Nanoferroelectric perovskite oxides with unusual morphology produced by different synthesis procedures

We report in the present paper some original results of a joint research performed in the framework of the COST Action 539 ELENA. In search of higher miniaturisation of electroceramic devices a new outlook seems to arise from ceramics with unusual morphology that might present a new kind of circular or toroidal ferroelectric ordering of dipoles. Completely new perspectives in data storage can be expected if a close control of size confinement and dimensionality as well as of the chemical composition and the phase purity is reached. We succeeded in the fabrication of BaTiO3 hollow nanoparticles and nanowires, and Bi4Ti3O12 platelets. The use of soft chemistry and solid state methods allowed to produce coreshell powders and ferroelectric-ferromagnetic composites with completely new functional properties

Dense dielectric ceramics with local graded structure from core-shell particles: preparation and properties

The modification of the surface properties of particles by coating with a different material, resulting in the formation of core-shell structures, is a well-known process. However, the consolidation of core-shell particles in bulk ceramics has not been extensively investigated yet, mainly because of the difficulty in controlling interdiffusion and interface reactions. In this study, we have coated BaTiO(3) spherical templates with SrTiO(3) and BaZrO(3) using a precipitation process from inorganic precursors. The size of the particles as well as the overall composition can be tailored over a wide range. Densification of the resulting core-shell particles was accomplished either using conventional sintering or spark plasma sintering. Dense ceramics with a graded composition at the level of the single grains could only be obtained by careful choice of the sintering conditions. The final ceramics show strongly modified dielectric properties in comparison to both the parent compounds and the homogeneous solid solutions. The proposed approach is quite generic and suggests new possibilities for the realization of polycrystalline materials with local graded structure by the controlled sintering of core-shell particles

Inter-related magnetic and ferroelectric domain structures in BaTiO(3) - (Ni(0.5)Zn(0.5))Fe(2)O(4) multiferroic ceramics

Multiferroic ceramics (1-x)BaTiO(3)-x(Ni(0.5)Zn(0.5))Fe(2)O(4) with various compositions x are investigated in the present work. The processing parameters were adapted in order to obtain pure diphasic ceramics without reactions at the interfaces. The macroscopic ferroelectric behaviour was proved by the existence of the ferroelectric-paraelectric dielectric and calorimetric anomaly of BaTiO(3) around 125-130?C. The magnetic activity with a concentration influence ("dilution" effect) due to the presence of the non-magnetic phase was found by measuring the M(H) loops at various temperatures. The existence of both magnetic and ferroelectric domain structure and their interdependence was proved by local MFM/AFM-piezoresponse experiments

Preparation and characterisation of the Ba(Zr,Ti)O(3) ceramics with relaxor properties

Ba(Zr(x)Ti(1-x))O(3) ceramics with various compositions x in the range (0, 0.5) have been prepared via solid state reaction. Optimum parameters for calcination and sintering have been found in order to obtain pure perovskite phase and high density ceramics. The dielectric data showed a transition from ferroelectric towards relaxor state and a shift of the Curie temperature towards lower values with increasing x. Using the modified Landau model for relaxors, the local order parameter has been calculated. Its temperature dependence shows the increasing of the degree of diffuseness of the phase transition with increasing Zr with a maximum for the composition x=0.35. The model also shows that in the relaxor state the local order parameter has non-zero values even at a few hundreds degrees above the temperature corresponding to the maximum of the dielectric constant. Further, the dielectric data obtained for x=0.35 under field cooling (FC) and zero-field cooling (ZFC) conditions shows a splitting characteristic to the relaxors and spin-glass systems

Multiferroic and magnetoelectric properties of Pb0.99[Zr0.45Ti0.47(Ni1/3Sb2/3)0.08]O3–CoFe2O4 multilayer composites fabricated by tape casting

A 2-2 type multiferroic composite device encompassing three CoFe2O4 (CFO) layers confined between four Pb0.99[Zr0.45Ti0.47(Ni1/3Sb2/3)0.08]O3 (PZT) layers was fabricated by tape casting. X-ray diffraction data showed good chemical compatibility between the two phases, whereas Scanning Electron Microscopy imaging also revealed an intimate contact between CFO and PZT layers. Under an applied electric field of 65 kV/cm, this multilayer device shows a saturated polarisation of 7.5 C/cm2 and a strain of 0.12%, whereas under a magnetic field of 10 kOe it exhibits a typical ferromagnetic response and a magnetic moment of 33 emu/g. These devices can be electrically poled, after which they exhibit magnetoelectric coupling

Hysteresis and tunability characteristics of Ba(Zr,Ti)O(3) ceramics described by first order reversal curves diagrams

The First Order Reversal Curves (FORC) diagrams are proposed for the characterization of the switching process and the tunability in Ba(ZrxTi1-x)O(3) ceramics with various compositions x in the range (0, 0.5), prepared via solid state reaction. The changes induced by the compositional-induced crossover ferroelectric-to-relaxor state are investigated by monitoring the changes of the FORC diagrams (the coercive and bias fields corresponding to the maximum, ratio of the reversible/irreversible contribution to the polarization, the diffuse character of the FORC distribution). The first derivative of the FORCs related to the tunability is a function of both the applied and reversal fields. The critical fields for the highest tunability were found to be composition-dependent

BaTiO(3)-(Ni(0.5)Zn(0.5))Fe(2)O(4) ceramic composites with ferroelectric and magnetic properties

No abstract availabl

Yttrium Iron Garnet/Barium Titanate Multiferroic Composites

Dense multiferroic 0-3 type composites encompassing BaTiO3 and Y3Fe5O12 were fabricated by the solid state reaction method. X-ray diffraction data combined with Scanning Electron Microscopy imaging show virtual immiscibility between the two phases, with the Y3Fe5O12 ferrimagnetic phase well dispersed in the tetragonal BaTiO3 ferroelectric matrix. Raman spectroscopy analyses corroborate the polar nature of the BaTiO3 matrix in composites with a Y3Fe5O12 content as great as 40 wt%. Ferrimagnetism is detected in all composites and no additional magnetic phases are distinguished. Although these dense ceramics can be electrically poled, they exhibit a very weak magnetoelectric response, which slightly increases with Y3Fe5O12 content

Test of the Kolmogorov-Johnson-Mehl-Avrami picture of metastable decay in a model with microscopic dynamics

The Kolmogorov-Johnson-Mehl-Avrami (KJMA) theory for the time evolution of the order parameter in systems undergoing first-order phase transformations has been extended by Sekimoto to the level of two-point correlation functions. Here, this extended KJMA theory is applied to a kinetic Ising lattice-gas model, in which the elementary kinetic processes act on microscopic length and time scales. The theoretical framework is used to analyze data from extensive Monte Carlo simulations. The theory is inherently a mesoscopic continuum picture, and in principle it requires a large separation between the microscopic scales and the mesoscopic scales characteristic of the evolving two-phase structure. Nevertheless, we find excellent quantitative agreement with the simulations in a large parameter regime, extending remarkably far towards strong fields (large supersaturations) and correspondingly small nucleation barriers. The original KJMA theory permits direct measurement of the order parameter in the metastable phase, and using the extension to correlation functions one can also perform separate measurements of the nucleation rate and the average velocity of the convoluted interface between the metastable and stable phase regions. The values obtained for all three quantities are verified by other theoretical and computational methods. As these quantities are often difficult to measure directly during a process of phase transformation, data analysis using the extended KJMA theory may provide a useful experimental alternative.Comment: RevTex, 21 pages including 14 ps figures. Submitted to Phys. Rev. B. One misprint corrected in Eq.(C1