Naturally Compatible: Starch Acetate/Cellulosic Fiber Composites. I. Processing and Properties

Composite compounds based on hemp and flax fibers in triethyl citrate plasticized starch acetate were prepared by melt processing. For better properties and processability, compounds with plasticizer contents in the range 20-35 wt% were screened. Composites were prepared with fiber contents up to 50 wt%. The composite mechanical properties were measured from injection molded test specimens. A Young's modulus of 8.3 GPa and stress at maximum load of 51 MPa were obtained with 40 wt% flax fiber in a plasticized starch acetate with 20 wt% triethyl citrate. Decreasing the plasticizer and increasing the fiber content, the tensile properties were consistently improved. An almost linear relation between fiber content and the tensile properties was found. The increase of the fiber content first improved the impact strength, but at higher fiber contents resulted in a reduction of impact strength. The quality of the produced materials was found to be good; the variation in properties between duplicated compounds was acceptable low, the variation in density and fiber content along a single tensile specimen was low, and finally, the porosity content was low even at high fiber content. The latter result was verified with scanning electron microscope images of fracture surfaces of the composites.</p

Method of making wood-based composite board

A wood composite board or panel, such as particleboard, fiberboard, oriented strand board or waferboard and a method of producing the same. The composite board or panel comprises a plurality of wood pieces, thermoset resin to bind the wood pieces and a filler having a high thermal conductivity. Examples of such a filler include natural and synthetic graphites, metal, carbon, silicon carbide and other similar compounds and their mixtures.https://digitalcommons.mtu.edu/patents/1054/thumbnail.jp

Veneer-based product and method of manufacture

A veneer-based product is made of a plurality of veneer layers, a resin binding the layers, and a filler having a high thermal conductivity.https://digitalcommons.mtu.edu/patents/1056/thumbnail.jp

Wood particle filled polyvinyl chloride composites and their foams

Extruded composite compositions of PVC and wood particles containing chitosan or chitin as a coupling agent are described. The composite compositions have improved physical and mechanical properties.https://digitalcommons.mtu.edu/patents/1029/thumbnail.jp

Some Properties of Composite Panels Made from Wood Flour and Recycled Polyethylene

This study investigated the effect of board type (unmodified vs. MAPE modified) on the surface quality and thickness swelling-water absorption properties of recycled high density polyethylene (HDPE) based wood plastic composites. Additionally, two commercially available coatings (cellulosic coating and polyurethane lacquer coating) were also applied to composite surfaces and their adhesion strength, abrasion and scratch resistance, and gloss values were determined. This study showed that modification of the composites with MAPE coupling agent increased the surface smoothness and reduced the water absorption and thickness swelling of the panels. Abrasion resistance of the composites was also improved through MAPE modification. Regardless of board type, higher scratch resistance and gloss values were observed for polyurethane lacquer coated samples compared to those of cellulosic varnish coated ones. Improvement of adhesion strength was also seen on SEM micrographs

Photodegradation of polystyrene/montmorillonite clay: the effect of the type of clay and presence of salt

Compósitos de poliestireno/montmorilonita (PS/MMT) contendo 2,5% em peso de argila foram preparados com dois tipos de argila modificada com sais quaternários de amônio. Também foram preparadas amostras do PS + sal quaternário de amônio, utilizando-se proporção de sal semelhante à usada na modificação da argila. Todas as amostras foram expostas à radiação UV por períodos de até 12 semanas, e em seguida foram realizados testes para avaliar as modificações em massa molar, propriedades mecânicas (tração e impacto), estrutura química (FTIR) e superfície de fratura (MEV) dessas amostras. Os resultados mostraram que compostos metálicos existentes na argila catalisam o processo fotodegradativo do PS e a presença isolada do sal não altera significativamente o comportamento do PS frente à radiação UV