Dioxin-like compounds in Australian sewage sludge - Review and national survey

An Australian survey of dioxin-like compounds in sewage sludge was conducted in two parts (a) a national survey, and (b) a time-study. All sewage sludge samples analysed as part of these studies had low overall concentrations of dioxin-like compounds. Out of 37 samples, all except one, were within the reported concentration range of soil within the Australian environment. The mean concentration of dioxin-like compounds in the Australian sewage sludge survey of 2006 was found to be 5.6 (s.d. 4.5) ng WHO05 TEQ kg-1 (n = 14) and were within the range of 1.2-15.3 ng WHO05 TEQ kg-1. All the Australian sewage sludge samples cited in these studies were below the Victorian EPA ''investigation limit'' of 50 ng WHO98 TEQ kg-1, and well below the European proposed guidelines of 100 ng I-TEQ kg-1. The burden of dioxin-like compounds in Australian sewage sludge is low and its land application as biosolids is not likely to pose a problem. A general positive relationship was found between population of the town producing the waste and both dioxin-like PCDD/Fs and dioxin-like PCBs. The one exception to this trend was sludge from a town that had a history of smelting and had a relatively high burden of dioxin-like compounds. Sludge from one rural WWTP also had a higher burden of dioxin-like compounds. The treatment plant services a geographically isolated town with a low population and no known emitters of dioxin-like compounds. However, this sample also had a relatively high burden of dioxin-like PCBs, which could be the source of the dioxin-like PCDD/Fs found in this sludge. The time study analyzing sludges from three WWTP from the same city between the years 2002 and 2006 found no apparent difference between WWTPs, but a statistically significant decline of 1.49 ng WHO05 TEQ kg-1 per year. Also, a comprehensive review of the scientific literature, presents typical levels and sources of dioxin-like compounds in international sewage sludges

Polybrominated diphenyl ethers and polybrominated biphenyls in Australian sewage sludge

This paper presents a brief review of the international scientific literature of polybrominated diphenyl ethers (PBDEs) and polybrominated biphenyls (PBBs) in sewage sludge and a survey of these compounds in sewage sludge from 16 Australian wastewater treatment plants (WWTPs). The ?PBDE mean concentration in the Australian study was 1137 ?g kg-1 dry weight (d.w.) (s.d. 1116) and ranged between 5 and 4 230 ?g kg-1 d.w. The urban mean of 1308 ?g kg-1 (s.d. 1320) and the rural mean of 911 ?g kg-1 (s.d. 831) are not statistically different and are similar to levels in European sludges. Principal components analysis was performed on the data set and revealed that 76% of the data variation could be explained by two components that corresponded to overall concentration of the pentaBDE and the decaBDE commercial formulations. An analysis of variance was performed comparing PBDEs levels at three WWTPs over the years 2005 and 2006, finding differences between treatment plants (BDE-47) but no significant difference in PBDE levels in the years 2005 and 2006. Low levels of BB-153 were detected in all samples of this survey (n = 16); mean 0.6 ?g kg-1 d.w. (s.d. 0.5). This compound has rarely been reported in any other study of sewage sludges undertaken outside Australia. This work highlights the need for a risk assessment of PBDEs in sewage sludge when used for land application, taking into account typical levels found in Australian sludges and soils

Investigating the distribution of polybrominated diphenyl ethers through an Australian wastewater treatment plant

The aim of this study was to quantify the amount of polybrominated diphenyl ethers (PBDEs) released into the environment (biosolids, effluent) from a conventional Australian activated sludge treatment wastewater treatment plant (WWTP). The concentration of PBDE congeners was measured at various treatment stages and included four aqueous samples (raw, primary, secondary and tertiary effluents) and three sludges (primary, secondary and lime stabilized biosolids), collected at three sampling events over the course of the experiment (29 days). Semi-permeable membrane devices (SPMDs) were also installed for the duration of the experiment, the first time that SPMDs have been used to measure PBDEs in a WWTP. Over 99% of the PBDEs entering the WWTP were removed through the treatment processes, principally by sedimentation. The main congeners detected were BDE 47, 99 and 209, which are characteristic of the two major commercial formulations viz penta-BDE and deca-BDE. All the PBDE congeners measured were highly correlated with each other, suggesting a similar origin. In this case, the PBDEs are thought to be from domestic sources since domestic wastewater is the main contribution to the in-flow (approximately 95%). The mean concentration of SigmaPBDEs in chemically stabilized sewage sludge (biosolids) was 300microg kg(-1) dry weight. It is calculated that 2.3+/-0.3kg of PBDEs are disposed of each year with biosolids generated from the WWTP. If all Australian sewage sludge is contaminated to at least this concentration then at least 110kg of PBDEs are associated with Australian sewage sludge annually. Less than 10g are released annually into the environment via ocean outfall and field irrigation; this level of contamination is unlikely to pose risk to humans or the environment. The environmental release of treated effluent and biosolids is not considered a large source of PBDE environmental emissions compared to the quantities used annually in Australia

Clinical diagnostic utility of IP-10 and LAM antigen levels for the diagnosis of tuberculous pleural effusions in a high burden setting

Background: Current tools for the diagnosis of tuberculosis pleural effusions are sub-optimal. Data about the value of new diagnostic technologies are limited, particularly, in high burden settings. Preliminary case control studies have identified IFN-γ-inducible-10kDa protein (IP-10) as a promising diagnostic marker; however, its diagnostic utility in a day-to-day clinical setting is unclear. Detection of LAM antigen has not previously been evaluated in pleural fluid. Methods: We investigated the comparative diagnostic utility of established (adenosine deaminase [ADA]), more recent (standardized nucleic-acid-amplification-test [NAAT]) and newer technologies (a standardized LAM mycobacterial antigendetection assay and IP-10 levels) for the evaluation of pleural effusions in 78 consecutively recruited South African tuberculosis suspects. All consenting participants underwent pleural biopsy unless contra-indicated or refused. The reference standard comprised culture positivity for M. tuberculosis or histology suggestive of tuberculosis. Principal Findings: Of 74 evaluable subjects 48, 7 and 19 had definite, probable and non-TB, respectively. IP-10 levels were significantly higher in TB vs non-TB participants (p<0.0001). The respective outcomes [sensitivity, specificity, PPV, NPV %] for the different diagnostic modalities were: ADA at the 30 IU/L cut-point [96; 69; 90; 85], NAAT [6; 93; 67; 28], IP-10 at the 28,170 pg/ml ROC-derived cut-point [80; 82; 91; 64], and IP-10 at the 4035 pg/ml cut-point [100; 53; 83; 100]. Thus IP-10, using the ROC-derived cut-point, missed ~20% of TB cases and mis-diagnosed ~20% of non-TB cases. By contrast, when a lower cut-point was used a negative test excluded TB. The NAAT had a poor sensitivity but high specificity. LAM antigendetection was not diagnostically useful. Conclusion: Although IP-10, like ADA, has sub-optimal specificity, it may be a clinically useful rule-out test for tuberculous pleural effusions. Larger multi-centric studies are now required to confirm our findings

Educating Health Professionals about Disability: A Review of Interventions

Health professionals need to understand the human rights and health needs of disabled people. This review of evidence on interventions demonstrates that a range of often innovative approaches have been trialled. Lectures by faculty are less effective in changing attitudes than contact with disabled people themselves. Existing examples of good practice need to be scaled up, and better and more long-term evaluations of impact are required

Shaping electron wave functions in a carbon nanotube with a parallel magnetic field

A magnetic field, through its vector potential, usually causes measurable changes in the electron wave function only in the direction transverse to the field. Here we demonstrate experimentally and theoretically that in carbon nanotube quantum dots, combining cylindrical topology and bipartite hexagonal lattice, a magnetic field along the nanotube axis impacts also the longitudinal profile of the electronic states. With the high (up to 17T) magnetic fields in our experiment the wave functions can be tuned all the way from "half-wave resonator" shape, with nodes at both ends, to "quarter-wave resonator" shape, with an antinode at one end. This in turn causes a distinct dependence of the conductance on the magnetic field. Our results demonstrate a new strategy for the control of wave functions using magnetic fields in quantum systems with nontrivial lattice and topology.Comment: 5 figure