Satellite-based characterization of climatic conditions before large-scale general flowering events in Peninsular Malaysia

General flowering (GF) is a unique phenomenon wherein, at irregular intervals, taxonomically diverse trees in Southeast Asian dipterocarp forests synchronize their reproduction at the community level. Triggers of GF, including drought and low minimum temperatures a few months previously has been limitedly observed across large regional scales due to lack of meteorological stations. Here, we aim to identify the climatic conditions that trigger large-scale GF in Peninsular Malaysia using satellite sensors, Tropical Rainfall Measuring Mission (TRMM) and Moderate Resolution Imaging Spectroradiometer (MODIS), to evaluate the climatic conditions of focal forests. We observed antecedent drought, low temperature and high photosynthetic radiation conditions before large-scale GF events, suggesting that large-scale GF events could be triggered by these factors. In contrast, we found higher-magnitude GF in forests where lower precipitation preceded large-scale GF events. GF magnitude was also negatively influenced by land surface temperature (LST) for a large-scale GF event. Therefore, we suggest that spatial extent of drought may be related to that of GF forests, and that the spatial pattern of LST may be related to that of GF occurrence. With significant new findings and other results that were consistent with previous research we clarified complicated environmental correlates with the GF phenomenon

Selective formation of large-grained, (100)- or (111)-oriented Si on glass by Al-induced layer exchange

By controlling the Si thickness and the annealing temperature used for Al-induced crystallization, we controlled the fraction of (100) and (111) orientations of polycrystalline Si (poly-Si) grains grown on glass. Changing the proportions of crystal orientation strongly influenced the average grain size of the poly-Si layer. By growing a 99% (111)-oriented poly-Si layer, formed with a 50-nm-thick Si layer at 375 °C, we produced a Si layer with grains nearly 40 μm in size. We discuss the growth mechanism from the perspective of competition between (100)- and (111)-oriented nuclei. This achievement holds promise for fabricating high-efficiency thin-film solar cells on inexpensive glass substrates

Chlorine Isotopes: As a Possible Tracer of Fluid/Bio-Activities on Mars and a Progress Report on Chlorine Isotope Analysis by TIMs

Significantly large mass fractionations between chlorine isotopes (Cl-35, Cl-37) have been reported for terrestrial materials including both geological samples and laboratory materials. Also, the chlorine isotopic composition can be used as a tracer for early solar system processes. Moreover, chlorine is ubiquitous on the Martian surface. Typical chlorine abundances in Gusev soils are approx.0.5 %. The global surface average chlorine abundance also is approx.0.5 %. Striking variations among outcrop rocks at Meridiani were reported with some chlorine abundances as high as approx.2%. Characterizing conditions under which chlorine isotopic fractionation may occur is clearly of interest to planetary science. Thus, we have initiated development of a chlorine isotopic analysis technique using TIMS at NASA-JSC. We present here a progress report on the current status of development at JSC and discuss the possible application of chlorine isotopic analysis to Martian meteorites in a search for fluid- and possibly biological activity on Mars

Very high quality factor measured in annealed fused silica

We present the results of quality factor measurements for rod samples made of fused silica. To decrease the dissipation we annealed our samples. The highest quality factor that we observed was $Q=(2.03\pm0.01)\times10^8$ for a mode at 384 Hz. This is the highest published value of $Q$ in fused silica measured to date.Comment: 8 pages, 2 figure

A high stability semiconductor laser system for a 88^{88}Sr-based optical lattice clock

We describe a frequency stabilized diode laser at 698 nm used for high resolution spectroscopy of the 1S0-3P0 strontium clock transition. For the laser stabilization we use state-of-the-art symmetrically suspended optical cavities optimized for very low thermal noise at room temperature. Two-stage frequency stabilization to high finesse optical cavities results in measured laser frequency noise about a factor of three above the cavity thermal noise between 2 Hz and 11 Hz. With this system, we demonstrate high resolution remote spectroscopy on the 88Sr clock transition by transferring the laser output over a phase-noise-compensated 200 m-long fiber link between two separated laboratories. Our dedicated fiber link ensures a transfer of the optical carrier with frequency stability of 7 \cdot 10^{-18} after 100 s integration time, which could enable the observation of the strontium clock transition with an atomic Q of 10^{14}. Furthermore, with an eye towards the development of transportable optical clocks, we investigate how the complete laser system (laser+optics+cavity) can be influenced by environmental disturbances in terms of both short- and long-term frequency stability.Comment: 9 pages, 9 figures, submitted to Appl. Phys.

Magnetization of alpha\u27 iron nitride produced through the fcc->bct martensitic transformation in high magnetic field

The gamma iron nitride (nitrogen austenite) was subjected to high magnetic field process in order to drive the fcc-->bct martensitic transformation. Molar fraction of martensite monotonically increased with increasing the magnetic field and reached 94% at 35 T. With a combination of magnetization and 57Fe Mössbauer spectroscopy data, magnetization of bulk processed alpha[prime] phase with 9.6 at. % N is determined to be 229 emu/g, the same as that for dc sputtered thin films

Surface patterning of carbon nanotubes can enhance their penetration through a phospholipid bilayer

Nanotube patterning may occur naturally upon the spontaneous self-assembly of biomolecules onto the surface of single-walled carbon nanotubes (SWNTs). It results in periodically alternating bands of surface properties, ranging from relatively hydrophilic to hydrophobic, along the axis of the nanotube. Single Chain Mean Field (SCMF) theory has been used to estimate the free energy of systems in which a surface patterned nanotube penetrates a phospholipid bilayer. In contrast to un-patterned nanotubes with uniform surface properties, certain patterned nanotubes have been identified that display a relatively low and approximately constant system free energy (10 kT) as the nanotube traverses through the bilayer. These observations support the hypothesis that the spontaneous self-assembly of bio-molecules on the surface of SWNTs may facilitate nanotube transduction through cell membranes.Comment: Published in ACS Nano http://pubs.acs.org/doi/abs/10.1021/nn102763

Making optical atomic clocks more stable with 10−1610^{-16} level laser stabilization

The superb precision of an atomic clock is derived from its stability. Atomic clocks based on optical (rather than microwave) frequencies are attractive because of their potential for high stability, which scales with operational frequency. Nevertheless, optical clocks have not yet realized this vast potential, due in large part to limitations of the laser used to excite the atomic resonance. To address this problem, we demonstrate a cavity-stabilized laser system with a reduced thermal noise floor, exhibiting a fractional frequency instability of $2 \times 10^{-16}$. We use this laser as a stable optical source in a Yb optical lattice clock to resolve an ultranarrow 1 Hz transition linewidth. With the stable laser source and the signal to noise ratio (S/N) afforded by the Yb optical clock, we dramatically reduce key stability limitations of the clock, and make measurements consistent with a clock instability of $5 \times 10^{-16} / \sqrt{\tau}$

Nature of Phase Transitions of Superconducting Wire Networks in a Magnetic Field

We study $I$-$V$ characteristics of periodic square Nb wire networks as a function of temperature in a transverse magnetic field, with a focus on three fillings 2/5, 1/2, and 0.618 that represent very different levels of incommensurability. For all three fillings, a scaling behavior of $I$-$V$ characteristics is found, suggesting a finite temperature continuous superconducting phase transition. The low-temperature $I$-$V$ characteristics are found to have an exponential form, indicative of the domain-wall excitations.Comment: 5 pages, also available at http://www.neci.nj.nec.com/homepages/tang.htm

PEG Branched Polymer for Functionalization of Nanomaterials with Ultralong Blood Circulation

Nanomaterials have been actively pursued for biological and medical applications in recent years. Here, we report the synthesis of several new poly(ethylene glycol) grafted branched-polymers for functionalization of various nanomaterials including carbon nanotubes, gold nanoparticles (NP) and gold nanorods (NRs), affording high aqueous solubility and stability for these materials. We synthesize different surfactant polymers based upon poly-(g-glutamic acid) (gPGA) and poly(maleic anhydride-alt-1-octadecene) (PMHC18). We use the abundant free carboxylic acid groups of gPGA for attaching lipophilic species such as pyrene or phospholipid, which bind to nanomaterials via robust physisorption. Additionally, the remaining carboxylic acids on gPGA or the amine-reactive anhydrides of PMHC18 are then PEGylated, providing extended hydrophilic groups, affording polymeric amphiphiles. We show that single-walled carbon nanotubes (SWNTs), Au NPs and NRs functionalized by the polymers exhibit high stability in aqueous solutions at different pHs, at elevated temperatures and in serum. Morever, the polymer-coated SWNTs exhibit remarkably long blood circulation (t1/2 22.1 h) upon intravenous injection into mice, far exceeding the previous record of 5.4 h. The ultra-long blood circulation time suggests greatly delayed clearance of nanomaterials by the reticuloendothelial system (RES) of mice, a highly desired property for in vivo applications of nanomaterials, including imaging and drug delivery