information. This report focuses primarily on the handling and processing of what is defined in the US as low-level radioactive wastes