Thermodynamic, rheological and structural properties of edible oils structured with LMOGs: Influence of gelator and oil phase

Supplementary data associated with this article can be found, in the online version, at https://doi.org/10.1016/j.foostr.2018.03.003.The effect of different oil phases and low molecular weight organogelators (LMOGs) structures on edible oils was investigated through differential scanning calorimetry (DSC), rheology and small-angle X-ray scattering (SAXS). Different gelators (glyceryl tristearateGT; sorbitan tristearateST; sorbitan monostearateSM and glyceryl monostearate-GM) were tested in medium-chain triglycerides and high oleic sunflower (named MCT and LCT). Systems were thermoreversible and their thermodynamic properties were dependent on the combined effect of the interactions of structurants polar head with other constituents and the sterical effect of their hydrophobic tails. The crystallization onset temperature was higher for GM and SM, possibly due to the lower sterical effect of their tails. However, the corresponding enthalpy and entropy change values were influenced by the hydrophilic head group: glycerol-based organogelator molecules were able to interact strongly than sorbitans, increasing these values. Rheological studies showed that gels produced with LCT were stronger than with MCT. Moreover, cooling and heating cycles showed more than one transition and shear dependence. Stronger structures were more sensitive to temperature, possibly because of their more organized structure that destabilizes more easily with the increase of molecular mobility. These results were in agreement with the SAXS analyses. At 50°C, the stronger networks lost their initial structure, and at 70°C they collapsed. Thus, molecular interactions and structurant self-assembly were dependent on the structurant+solvent combination, leading to different physicochemical properties and thermal stability. It is expected that these results will allow customizing properties of structured oil for diverse applications, spanning from food to cosmetic and pharmaceutical industries.LuizH.FasolinthanksthescholarshipCapes/FCTprogram(349/13) for the research exchange and Rosiane Lopes Cunha thanks CNPq (CNPq 307168/2016-6) for the productivity grant. The authors also would like to thank Fapesp (EMU 09/54137-1), CNPq and Capes for their financial support and the Brazilian Synchrotron Light Laboratory (LNLS) for the opportunity to carry out SAXS measurements. This study was also supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/ 04469/2013 unit and COMPETE 2020 (POCI-01-0145-FEDER-006684) and BioTecNorte operation (NORTE-01-0145-FEDER-000004) funded by the European Regional Development Fund under the scope of Norte2020 – Programa Operacional Regional do Norte. and of the Project RECI/BBB-EBI/0179/2012 (FCOMP-01-0124-FEDER-027462).info:eu-repo/semantics/publishedVersio

Biopolymer-based structuring of liquid oil into soft solids and oleogels using water-continuous emulsions as templates

Physical trapping of a hydrophobic liquid oil in a matrix of water-soluble biopolymers was achieved using a facile two-step process by first formulating a surfactant-free oil-in-water emulsion stabilized by biopolymers (a protein and a polysaccharide) followed by complete removal of the water phase (by either high- or low-temperature drying of the emulsion) resulting in structured solid systems containing a high concentration of liquid oil (above 97 wt %). The microstructure of these systems was revealed by confocal and cryo-scanning electron microscopy, and the effect of biopolymer concentrations on the consistency of emulsions as well as the dried product was evaluated using a combination of small-amplitude oscillatory shear rheometry and large deformation fracture studies. The oleogel prepared by shearing the dried product showed a high gel strength as well as a certain degree of thixotropic recovery even at high temperatures. Moreover, the reversibility of the process was demonstrated by shearing the dried product in the presence of water to obtain reconstituted emulsions with rheological properties comparable to those of the fresh emulsion

Impact of acidification and protein fortification on thermal properties of rice, potato and tapioca starches and rheological behaviour of their gels

Producción CientíficaThe impact of acidification and non-gluten protein fortification (egg-albumin and soy-protein isolate) on thermal transitions of rice, potato and tapioca starches as well as the viscoelastic properties of their gels prepared at two casting temperatures, 90ºC and 120ºC, was investigated. The thermal and rheological behaviour of starches depended on their botanical origin and were significantly influenced by the presence and type of protein added as well as by the pH of the aqueous dispersion. Acidification to pH 4.5 increased the gelatinization temperature of rice starch in the presence of albumin or soy proteins, while reduced it in the case of tapioca starch, regardless of the presence of proteins. Acidification of rice starch dispersions decreased significantly the apparent gelatinization enthalpy; this effect was even greater in the presence of proteins. The addition of proteins brought about a structuring effect on tapioca gels leading to higher viscoelastic moduli and lower tan δ values. In general, acidification led to weaker gel structures, with more pronounced effect for potato starch, most likely related to its higher phosphate content (charge screening). Much weaker gels were obtained at 120ºC compared to those processed at lower temperatures; however, protein incorporation reinforced gel structure, an effect that was not observed in gels formed at 90º, as also revealed by microstructure analysis using confocal scanning laser microscopy. In conclusion, protein addition and pH adjustments of aqueous starch dispersions can provide an effective means to modulate the functional and textural properties of gel-like starch-based gluten-free formulations.Ministerio de Economía, Industria y Competitividad - FEDER (Projects AGL2012-35088 and AGL2015-63849-C2-2-R)Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA072P17

Emulsified lipids: formulation and control of end-use properties

In many practical applications including foods, cosmetics, pharmaceuticals, etc., lipids are emulsified in an aqueous phase in the presence of surface-active molecules and other additives like thickening/gelling agents. Once fabricated, the emulsions may exhibit all kinds of rheological behaviors from viscous fluid to elastic pastes, and transitions: reversible phase transitions as a result of droplet interactions that may be modified to a large extent, and irreversible transitions that generally involve their destruction. Besides the predominance of empiricism in controlling most of the end-use properties, the scientific background of emulsions is progressing. In this paper we aim to review some advances concerning the control of the structure, the texture (rheological properties) and the ageing of emulsions

Protein-based structures for food applications: from macro to nanoscale

Novel food structures' development through handling of macroscopic and microscopic properties of bio-based materials (e.g., size, shape, and texture) is receiving a lot of attention since it allows controlling or changing structures' functionality. Proteins are among the most abundant and employed biomaterials in food technology. They are excellent candidates for creating novel food structures due to their nutritional value, biodegradability, biocompatibility, generally recognized as safe (GRAS) status and molecular characteristics. Additionally, the exploitation of proteins' gelation and aggregation properties can be used to encapsulate bioactive compounds inside their network and produce consistent delivery systems at macro-, micro-, and nanoscale. Consequently, bioactive compounds which are exposed to harsh storage and processing conditions and digestion environment may be protected and their bioavailability could be enhanced. In this review, a range of functional and structural properties of proteins which can be explored to develop macro-, micro-, and nanostructures with numerous promising food applications was discussed. Also, this review points out the relevance of scale on these structures' properties, allowing appropriate tailoring of protein-based systems such as hydrogels and micro- or nanocapsules to be used as bioactive compounds delivery systems. Finally, the behavior of these systems in the gastrointestinal tract (GIT) and the impact on bioactive compound bioavailability are thoroughly discussed.JM and AP acknowledge the Portuguese Foundation for Science and Technology (FCT) for their fellowships (SFRH/BPD/89992/2012 and SFRH/BPD/101181/2014). This work was supported by Portuguese FCT under the scope of the Project PTDC/AGR-TEC/5215/2014, of the strategic funding of UID/BIO/04469 unit and COMPETE 2020 (POCI-01-0145-FEDER-006684), and BioTecNorte operation (NORTE-01-0145-FEDER-000004) funded by the European Regional Development Fund under the scope of Norte2020—Programa Operacional Regional do Norte.info:eu-repo/semantics/publishedVersio