The effect of loading direction and Sn alloying on the deformation modes of Zr: An in-situ neutron diffraction study

Deformation modes (slip and twining) in a strongly textured model hcp alloy system (Zr–Sn) have been investigated using in-situ neutron diffraction and deformation along with complementary electron microscopy. Analysis of the evolution of the intergranular strain evolutions and intensity of specific reflections from neutron diffraction show differential influence of Sn on the extent of twinning too, depending on the deformation direction. While Sn displayed very noticeable influence on twin activity when samples were compressed along a direction that predominantly activates prismatic slip, this effect was not seen when samples were compressed along other different directions. These experimental observations were successfully simulated using a CPFE (crystal plasticity finite element) model that incorporates composition sensitive CRSS (critical resolved shear stress) for slip and composition insensitive CRSS activation of twinning. The success of the CPFE model in capturing the experimental observations with respect to twin evolution suggests that the twinning in Zr is chiefly governed by the initial crystallographic texture and the associated intergranular stress state generated during plastic deformation

Measurement and modelling of the residual stresses in autogenous and narrow gap laser welded AISI grade 316L stainless steel plates

Thick-section austenitic stainless steels have widespread industrial applications, where stress-corrosion cracking is often of major concern. Problems tend to arise in the vicinity of welds, where substantial residual stresses often reside. This paper describes an investigation into the residual stresses in autogenous high power laser welds and narrow gap laser welds (NGLW) in 10 mm thick AISI grade 316L steel plates, using both neutron diffraction and the contour method. The influences of laser power, welding speed and the time interval between weld passes on residual stress were analysed. For the NGLW process, finite element modelling was employed to understand the influence of thermal history on residual stress. The results for the NGLW technique show that the laser power has a significant effect on the peak value of residual stress, while the welding speed has a more significant influence on the width of the region sustaining tensile stresses

Long‐Term Retinal Differentiation of Human Induced Pluripotent Stem Cells in a Continuously Perfused Microfluidic Culture Device

Understanding how microenvironmental cues influence cellular behavior will enable development of efficient and robust pluripotent stem cell differentiation protocols. Unlike traditional cell culture dishes, microfluidic bioreactors can provide stable microenvironmental conditions by continuous medium perfusion at a controlled rate. The aim of this study is to investigate whether a microfluidic culture device could be used as a perfused platform for long‐term cell culture processes such as the retinal differentiation of human induced pluripotent stem cells. The perfusion flow rate is established based on the degradation and consumption of growth factors (DKK‐1, Noggin, IGF‐1, and bFGF) and utilizing the Péclet number. The device's performance analyzed by qRT‐PCR show improvements compared to the well‐plate control as characterized by significantly higher expression of the markers Pax6, Chx10, and Crx on Day 5, Nrl on day 10, Crx, and Rhodopsin on day 21. Optimization of perfusion rate is an important operating variable in development of robust processes for differentiation cultures. Result demonstrates convective delivery of nutrients via perfusion has a significant impact upon the expression of key retinal markers. This study is the first continuously perfused long‐term (21 days) retinal differentiation of hiPSCs in a microfluidic device

Conical refraction with low-coherence light sources

We report on conical refraction (CR) with low-coherence light sources, such as light-emitting diodes and decoherentized HeNe laser radiation, and demonstrate different CR patterns. In our experiments, a variation of the pinhole sizes from 25 to 100 µm and the distances to pinhole from 50 to 5 cm reduced spatial coherence of radiation that resulted in the disappearance of the dark Poggendorff’s ring in the Lloyd’s plane. This is attributed to the interference nature of the Lloyd’s distribution and found to be in excellent agreement with the paraxial dual-cone model of conical refraction

Runoff variations in Lake Balkhash Basin, Central Asia, 1779-2015, inferred from tree rings

Long highly-resolved proxies for runoff are in high demand for hydrological forecasts and water management in arid Central Asia. An accurate (R2 = 0.53) reconstruction of October-September discharge of the Ili River in Kazakhstan, 1779–2015, is developed from moisture-sensitive tree rings of spruce sampled in the Tian Shan Mountains. The fivefold extension of the gauged discharge record represents the variability of runoff in the Lake Balkhash Basin for the last 235 years. The reconstruction shows a 40 year long interval of low discharge preceded a recent high peak in the first decade of the 2000s followed by a decline to more recent levels of discharge not seen since the start of the gauged record. Most reconstructed flow extremes (± 2σ) occur outside the instrumental record (1936–2015) and predate the start of large dam construction (1969). Decadal variability of the Ili discharge corresponds well with hydrological records of other Eurasian internal drainages modeled with tree rings. Spectral analysis identifies variance peaks (highest near 42 year) consistent with main hemispheric oscillations of the Eurasian climatic system. Seasonal comparison of the Ili discharge with sea-level-pressure and geopotential height data suggests periods of high flow likely result from the increased contribution of snow to runoff associated with the interaction of Arctic air circulation with the Siberian High-Pressure System and North Atlantic Oscillation