TORCH: A Cherenkov Based Time-of-Flight Detector

TORCH is a novel high-precision time-of-flight detector suitable for large area applications and covering the momentum range up to 10 GeV/c. The concept uses Cherenkov photons produced in a fused silica radiator which are propagated to focussing optics coupled to fast photodetectors. For this purpose, custom MCP-PMTs are being produced in collaboration with industrial partners. The development is divided into three phases. Phase 1 addresses the lifetime requirements for TORCH, Phase 2 will customize the MCP-PMT granularity and Phase 3 will deliver prototypes that meet the TORCH requirements. Phase 1 devices have been successfully delivered and initial tests show stable gain performance for integrated anode current >5 C/cm2 and a single photon time resolution of ≤ 30 ps. Initial simulations indicate the single photon timing resolution of the TORCH detector will be ∼70 ps

The TORCH PMT: a close packing, multi-anode, long life MCP-PMT for Cherenkov applications

Photek (U.K.) and the TORCH collaboration are undertaking a three year development program to produce a novel square MCP-PMT for single photon detection. The TORCH detector aims to provide particle identification in the 2–10 GeV/c momentum range, using a Time-of-Flight method based on Cherenkov light. It is a stand-alone R&D project with possible application in LHCb, and has been proposed for the LHCb Upgrade. The Microchannel Plate (MCP) detector will provide a single photon timing accuracy of 40 ps, and its development will include the following properties: (i) Long lifetime up to at least 5 C/cm2; (ii) Multi-anode output with a spatial resolution of 6 mm and 0.4 mm respectively in the horizontal and vertical directions, incorporating a novel charge-sharing technique; (iii) Close packing on two opposing sides with an active area fill factor of 88% in the horizontal direction. Results from simulations modelling the MCP detector performance factoring in the pulse height variation from the detector, NINO threshold levels and potential charge sharing techniques that enhance the position resolution beyond the physical pitch of the pixel layout will be discussed. Also, a novel method of coupling the MCP-PMT output pads using Anisotropic Conductive Film (ACF) will be described. This minimises parasitic input capacitance by allowing very close proximity between the frontend electronics and the MCP detector

Measurement of D*+/- diffractive cross sections in photoproduction at HERA

The first measurement of D*+/- meson diffractive photoproduction cross sections has been performed with the ZEUS detector at the HERA $ep$ collider, using an integrated luminosity of 38 pb^-1. The measurement has been performed for photon--proton center-of-mass energies in the range 130 < W < 280 GeV and photon virtualities Q^2 < 1 GeV^2. D*+/- mesons have been reconstructed with p_T(D*)>2 GeV and -1.5 D^0 \pi^+_s with D^0 --> K-\pi^+ (+c.c.). The diffractive component has been selected with 0.001<x_Pom<0.018. The measured diffractive cross section in this kinematic range is: \sigma_(ep --> e'D*Xp') = 0.74 +/- 0.21 (stat.)^{+0.27}_{-0.18} (syst.) +/-0.16 (p. diss.) ~nb (ZEUS preliminary). Measured integrated and differential cross sections have been compared to theoretical expectations.Comment: LaTeX2e, 10 pages, 6 Postscript figures. Talk given at the Russian Academy of Science (RAS) Nuclear Physics 2000 Conference, Moscow, Russia, November 27-December 2, 2000. To be published in Rus. Nucl. Phys. (Ya.F.), Proceedings of RAS Nucl. Phys. 2000 Con

Exclusive Lambda_b -> Lambda l^+ l^- decay in two Higgs doublet model

Rare Lambda_b -> Lambda l^+ l^- decay is investigated in framework of general two Higgs doublet model, in which a new source of CP violation exists (model III). The polarization parameter, CP asymmetry and decay width are calculated. It is shown that CP asymmetry is a very sensitive tool for establishing model III.Comment: 16 pages, 3 figures, LaTeX formatte

Enhanced Radiation Hardness and Faster Front Ends for the Beetle Readout Chip

This paper summarizes the recent progress in the development of the 128 channel pipelined readout chip Beetle, which is intended for the silicon vertex detector, the inner tracker, the pile-up veto trigger and the RICH detectors of LHCb. Deficiencies found in the front end of the Beetle Version 1.0 and 1.1 chips resulted in the submissions of BeetleFE 1.1 and BeetleFE 1.2, while BeetleSR 1.0 implements test circuits to provide future Beetle chips with logic circuits hardened against single event upset (SEU). Section I. motivates the development of new front ends for the Beetle chip, and section II. summarizes their concepts and construction. Section III. reports preliminary results from the BeetleFE 1.1 and BeetleFE 1.2 chips, while section IV. describes the BeetleSR 1.0 chip. An outlook on future test and development of the Beetle chip is given in section V

Glass-Coated Beryllium Mirrors for the LHCb RICH1 Detector

The design, manufacture and testing of lightweight glass-coated beryllium spherical converging mirrors for the RICH1 detector of LHCb are described. The mirrors need to be lightweight to minimize the material budget and fluorocarbon-compatible to avoid degradation in the RICH1 C4F10 gas radiator. Results of the optical measurements for the small-sized prototypes and for the first full-sized prototype mirror are reported

Performance of the Beetle readout chip for LHCb

Beetle is a 128-channel readout chip, which will be used in the silicon vertex detector, the pile-up veto counters and the silicon tracker of the LHCb experiment at CERN. A further application of the Beetle chip is the readout of the LHCb RICH, in case it is equipped with multi-anode PMTs. The scope of this paper is the design changes leading to the latest version 1.3 of the Beetle readout chip. In addition, measurements on earlier versions and simulation results driving these changes are shown

Measurements of the branching fractions of B+→ppK+ decays

The branching fractions of the decay B+ → pp̄K+ for different intermediate states are measured using data, corresponding to an integrated luminosity of 1.0 fb-1, collected by the LHCb experiment. The total branching fraction, its charmless component Mpp̄ < 2.85 GeV/c2 and the branching fractions via the resonant cc̄ states η c(1S) and ψ(2S) relative to the decay via a J/ψ intermediate state are [Equation not available: see fulltext.] Upper limits on the B + branching fractions into the η c(2S) meson and into the charmonium-like states X(3872) and X(3915) are also obtained