Spallation dominated propagation of Heavy Cosmic Rays and the Local Interstellar Medium (LISM)

Measurements of ultra heavy nuclei at GeV/n energies in the galactic cosmic radiation address the question of the sources (nucleosynthetic s- and r-processes). As such, the determination of CR source abundances is a promising way to discriminate between existing nucleosynthesis models. For primary species (nuclei present and accelerated at sources), it is generally assumed that the relative propagated abundances, if they are close in mass, are not too different from their relative source abundances. Besides, the range of the correction factor associated to propagation has been estimated in weighted slab models only. Heavy CRs that are detected near Earth were accelerated from regions that are closer to us than were the light nuclei. Hence, the geometry of sources in the Solar neighbourhood, and as equally important, the geometry of gas in the same region, must be taken into account. In this paper, a two zone diffusion model is used, and as was previously investigated for radioactive species, we report here on the impact of the local interstellar medium (LISM) feature (under-dense medium over a scale ~100 pc) on primary and secondary stable nuclei propagated abundances. Going down to Fe nuclei, the connection between heavy and light abundances is also inspected. A general trend is found that decreases the UHCR source abundances relative to the HCR ones. This could have an impact on the level of r-process required to reproduce the data.Comment: 12 pages, 9 figures, accepted by A&A. Comparison with truncated weighted slab and discussion added. Figure 8 modified. New appendix on truncated weighted slab techniqu

Decaying dark matter: a stacking analysis of galaxy clusters to improve on current limits

We show that a stacking approach to galaxy clusters can improve current limits on decaying dark matter by a factor $\gtrsim 5-100$, with respect to a single source analysis, for all-sky instruments such as Fermi-LAT. Based on the largest sample of X-ray-selected galaxy clusters available to date (the MCXC meta-catalogue), we provide all the astrophysical information, in particular the astrophysical term for decaying dark matter, required to perform an analysis with current instruments.Comment: 6 pages, 3 figures, supplementary file available on demand, accepted for publication in PR

The effect of rotation and tidal heating on the thermal lightcurves of Super Mercuries

Short period (<50 days) low-mass (<10Mearth) exoplanets are abundant and the few of them whose radius and mass have been measured already reveal a diversity in composition. Some of these exoplanets are found on eccentric orbits and are subjected to strong tides affecting their rotation and resulting in significant tidal heating. Within this population, some planets are likely to be depleted in volatiles and have no atmosphere. We model the thermal emission of these "Super Mercuries" to study the signatures of rotation and tidal dissipation on their infrared light curve. We compute the time-dependent temperature map at the surface and in the subsurface of the planet and the resulting disk-integrated emission spectrum received by a distant observer for any observation geometry. We calculate the illumination of the planetary surface for any Keplerian orbit and rotation. We include the internal tidal heat flow, vertical heat diffusion in the subsurface and generate synthetic light curves. We show that the different rotation periods predicted by tidal models (spin-orbit resonances, pseudo-synchronization) produce different photometric signatures, which are observable provided that the thermal inertia of the surface is high, like that of solid or melted rocks (but not regolith). Tidal dissipation can also directly affect the light curves and make the inference of the rotation more difficult or easier depending on the existence of hot spots on the surface. Infrared light curve measurement with the James Webb Space Telescope and EChO can be used to infer exoplanets' rotation periods and dissipation rates and thus to test tidal models. This data will also constrain the nature of the (sub)surface by constraining the thermal inertia.Comment: 15 pages, 13 figures, accepted for publication in Astronomy & Astrophysic

Micro-Capsules in Shear Flow

This paper deals with flow-induced shape transitions of elastic capsules. The state of the art concerning both theory and experiments is briefly reviewed starting with dynamically induced small deformation of initially spherical capsules and the formation of wrinkles on polymerized membranes. Initially non-spherical capsules show tumbling and tank-treading motion in shear flow. Theoretical descriptions of the transition between these two types of motion assuming a fixed shape are at variance with the full capsule dynamics obtained numerically. To resolve the discrepancy, we expand the exact equations of motion for small deformations and find that shape changes play a dominant role. We classify the dynamical phase transitions and obtain numerical and analytical results for the phase boundaries as a function of viscosity contrast, shear and elongational flow rate. We conclude with perspectives on timedependent flow, on shear-induced unbinding from surfaces, on the role of thermal fluctuations, and on applying the concepts of stochastic thermodynamics to these systems.Comment: 34 pages, 15 figure

Characterisation of aged HDPE pipes from drinking water distribution : investigation of crack depth by Nol ring tests under creep loading

International audienceHDPE pipes are used for the transport of drinking water. However, disinfectants in waterseem to have a strong impact on their mechanical behaviour, limiting their lifetime inoperation. Indeed, oxidation occurs when they are in contact with disinfectants leading to theformation of a thin oxidised layer coupled to the cracks initiation of cracks of different lengthsfrom the inner wall surface. An original method is proposed here to characterise the ageingeffect of the pipe mechanical behaviour. Inspired from the ASTM D 2290-04 standard, NolRing tests have been performed under tensile and creep loadings on smooth rings. Aconstitutive equation has been determined from these tests using a finite element (FE)modelling. FE simulations have been performed to study the influence of the thin oxidised PElayer. Precracked specimens with different crack depth ratio have also been modelled. Thecrack depth ratio is an important parameter to quantify pipe ageing

New Constraints from PAMELA anti-proton data on Annihilating and Decaying Dark Matter

Recently the PAMELA experiment has released its updated anti-proton flux and anti-proton to proton flux ratio data up to energies of ~200GeV. With no clear excess of cosmic ray anti-protons at high energies, one can extend constraints on the production of anti-protons from dark matter. In this letter, we consider both the cases of dark matter annihilating and decaying into standard model particles that produce significant numbers of anti-protons. We provide two sets of constraints on the annihilation cross-sections/decay lifetimes. In the one set of constraints we ignore any source of anti-protons other than dark matter, which give the highest allowed cross-sections/inverse lifetimes. In the other set we include also anti-protons produced in collisions of cosmic rays with interstellar medium nuclei, getting tighter but more realistic constraints on the annihilation cross-sections/decay lifetimes.Comment: 7 pages, 3 figures, 3 table

Dark matter annihilation and decay profiles for the Reticulum II dwarf spheroidal galaxy

The dwarf spheroidal galaxies (dSph) of the Milky Way are among the most attractive targets for indirect searches of dark matter. In this work, we reconstruct the dark matter annihilation (J-factor) and decay profiles for the newly discovered dSph Reticulum II. Using an optimized spherical Jeans analysis of kinematic data obtained from the Michigan/Magellan Fiber System (M2FS), we find Reticulum II's J-factor to be among the largest of any Milky Way dSph. We have checked the robustness of this result against several ingredients of the analysis. Unless it suffers from tidal disruption or significant inflation of its velocity dispersion from binary stars, Reticulum II may provide a unique window on dark matter particle properties.Comment: 5 pages, 4 figures. Match the ApJL accepted versio

Antimatter cosmic rays from dark matter annihilation: First results from an N-body experiment

[Abridged]. We take advantage of the galaxy-like 3D dark matter map extracted from the HORIZON Project results to calculate the positron and antiproton fluxes from dark matter annihilation, in a model-independent approach as well as for dark matter particle benchmarks relevant at the LHC scale (from supersymmetric and extra-dimensional theories). Such a study is dedicated to a better estimate of the theoretical uncertainties affecting predictions, while the PAMELA and GLAST satellites are currently taking data which will soon provide better observational constraints. We discuss the predictions of the antiproton and positron fluxes, and of the positron fraction as well, as compared to the current data. We finally discuss the limits of the Nbody framework in describing the dark matter halo of our Galaxy.Comment: 19 pages, 9 figures. Backgrounds included and additional comments and figures on the positron fraction. Accepted for publication in PR

Translation Representations and Scattering By Two Intervals

Studying unitary one-parameter groups in Hilbert space (U(t),H), we show that a model for obstacle scattering can be built, up to unitary equivalence, with the use of translation representations for L2-functions in the complement of two finite and disjoint intervals. The model encompasses a family of systems (U (t), H). For each, we obtain a detailed spectral representation, and we compute the scattering operator, and scattering matrix. We illustrate our results in the Lax-Phillips model where (U (t), H) represents an acoustic wave equation in an exterior domain; and in quantum tunneling for dynamics of quantum states

Cosmic Ray production of Beryllium and Boron at high redshift

Recently, new observations of Li6 in Pop II stars of the galactic halo have shown a surprisingly high abundance of this isotope, about a thousand times higher than its predicted primordial value. In previous papers, a cosmological model for the cosmic ray-induced production of this isotope in the IGM has been developed to explain the observed abundance at low metallicity. In this paper, given this constraint on the Li6, we calculate the non-thermal evolution with redshift of D, Be, and B in the IGM. In addition to cosmological cosmic ray interactions in the IGM, we include additional processes driven by SN explosions: neutrino spallation and a low energy component in the structures ejected by outflows to the IGM. We take into account CNO CRs impinging on the intergalactic gas. Although subdominant in the galactic disk, this process is shown to produce the bulk of Be and B in the IGM, due to the differential metal enrichment between structures (where CRs originate) and the IGM. We also consider the resulting extragalactic gamma-ray background which we find to be well below existing data. The computation is performed in the framework of hierarchical structure formation considering several star formation histories including Pop III stars. We find that D production is negligible and that a potentially detectable Be and B plateau is produced by these processes at the time of the formation of the Galaxy (z ~ 3).Comment: 9 pages, 7 figure