Organic Photovoltaic Modules Installation: Italy and Algeria Case Studies

We here report our latest achievements regarding some installations of ASCA® by ARMOR Organic Photovoltaic Modules realized by roll to roll printing. The performances of ASCA® OPV Modules were measured in two sites, in Italy and in Algeria, and monitored over time. We found that 10-20 kWh/m2 of total irradiation are needed to reach nominal performances due to photo-stabilization behavior. Furthermore, a 1.15 kW OPV power plant was realized, vertically integrated on a building wall, and measurements data were collected for each string. Special attention is paid to compare, in terms of energy yield (kWh/kWp), the OPV Plant with a c-Si PV Plant, already present on the same site: OPV showed a gain of 12% on energy yield during the monitoring period

Biodegradation of Olive Mill Wastewater by Trichosporon Cutaneum and Geotrichum Candidum

Olive oil production generates large volumes of wastewater. These wastewaters are characterised by high chemical oxygen demand (COD), high content of microbial growth-inhibiting compounds such as phenolic compounds and tannins, and dark colour. The aim of this study was to investigate biodegradation of olive mill wastewater (OMW) by yeasts Trichosporon cutaneum and Geotrichum candidum. The yeast Trichosporon cutaneum was used because it has a high potential to biodegrade phenolic compounds and a wide range of toxic compounds. The yeast Geotrichum candidum was used to see how successful it is in biodegrading compounds that give the dark colour to the wastewater. Under aerobic conditions, Trichosporon cutaneum removed 88 % of COD and 64 % of phenolic compounds, while the dark colour remained. Geotrichum candidum grown in static conditions reduced COD and colour further by 77 % and 47 %, respectively. This investigation has shown that Trichosporon cutaneum under aerobic conditions and Geotrichum candidum under facultative anaerobic conditions could be used successfully in a two-step biodegradation process. Further investigation of OMW treatment by selected yeasts should contribute to better understanding of biodegradation and decolourisation and should include ecotoxicological evaluation of the treated OMW.Tijekom proizvodnje maslinova ulja nastaju velike količine otpadne vode. Karakterizira je visoka kemijska potrošnja kisika (KPK), visoka koncentracija sastojaka koji inhibiraju rast mikroorganizama, poput fenolnih spojeva i tanina i tamna boja. Cilj ovog rada je bio istražiti biorazgradnju otpadne vode iz procesa proizvodnje maslinova ulja s pomoću kvasaca Trichosporon cutaneum i Geotrichum candidum. Kvasac Trichosporon cutaneum u ovom je istraživanju uporabljen zbog svog visokog potencijala za biorazgradnju fenolnih i drugih toksičnih spojeva. Kvasac Geotrichum candidum uporabljen je kako bi se istražilo koliko je uspješan u biorazgradnji spojeva koji otpadnoj vodi daju tamnu boju. Pri aerobnim uvjetima Trichosporon cutaneum uklonio je 88 % KPK i 64 % fenolnih spojeva, dok tamna boja otpadne vode preostaje. Geotrichum candidum u statičkim je uvjetima smanjio KPK i boju za 77 %, odnosno 47 %. Ovo je istraživanje pokazalo da Trichosporon cutaneum pri aerobnim uvjetima i Geotrichum candidum pri fakultativno anaerobnim uvjetima mogu biti uspješno uporabljeni u dvostupanjskom procesu biorazgradnje. Daljnje istraživanje obrade otpadne vode iz procesa proizvodnje maslinova ulja s pomoću odabranih kvasaca trebalo bi pridonijeti boljem razumijevanju biorazgradnje i uklanjanju boje i trebalo bi biti provedeno zajedno sa ekotoksikološkim vrednovanjem obrađene otpadne vode

Removal of phenolic compounds in olive mill wastewater by silica-alginate-fungi biocomposites

This study aims to attempt a treatment strategy based on fungi immobilized on silica-alginate (biocomposites) for removal of phenolic compounds in olive oil mill wastewater (OMW), OMW supplemented (OMWS) with phenolic compounds and water supplemented (WS) with phenolic compounds, thus decreasing its potential impact in the receiving waters. Active (alive) or inactive (death by sterilization) Pleurotus sajor caju was encapsulated in alginate beads. Five beads containing active and inactive fungus were placed in a mold and filled with silica hydrogel (biocomposites). The biocomposites were added to batch reactors containing the OMW, OMWS and WS. The treatment of OMW, OMWS and WS by active and inactive biocomposites was performed throughout 28 days at 25 C. The efficiency of treatment was evaluated by measuring the removal of targeted organic compounds, chemical oxygen demand (COD) and relative absorbance ratio along the time. Active P. sajor caju biocomposites were able to remove 64.6–88.4 % of phenolic compounds from OMW and OMWS and 91.8–97.5 % in water. Furthermore, in the case of OMW there was also a removal of 30.0–38.1 % of fatty acids, 68.7 % of the sterol and 35 % of COD. The silica–alginate–fungi biocomposites showed a high removal of phenolic compounds from OMW and water. Furthermore, in the application of biocomposites to the treatment of OMW it was observed also a decrease on the concentration of fatty acids and sterols as well as a reduction on the COD