Early stages of the HFCVD process on multi-vicinal silicon surfaces studied by electron microscopy probes (SEM, TEM)

In this paper, we show that silicon dimples are suitable samples to study diamond nucleation on a controlled distribution of defects by SEM FEG and HRTEM observations. Indeed, multi-vicinal surfaces generated by a UHV thermal treatment have been characterised by STM experiments. On these terraces, we observed a strong increase of the nucleation density higher than two orders of magnitude compared to pristine silicon samples. Moreover, a preferential location of diamond nuclei along the steps is reported. This result is explained by the large surface diffusion length of carbon species compared to the terrace's width. Indeed, during the early stages of growth, oriented silicon carbide nano-crystals are observed with the relationship SiC(220)//Si(220)

In situ study of the initial stages of diamond deposition on 3C-SiC (100) surfaces: Towards the mechanisms of diamond nucleation

The mechanisms involved in the diamond nucleation on 3C-SiC surfaces have been investigated using a sequential in situ approach using electron spectroscopies (XPS, XAES and ELS). Moreover, diamond crystals have been studied by HRSEM. The in situ nucleation treatment allows a high diamond nucleation density close to 4 x 10(10) cm(-2). During the in situ enhanced nucleation treatment under Plasma, a negative bias was applied to the sample. The formation of an amorphous carbon phase and the roughening of the 3C-SiC surface have been observed. The part of these competing mechanisms in diamond nucleation is discussed

The Low CO Content of the Extremely Metal Poor Galaxy I Zw 18

We present sensitive molecular line observations of the metal-poor blue compact dwarf I Zw 18 obtained with the IRAM Plateau de Bure interferometer. These data constrain the CO J=1-0 luminosity within our 300 pc (FWHM) beam to be L_CO < 1 \times 10^5 K km s^-1 pc^2 (I_CO < 1 K km s^-1), an order of magnitude lower than previous limits. Although I Zw 18 is starbursting, it has a CO luminosity similar to or less than nearby low-mass irregulars (e.g. NGC 1569, the SMC, and NGC 6822). There is less CO in I Zw 18 relative to its B-band luminosity, HI mass, or star formation rate than in spiral or dwarf starburst galaxies (including the nearby dwarf starburst IC 10). Comparing the star formation rate to our CO upper limit reveals that unless molecular gas forms stars much more efficiently in I Zw 18 than in our own galaxy, it must have a very low CO-to-H_2 ratio, \sim 10^-2 times the Galactic value. We detect 3mm continuum emission, presumably due to thermal dust and free-free emission, towards the radio peak.Comment: 5 pages in emulateapj style, accepted by the Astrophysical Journa

Star Formation in the Extreme Outer Galaxy: Digel Cloud 2 Clusters

As a first step for studying star formation in the extreme outer Galaxy (EOG), we obtained deep near-infrared images of two embedded clusters at the northern and southern CO peaks of Cloud 2, which is one of the most distant star forming regions in the outer Galaxy (galactic radius R_g ~ 19 kpc). With high spatial resolution (FWHM ~ 0".35) and deep imaging (K ~ 21 mag) with the IRCS imager at the Subaru telescope, we detected cluster members with a mass detection limit of < 0.1 M_{sun}, which is well into the substellar regime. These high quality data enables a comparison of EOG to those in the solar neighborhood on the same basis for the first time. Before interpreting the photometric result, we have first constructed the NIR color-color diagram (dwarf star track, classical T Tauri star (CTTS) locus, reddening law) in the Mauna Kea Observatory filter system and also for the low metallicity environment since the metallicity in EOG is much lower than those in the solar neighborhood. The estimated stellar density suggests that an ``isolated type'' star formation is ongoing in Cloud 2-N, while a ``cluster type'' star formation is ongoing in Cloud 2-S. Despite the difference of the star formation mode, other characteristics of the two clusters are found to be almost identical: (1) K-band luminosity function (KLF) of the two clusters are quite similar, as is the estimated IMF and ages (~ 0.5--1 Myr) from the KLF fitting, (2) the estimated star formation efficiencies (SFEs) for both clusters are typical compared to those of embedded clusters in the solar neighborhood (~ 10 %). The similarity of two independent clusters with a large separation (~ 25 pc) strongly suggest that their star formation activities were triggered by the same mechanism, probably the supernova remnant (GSH 138-01-94).Comment: 14pages, 11 figures; Accepted for publication in Ap

Electronic and physico-chemical properties of nanmetric boron delta-doped diamond structures

Heavily boron doped diamond epilayers with thicknesses ranging from 40 to less than 2 nm and buried between nominally undoped thicker layers have been grown in two different reactors. Two types of [100]-oriented single crystal diamond substrates were used after being characterized by X-ray white beam topography. The chemical composition and thickness of these so-called deltadoped structures have been studied by secondary ion mass spectrometry, transmission electron microscopy, and spectroscopic ellipsometry. Temperature-dependent Hall effect and four probe resistivity measurements have been performed on mesa-patterned Hall bars. The temperature dependence of the hole sheet carrier density and mobility has been investigated over a broad temperature range (6K<T<450 K). Depending on the sample, metallic or non-metallic behavior was observed. A hopping conduction mechanism with an anomalous hopping exponent was detected in the non-metallic samples. All metallic delta-doped layers exhibited the same mobility value, around 3.660.8 cm2/Vs, independently of the layer thickness and the substrate type. Comparison with previously published data and theoretical calculations showed that scattering by ionized impurities explained only partially this low common value. None of the delta-layers showed any sign of confinement-induced mobility enhancement, even for thicknesses lower than 2 nm.14 page

Coastal Observations of Weather Features in Senegal during the AMMA SOP-3 Period

During 15 August through 30 September 2006, ground and aircraft measurements were obtained from a multi-national group of students and scientists in Senegal. Key measurements were aimed at investigating and understanding precipitation processes, thermodynamic and dynamic environmental conditions, cloud, aerosol and microphysical processes and spaceborne sensors (TRMM, CloudSat/Calipso) validation. Ground and aircraft instruments include: ground based polarimetric radar, disdrometer measurements, a course and a high-density rain gauge network, surface chemical measurements, a 10 m flux tower, broadband IR, solar and microwave measurements, rawinsonde and radiosonde measurements, FA-20 dropsonde, in situ microphysics and cloud radar measurements. Highlights during SOP3 include ground and aircraft measurements of squall lines, African Easterly Waves (AEWs), Saharan Air Layer advances into Senegal, and aircraft measurements of AEWs -- including the perturbation that became Hurricane Isaac

Measurement of the top quark-pair production cross section with ATLAS in pp collisions at \sqrt{s}=7\TeV

A measurement of the production cross-section for top quark pairs(\ttbar) in $pp$ collisions at \sqrt{s}=7 \TeV is presented using data recorded with the ATLAS detector at the Large Hadron Collider. Events are selected in two different topologies: single lepton (electron $e$ or muon $\mu$) with large missing transverse energy and at least four jets, and dilepton ($ee$, $\mu\mu$ or $e\mu$) with large missing transverse energy and at least two jets. In a data sample of 2.9 pb-1, 37 candidate events are observed in the single-lepton topology and 9 events in the dilepton topology. The corresponding expected backgrounds from non-\ttbar Standard Model processes are estimated using data-driven methods and determined to be $12.2 \pm 3.9$ events and $2.5 \pm 0.6$ events, respectively. The kinematic properties of the selected events are consistent with SM \ttbar production. The inclusive top quark pair production cross-section is measured to be \sigmattbar=145 \pm 31 ^{+42}_{-27} pb where the first uncertainty is statistical and the second systematic. The measurement agrees with perturbative QCD calculations.Comment: 30 pages plus author list (50 pages total), 9 figures, 11 tables, CERN-PH number and final journal adde

Inclusive search for same-sign dilepton signatures in pp collisions at root s=7 TeV with the ATLAS detector

An inclusive search is presented for new physics in events with two isolated leptons (e or mu) having the same electric charge. The data are selected from events collected from p p collisions at root s = 7 TeV by the ATLAS detector and correspond to an integrated luminosity of 34 pb(-1). The spectra in dilepton invariant mass, missing transverse momentum and jet multiplicity are presented and compared to Standard Model predictions. In this event sample, no evidence is found for contributions beyond those of the Standard Model. Limits are set on the cross-section in a fiducial region for new sources of same-sign high-mass dilepton events in the ee, e mu and mu mu channels. Four models predicting same-sign dilepton signals are constrained: two descriptions of Majorana neutrinos, a cascade topology similar to supersymmetry or universal extra dimensions, and fourth generation d-type quarks. Assuming a new physics scale of 1 TeV, Majorana neutrinos produced by an effective operator V with masses below 460 GeV are excluded at 95% confidence level. A lower limit of 290 GeV is set at 95% confidence level on the mass of fourth generation d-type quarks

Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC

The uncertainty on the calorimeter energy response to jets of particles is derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the calorimeter response to single isolated charged hadrons is measured and compared to the Monte Carlo simulation using proton-proton collisions at centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009 and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter response to specific types of particles (positively and negatively charged pions, protons, and anti-protons) is measured and compared to the Monte Carlo predictions. Finally, the jet energy scale uncertainty is determined by propagating the response uncertainty for single charged and neutral particles to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3% for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table, submitted to European Physical Journal

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal