Reconstruction of extensive air shower images of the Large Size Telescope prototype of CTA using a novel likelihood technique

Ground-based gamma-ray astronomy aims at reconstructing the energy and direction of gamma rays from the extensive air showers they initiate in the atmosphere. Imaging Atmospheric Cherenkov Telescopes (IACT) collect the Cherenkov light induced by secondary charged particles in extensive air showers (EAS), creating an image of the shower in a camera positioned in the focal plane of optical systems. This image is used to evaluate the type, energy and arrival direction of the primary particle that initiated the shower. This contribution shows the results of a novel reconstruction method based on likelihood maximization. The novelty with respect to previous likelihood reconstruction methods lies in the definition of a likelihood per single camera pixel, accounting not only for the total measured charge, but also for its development over time. This leads to more precise reconstruction of shower images. The method is applied to observations of the Crab Nebula acquired with the Large Size Telescope prototype (LST-1) deployed at the northern site of the Cherenkov Telescope Array

Status and results of the prototype LST of CTA

The Large-Sized Telescopes (LSTs) of Cherenkov Telescope Array (CTA) are designed for gamma-ray studies focusing on low energy threshold, high flux sensitivity, rapid telescope repositioning speed and a large field of view. Once the CTA array is complete, the LSTs will be dominating the CTA performance between 20 GeV and 150 GeV. During most of the CTA Observatory construction phase, however, the LSTs will be dominating the array performance until several TeVs. In this presentation we will report on the status of the LST-1 telescope inaugurated in La Palma, Canary islands, Spain in 2018. We will show the progress of the telescope commissioning, compare the expectations with the achieved performance, and give a glance of the first physics results

First follow-up of transient events with the CTA Large Size Telescope prototype

When very-high-energy gamma rays interact high in the Earth’s atmosphere, they produce cascades of particles that induce flashes of Cherenkov light. Imaging Atmospheric Cherenkov Telescopes (IACTs) detect these flashes and convert them into shower images that can be analyzed to extract the properties of the primary gamma ray. The dominant background for IACTs is comprised of air shower images produced by cosmic hadrons, with typical noise-to-signal ratios of several orders of magnitude. The standard technique adopted to differentiate between images initiated by gamma rays and those initiated by hadrons is based on classical machine learning algorithms, such as Random Forests, that operate on a set of handcrafted parameters extracted from the images. Likewise, the inference of the energy and the arrival direction of the primary gamma ray is performed using those parameters. State-of-the-art deep learning techniques based on convolutional neural networks (CNNs) have the potential to enhance the event reconstruction performance, since they are able to autonomously extract features from raw images, exploiting the pixel-wise information washed out during the parametrization process. Here we present the results obtained by applying deep learning techniques to the reconstruction of Monte Carlo simulated events from a single, next-generation IACT, the Large-Sized Telescope (LST) of the Cherenkov Telescope Array (CTA). We use CNNs to separate the gamma-ray-induced events from hadronic events and to reconstruct the properties of the former, comparing their performance to the standard reconstruction technique. Three independent implementations of CNN-based event reconstruction models have been utilized in this work, producing consistent results

Development of an advanced SiPM camera for the Large Size Telescope of the Cherenkov TelescopeArray Observatory

Silicon photomultipliers (SiPMs) have become the baseline choice for cameras of the small-sized telescopes (SSTs) of the Cherenkov Telescope Array (CTA). On the other hand, SiPMs are relatively new to the field and covering large surfaces and operating at high data rates still are challenges to outperform photomultipliers (PMTs). The higher sensitivity in the near infra-red and longer signals compared to PMTs result in higher night sky background rate for SiPMs. However, the robustness of the SiPMs represents a unique opportunity to ensure long-term operation with low maintenance and better duty cycle than PMTs. The proposed camera for large size telescopes will feature 0.05 degree pixels, low power and fast front-end electronics and a fully digital readout. In this work, we present the status of dedicated simulations and data analysis for the performance estimation. The design features and the different strategies identified, so far, to tackle the demanding requirements and the improved performance are described

Analysis of the Cherenkov Telescope Array first Large Size Telescope real data using convolutional neural networks

The Cherenkov Telescope Array (CTA) is the future ground-based gamma-ray observatory and will be composed of two arrays of imaging atmospheric Cherenkov telescopes (IACTs) located in the Northern and Southern hemispheres respectively. The first CTA prototype telescope built on-site, the Large-Sized Telescope (LST-1), is under commissioning in La Palma and has already taken data on numerous known sources. IACTs detect the faint flash of Cherenkov light indirectly produced after a very energetic gamma-ray photon has interacted with the atmosphere and generated an atmospheric shower. Reconstruction of the characteristics of the primary photons is usually done using a parameterization up to the third order of the light distribution of the images. In order to go beyond this classical method, new approaches are being developed using state-of-the-art methods based on convolutional neural networks (CNN) to reconstruct the properties of each event (incoming direction, energy and particle type) directly from the telescope images. While promising, these methods are notoriously difficult to apply to real data due to differences (such as different levels of night sky background) between Monte Carlo (MC) data used to train the network and real data. The GammaLearn project, based on these CNN approaches, has already shown an increase in sensitivity on MC simulations for LST-1 as well as a lower energy threshold. This work applies the GammaLearn network to real data acquired by LST-1 and compares the results to the classical approach that uses random forests trained on extracted image parameters. The improvements on the background rejection, event direction, and energy reconstruction are discussed in this contribution

Commissioning of the camera of the first Large Size Telescope of the Cherenkov Telescope Array

The first Large Size Telescope (LST-1) of the Cherenkov Telescope Array has been operational since October 2018 at La Palma, Spain. We report on the results obtained during the camera commissioning. The noise level of the readout is determined as a 0.2 p.e. level. The gain of PMTs are well equalized within 2% variation, using the calibration flash system. The effect of the night sky background on the signal readout noise as well as the PMT gain estimation are also well evaluated. Trigger thresholds are optimized for the lowest possible gamma-ray energy threshold and the trigger distribution synchronization has been achieved within 1 ns precision. Automatic rate control realizes the stable observation with 1.5% rate variation over 3 hours. The performance of the novel DAQ system demonstrates a less than 10% dead time for 15 kHz trigger rate even with sophisticated online data correction

The 2021 Open-Data release by the Pierre Auger Collaboration

The Pierre Auger Observatory is used to study the extensive air-showers produced by cosmic rays above 10$^{17}$ eV. The Observatory is operated by a Collaboration of about 400 scientists, engineers, technicians and students from more than 90 institutions in 18 countries. The Collaboration is committed to the public release of their data for the purpose of re-use by a wide community including professional scientists, in educational and outreach initiatives, and by citizen scientists. The Open Access Data for 2021 comprises 10% of the samples used for results reported at the Madison ICRC 2019, amounting to over 20000 showers measured with the surface-detector array and over 3000 showers recorded simultaneously by the surface and fluorescence detectors. Data are available in pseudo-raw (JSON) format with summary CSV file containing the reconstructed parameters. A dedicated website is used to host the datasets that are available for download. Their detailed description, along with auxiliary information needed for data analysis, is given. An online event display is also available. Simplified codes derived from those used for published analyses are provided by means of Python notebooks prepared to guide the reader to an understanding of the physics results. Here we describe the Open Access data, discuss the notebooks available and show material accessible to the user at https://opendata.auger.org/