New column configurations for pressure swing batch distillation I. Feasibility Studies

The feasibility of the pressure swing distillation in different batch column configurations is investigated. The method is based on the assumption of maximal separation. Besides studying the well known batch configurations (rectifier, stripper, middle vessel column) we also suggest two novel configurations such as double column batch rectifier and double column batch stripper. We also study the alternate application of a rectifier and a stripper

Entrainer selection for pressure swing batch distillation

The feasibility of the separation of binary homoazeotropes with pressure swing batch distillation by the application of an entrainer is studied. The feasibility studies are based on the assumption of maximal separation and on the analysis of batch distillation/stripping regions and the vessel path in the residue curve map of the ternary mixture. The following configurations are investigated: batch rectifier, batch stripper, double column batch rectifier and double column batch stripper. Rules for the selection of an entrainer are suggested

Simulation of a new Pressure Swing Batch Distillation System

The operation and performance of a new pressure swing batch distillation configuration is investigated by rigorous simulation calculations. A maximum boiling point azeotrope is separated in a double column batch rectifier. We study the influence of the main operational parameters and determine the optimal value of these parameters. The calculation results are presented for the mixture water (A) – ethylene-diamine (B)

A kiterjesztett könyvtár – Az AR lehetőségei a tartalomszolgáltatásban = The expanded library – The opportunities of the AR in content-management

In the 21st century, library content services provide users with many repositories and databases, resulting in millions of pages of documents accessible online. Although access to information has become much simpler than it was in previous years, there is still a development potential in the methods of access to library contents. Therefore, modern technology allows for the opening of new ways to enable the provision of this accumulated knowledge. There are several solutions, most of them being applied in the entertainment industry today but in the near future, they might be suitable for libraries, as well. Augmented reality is such an opportunity. The purpose of the paper is to present the technological possibilities and how they can be adapted in the library world. It also presents an application developed in the University of Szeged Klebelsberg Library and it shows how this technology can help our users, researchers and librarians work, as well

New double column system for heteroazeotropic batch distillation

A new double column system (DCS) operated in closed mode is suggested for heterogeneous batch distillation. This configuration is investigated by feasibility studies based on the assumption of maximal separation and is compared with the traditional batch rectifier (BR). We study the configurations also by dynamic simulation based on a detailed model using a professional simulator. For the new configuration the minimal duration of the process is determined. The influence of the most important operational parameters is studied. The calculations and the simulations are performed for a binary (n-butanol–water) and for a ternary heteroazeotropic mixture (isopropanol–water + benzene as entrainer). One of the advantages of the DCS is that distillation of binary and ternary systems is performed in only one step. Furthermore the recovery of components is usually higher and the amount of byproducts is lower

Új szakaszos heteroazeotróp rektifikáló rendszer vizsgálata részletes modellezéssel | Rigorous simulation of a new batch heteroazeotropic distillation configuration

A megvalósíthatósági vizsgálatok kedvező eredményei alapján az új kétoszlopos szakaszos heteroazeotróp desztillációs konfigurációra dinamikus szimulátorral részletes modellező számításokat is végzünk. Az új konfiguráció teljesítményét összehasonlítjuk a hagyományos szakaszos rektifikálóéval. Meghatározzuk az új konfiguráció minimális üzemidejét. Megvizsgáljuk a legfontosabb működési paraméterek hatását. A szimulációs számításokat egy binér (n-butanol – víz) és egy terner (izopropil-alkohol – víz + benzol) heteroazeotróp elegyre végezzük el. | On the basis of the favourable results of the feasibility studies performed for the new double-column batch heteroazeotropic distillation configuration we investigated this configuration also by rigorous simulation using the dynamic simulator of CHEMCAD (program CC-DCOLUMN). The column sections were modelled by the module DYNAMIC COLUMN, the reboilers and decanter by the DYNAMIC VESSEL, respectively (Fig. 1). The following simplifying assumptions were applied: - theoretical trays, - constant volumetric liquid holdup on the trays, - negligible vapour holdup, - negligible duration of pumping of the distillate from the product tank to the reboiler between the two steps (BR). We compared the performance of the new configuration with that of the conventional batch rectifier (BR). The total number of trays and and the total heat duty of the two columns of the new configuration was taken equal to those of the BR. For the new configuration we determined the minimal operational time (in the case where both products reach the purity prescribed at the same time). We varied the division of the total number of trays, total amount of feed, total heat duty, as well as the amount of the entrainer (in the case of the ternary mixture). The simulations were performed for a binary (n-butanol - water) and for a ternary heteroazeotropic mixture (isopropyl-alcohol – water + benzene). By the binary mixture we investigated the cases when the mixture contains one of the components in such amount that the mixture is homogeneous and also the heterogeneous case. In Fig. 2 the evolution of liquid compositions in the reboilers is shown for both configurations for the ternary mixture. The new configuration – in accordance with the results of feasibility studies – proved competitive with the BR: it gave slightly better results for the ternary mixture and similar results for the binary mixture, respectively

Azeotropokat tartalmazó terner elegy elválasztása szakaszos nyomásváltó desztillációval

Egy, két binér minimális azeotropot tartalmazó terner elegy (n-pentán-aceton-c-hexán) nyomásváltó szakaszos desztillációval (NYVSZD) történő szétválaszthatóságát tanulmányozzuk megvalósít-hatósági vizsgálatokkal és részletes modellező számításokkal. A megvalósíthatósági vizsgálatokkal, mely a maradékgörbe térképek elemzésén alapulnak, meghatározzuk az egyes kolonna konfigurációknál (egy és két oszlopos szakaszos sztripper) alkalmazandó műveleti lépéseket. A részletes modellezést professzionális dinamikus folyamat-szimulátorral végezzük. A számításokat ipari méretű berendezésekre végezzük. A dupla kolonnás szakaszos sztripper berendezésre két üzemviteli módot hasonlítunk össze. | The separation of a ternary mixture (n-pentane-acetone-cyclo-hexane) with two binary minimum azeotropes is studied by feasibility studies and rigorous simulation calculations. By the feasibility studies based on the analysis of the vessel paths in the residue curve maps at the two different pressures (PI, PII) the separation steps are determined for the two configurations studied (batch stripper (BS), double column batch stripper (DCBS)). The rigorous calculations are performed by the CCDColumn professional dynamic flow-sheet simulator. For the DCBS two operational policies are compared: 1. The production is begun in each column immediately when the bottoms reaches its prescribed purity. 2. The production is begun in both columns at the same time (when both bottoms have already reached the prescribed purity.) For both operational policies the optimal distribution of the liquid (η=LI/Ltotal) leaving the common top vessel between the two columns, for which the energy consumption is minimal is determined. Policy 1 gave more favourable results (lower energy consumption, wider operating region)

Separation of ternary homoazeotropic mixture by pressure swing distillation

The separation of a ternary mixture (n-pentane-acetone-cyclo-hexane) with two binary minimum azeotropes is studied by feasibility studies and rigorous simulation calculations. By the feasibility studies based on the analysis of the vessel paths in the residue curve maps at the two different pressures (PI, PII) the separation steps are determined for the two configurations studied (batch stripper (BS), double column batch stripper (DCBS)). The rigorous calculations are performed by the CCDColumn professional dynamic flow-sheet simulator. For the DCBS two operational policies are compared

Új kolonna konfigurációk nyomásváltó szakaszos desztillációhoz I. Megvalósíthatósági vizsgálatok | New column configutations for pressure swing batch distillation I. Feasibility Studies

Megvalósíthatósági vizsgálatokat végeztünk különböző szakaszos kolonna konfigurációkra nyomásváltó desztillációra. A számításokat maximális szétválasztást feltételezve végeztük. A jól ismertek (rektifikáló, szakaszos sztripper, középső tartályos oszlop) vizsgálata mellett két új konfigurációra (kétkolonnás szakaszos rektifikáló és a kétkolonnás szakaszos sztripper) is javaslatot tettünk. Megvizsgáltuk a rektifikálás és sztippelés időben váltakozó alkalmazását is

Új kolonna konfigurációk nyomásváltó szakaszos desztillációhoz II. Részletes számítások | New column configurations for pressure swing batch distillation II. Rigorous Simulation

Részletes számításokat végeztünk különböző szakaszos kolonna konfigurációkra nyomásváltó desztillációra. A számításokat egy professzionális folyamatszimulátort használva végeztük minimális (etanol-toluol) és maximális forráspontú (víz-etilén-diamin) azeotrop elegyekre. A jól ismertek (rektifikáló, szakaszos sztripper, középső tartályos oszlop) vizsgálata mellett két új konfigurációra (kétkolonnás szakaszos rektifikáló és a kétkolonnás szakaszos sztripper) is javaslatot tettünk. Megvizsgáltuk a rektifikálás és sztippelés időben váltakozó alkalmazását is. Végül összehasonlítottuk a különböző konfigurációkat. | The pressure swing distillation in different batch column configurations is investigated by rigorous simulation calculations. The calculations are made by a professional flow-sheet simulator for the separation of a minimum (ethanol–toluene) and a maximum boiling (water– ethylene-diamine) azeotropic mixture. Besides studying the well known configurations (rectifier, stripper) we also investigate two novel configurations such as double column batch rectifier and double column batch stripper. The alternate application of a batch rectifier and a batch stripper is also studied. The different column configurations are compared