Integrating vocational training in culinary arts and Islamic studies at juvenile rehabilitation centres: Malaysian experience

The Juvenile Rehabilitation Centres (JRC) in Malaysia aims to provide shelter, counselling and skills training to juveniles specifically for those who wish to transform themselves from the regrettable misdeeds they have committed. At JRCs, an integrated Culinary Vocational Training and Islamic education forms part of their training curriculum. The skills acquired should enable trainees to secure jobs upon completion of training. However, there are some training institutions that lack systematic training structures resulting in trainees becoming less skilful in both vocational and Islamic education. The objective of this research is to identify the effectiveness of an integrated Culinary and Islamic Education curriculum implemented at JRCs in Malaysia. This is a descriptive survey and data was obtained using questionnaire and interview. Respondents comprised 92 trainees, four managers, four culinary trainers and four Islamic education teachers, all from four different JRCs. The findings show that the trainees are happy with their trainings that brought about positive effects for them. Some suggestions have been made to provide improvements in the implementation of the course among them the inclusion of prayers in the Islamic education syllabus

Integrating vocational training in culinary arts and Islamic studies at juvenile rehabilitation centres: Malaysian experience

The Juvenile Rehabilitation Centres (JRC) in Malaysia aims to provide shelter, counselling and skills training to juveniles specifically for those who wish to transform themselves from the regrettable misdeeds they have committed. At JRCs, an integrated Culinary Vocational Training and Islamic education forms part of their training curriculum. The skills acquired should enable trainees to secure jobs upon completion of training. However, there are some training institutions that lack systematic training structures resulting in trainees becoming less skilful in both vocational and Islamic education. The objective of this research is to identify the effectiveness of an integrated Culinary and Islamic Education curriculum implemented at JRCs in Malaysia. This is a descriptive survey and data was obtained using questionnaire and interview. Respondents comprised 92 trainees, four managers, four culinary trainers and four Islamic education teachers, all from four different JRCs. The findings show that the trainees are happy with their trainings that brought about positive effects for them. Some suggestions have been made to provide improvements in the implementation of the course among them the inclusion of prayers in the Islamic education syllabus

Fluorescence spectroscopy for analysing deterioration of palm olein in batch deep-fat frying

Palm olein has been commercially used as frying medium in batch deep-fat frying. During frying, the oil usually deteriorates due to the exposure to high temperature. In this study, a fluorescence spectroscopy technique was applied to monitor the deterioration of refined, bleached, and deodorized palm olein (RBDPO) in batch deep-fat frying. 22.5 kg of French fries were used as the frying material. In 30 batches, the french fries were intermittently fried at 185 ± 5°C for eight hours a day over five consecutive days capturing 40 hours. The fluorescence intensity of the RBDPO was recorded with excitation at 390 nm and resulting emission of 465 nm. The fluorescence intensity of the RBDPO over five days of frying decreased considering the wavelength range of emission 430-640 nm and excitation 360-430 nm. The decreased in intensity of fluorescence emission and excitation spectra were inversely correlated with the FFA content of the oil samples. This study demonstrates the potential of fluorescence spectroscopy in monitoring the deterioration of RBDPO during batch deep-fat frying

Optical and electrical characteristics of (LiCl)x(P2O5)1-x glass.

Homogeneous (LiCl) x (P2O5)1 − x glasses were synthesised using a melt-quenching method for x = 0.1–0.6 in the interval of 0.05. The amorphous structure of the samples was evident by the X-ray diffraction spectrum. The short range structures of the binary phosphate samples were examined by Fourier transform infrared spectroscopy, whilst the density of the samples was measured as supportive data for the investigations. The results of refractive indices as measured using an ellipsometer reveal the homogeneity of samples and was found to depend on the glass composition. The electrical properties of the glasses were investigated by ac impedance spectroscopy from 10 mHz to 1 MHz for temperatures ranging from room temperature to 573 K. An estimation of the bulk resistivity was obtained by taking the intercepts on the real axis at low frequencies of the complex impedance plot. The dc conductivities derived from the reciprocal of resistivity values were found to obey the Arrhenius relationship, and its activation energy shows a decreasing trend with the increase in LiCl content in the glass. Lastly, an equivalent circuits consisting of real and complex capacitors is proposed to describe the dielectric response of the glass

Low loss waveguide-based Butler matrix with iris coupling control method for millimeterwave applications

This paper proposes a low loss 4×4 Butler matrix based on rectangular waveguide cavity resonators technology for millimeterwave beamforming network using iris coupling method. This method has the advantage of controlling the electrical fields and the coupling factor inside a complex medium such as waveguide cavity resonators. The coupling factor of 6 dB for 4×4 Butler matrix is achieved by tuning the iris coupling k-value between the waveguide cavity resonators. Thus, avoiding a higher phase difference losses and component losses at upper millimeterwave bands. To validate the proposed method, CST software simulations are performed under several iris coupling k-values to achieve a 6 dB coupling factor. Then, the proposed 4×4 Butler matrix is 3D metal printed using selective laser melting (SLM) technique. The measured reflection and isolation coefficients are observed below −10 dB, with coupling coefficients ranging between −6 and −7 dB. The phase differences of −42.02°, 42.02°, −130.95°, and 133.3° are achieved at the outputs. It confirmed that using this proposed method has the superiority over the conventional microstrip and waveguide coupling methods by a 1 dB coupling factor loss and a 3° phase difference error

Ovarian activity in beef and dairy cows with prolonged postpartum period and heifers that fail to conceive

The primary objectives of this study were to investigate incidence of abnormal ovarian cyclicity (AOC) and its type in dairy and beef cows with prolonged postpartum period (>90 days) and in heifers that fail to conceive. A total of 53 animals were included in the study: 17 Friesian crosses, 16 Braford crosses, eight Brangus crosses, and 12 local Kedah-Kelantan (KKX) crosses. These animals were initially checked for absence of pregnancy via palpation per rectum. Blood samples for progesterone analysis were obtained twice a week for 2 to 3 months following their spontaneous oestrous cycle, and all animals were rechecked for pregnancy at the end of the study. Progesterone analysis indicated that 33.9% of the total animals were having AOC: 18.9% with cessation of ovarian cyclicity, 9.4% with prolonged luteal phases (PLP), and 5.7% short luteal phases. The highest incidence was observed in Brangus crosses (62.5%), followed by Braford crosses (43.8%), and Friesian crosses (35.3%). In contrast, no AOC was observed in the local KKX breeds, and all of them were found to be pregnant at the end of the study. A significant difference (p  0.05), Friesian crosses showed a higher percentage incidence of AOC than beef cows (40% vs 36.4%), with major types being PLP (26.7%) in dairy and cessation of ovarian cycle (27.3%) in beef cows. Compared with beef heifers, beef cows showed a higher percentage of AOC (36.4% vs 28.6%) where again, cessation of cyclicity was the predominant abnormality. In conclusion, AOC reflected by abnormal endocrine pattern is a possible cause of reduction in fertility for dairy and beef cows beyond 90 days postpartum and heifers that fail to conceive

Effects of concurrent TeO2 reduction and ZnO addition on elastic and structural properties of (90 − x)TeO2–10Nb2O5–(x)ZnO glass

Niobium-containing tellurite glass with starting composition of (90 − x)TeO2–10Nb2O5–(x)ZnO (x = 0–15 mol%) have been prepared by melt-quenching method and the effect of reduction of TeO2 with simultaneous increase in ZnO on elastic properties was studied. Ultrasonic longitudinal and shear velocity showed initial decrease of 3.52% and 2.37%, respectively, at x = 5 mol%. For x > 5 mol%, longitudinal velocity showed weak recovery but shear velocity showed steady recovery with ZnO and recorded 0.95% increase in value at x = 15 mol% compared to x = 0 sample. Shear and Young's moduli recorded similar drop at x = 5 mol% followed by strong recovery at x > 5 mol%, while longitudinal and Bulk modulus showed weak and no recovery, respectively, with x. Infrared (IR) absorption spectra showed increase in intensity of NbO6-assigned peak accompanied by increase in intensity of ZnO4 tetrahedra and TeO4 trigonal bipyramid (tbp) assigned peaks indicating formation of both non-bridging oxygen, NBO and bridging oxygen, BO, respectively, with addition of ZnO. The initial drop in ultrasonic velocity and related elastic moduli observed at x = 5 mol% indicates weakening of network rigidity of the glass system due to structural modification as a direct effect of TeO2 reduction and existence of NBO. However, further replacement of TeO2 by ZnO at x > 5 mol% contributed to increase in BO causing rigidity of the glass network to improve. In addition, hardness, H, was observed to increase with ZnO indicating increase in connectivity of the glass network while Poisson's ratio, σ, decreased indicating increase in cross-link density of the glass system. The combined results of ultrasonic velocity and IR absorption spectra suggest that the role of TeO2 is very critical in the ternary glass system as, although ZnO addition showed improved rigidity due to recovery of shear modulus, the weakening of longitudinal and Bulk moduli indicates ZnO is not fully effective as glass former in place of TeO2

Optical properties of ternary TeO2-B2O3-ZnO glass system.

A series of ternary tellurite based glasses [(TeO2)70 (B203)30]100-x [ZnO]x glasses with different compositions of ZnO (x= 5 to 30 wt.% in steps of 5 wt.%) have been synthesized by melt quenching method. The role of ZnO to the glasses structure was studied by IR spectroscopy. FTIR spectra revealed broad, weak and strong absorption bands in the investigated range of wavenumber from 280-4000 cm-1 which associated with their corresponding bond modes of vibration and the glass structure. The indirect optical band gap and the direct optical band gap are in the range 2.08-3.12 and 1.54-2.36 eV, respectively. A decrease in the values of energy band gap Eg may come down to the reason that the non-bridging oxygen ion content increases with increasing ZnO content and shifting the band edge to lower energies. The optical band gap and Urbach energies were calculated from the absorption spectra measured between 190 and 900 nm at room temperature. The refractive index, n of the glasses change from 1.84-2.00 while the molar refractivities decrease from 13.06 to 12.00 with the increase of ZnO in mol%

A cross-sectional study of hypertensive outpatients to determine the necessity of asking about erectile dysfunction symptoms.

Background: Erectile dysfunction (ED) is common amongst hypertensive men. Hypertensive patients often attribute it to antihypertensive drugs, although conflicting evidence linking ED with antihypertensive medication exists. The objectives were to determine the prevalence and severity of ED, the type of treatment sought, and the risk factors for ED among hypertensive men. Method: A cross-sectional survey conducted over six months from June to November 2008 at University Kebangsaan, Malaysia Medical Centre, Kuala Lumpur. Inclusion criteria included hypertensive men above 30 years old, with essential hypertension for at least three months. We excluded diabetics, a history of pelvic surgery and known psychiatric illnesses. The International Index of Erectile Function-5 (IIEF-5) assessment was used with a standardised checklist. We analysed data using SPSS, to assess the prevalence and association of ED with selected variables. Results: Of the 200 participants screened, 35.5% perceived that they had ED. However, prevalence increased to 69% after screening using an IIEF-5 questionnaire. Forty-eight per cent were reported to have moderate-tosevere ED. ED was significantly associated with age (p-value = 0.0001). No significant associations were found between ED and the duration of the hypertension (p-value = 0.505), hypertension control (p-value > 0.05), smoking status (p-value = 0.858) or number of antihypertensive medication taken (p-value > 0.05). Among perceived and proven ED patients, traditional medicines were mainly used for treatment (18.3% and 17.2% respectively). Conclusion: ED is a problem among hypertensive patients. It was associated with age but not with hypertension duration, control, number of antihypertensive drugs or smoking. Physicians should enquire about ED symptoms in hypertensive patients, as most of them resorted to self-treatment with traditional medicines

Evaluation on physico-chemical properties of pink guava puree residue as bioresource

Pink Guava Puree (PGP) factory produces tons of residues from its unit operation [refiner (R), siever (S), and decanter (D)]. These residues represent a waste of nutrients and can contribute to environmental problem. However, it can benefit related industries if the properties of the residues are known. Thus, this research aims to determine the compositions of the residues from PGP processing factory in order to evaluate possible value-added by-product and energy sources. The residues from each unit operation were being tested for proximate composition, dietary fibre components, pH value, emulsifying activity (EA) and emulsifying stability (ES), carbon-to-nitrogen (C/N) ratio, and sugar analysis. The sugar content was analysed using High Performance Liquid Chromatography (HPLC-RI detector). Results showed that the residues have good composition of carbohydrate (11.82–12.18%), and thus potential as carbon source and can be a good substrate for fermentation. These residues may also benefit the food industry as a good source of dietary fibre (18.63–29.86%). The pH value for these PGP residues is 4; thus they were considered as acidic food by-product. The low pH value also contributed to the low EA and ES value other than the low content of protein in the sample. C/N ratio for PGP residue from R (46:1) is the lowest compared to the C/N ratio from S (84:1) and D (115:1). The amount of sugars detected in the PGP residues in descending order were fructose > glucose > sucrose