336 research outputs found
Electroproduction, photoproduction, and inverse electroproduction of pions in the first resonance region
Methods are set forth for determining the hadron electromagnetic structure in
the sub--threshold timelike region of the virtual-photon ``mass'' and
for investigating the nucleon weak structure in the spacelike region from
experimental data on the process at low energies. These
methods are formulated using the unified description of photoproduction,
electroproduction, and inverse electroproduction of pions in the first
resonance region in the framework of the dispersion-relation model and on the
basis of the model-independent properties of inverse electroproduction.
Applications of these methods are also shown.Comment: The revised published version; Revtex4, 18 pages, 6 figure
Interplay among transversity induced asymmetries in hadron leptoproduction
In the fragmentation of a transversely polarized quark several left-right
asymmetries are possible for the hadrons in the jet. When only one unpolarized
hadron is selected, it exhibits an azimuthal modulation known as Collins
effect. When a pair of oppositely charged hadrons is observed, three
asymmetries can be considered, a di-hadron asymmetry and two single hadron
asymmetries. In lepton deep inelastic scattering on transversely polarized
nucleons all these asymmetries are coupled with the transversity distribution.
From the high statistics COMPASS data on oppositely charged hadron-pair
production we have investigated for the first time the dependence of these
three asymmetries on the difference of the azimuthal angles of the two hadrons.
The similarity of transversity induced single and di-hadron asymmetries is
discussed. A new analysis of the data allows to establish quantitative
relationships among them, providing for the first time strong experimental
indication that the underlying fragmentation mechanisms are all driven by a
common physical process.Comment: 6 figure
Measurement of the charged-pion polarisability
The COMPASS collaboration at CERN has investigated pion Compton scattering,
, at centre-of-mass energy below 3.5 pion
masses. The process is embedded in the reaction
, which is initiated by
190\,GeV pions impinging on a nickel target. The exchange of quasi-real photons
is selected by isolating the sharp Coulomb peak observed at smallest momentum
transfers, \,(GeV/). From a sample of 63\,000 events the
pion electric polarisability is determined to be $\alpha_\pi\ =\ (\,2.0\ \pm\
0.6_{\mbox{\scriptsize stat}}\ \pm\ 0.7_{\mbox{\scriptsize syst}}\,) \times
10^{-4}\,\mbox{fm}^3\alpha_\pi=-\beta_\pi$, which
relates the electric and magnetic dipole polarisabilities. It is the most
precise measurement of this fundamental low-energy parameter of strong
interaction, that has been addressed since long by various methods with
conflicting outcomes. While this result is in tension with previous dedicated
measurements, it is found in agreement with the expectation from chiral
perturbation theory. An additional measurement replacing pions by muons, for
which the cross-section behavior is unambigiously known, was performed for an
independent estimate of the systematic uncertainty.Comment: Published version: 9 pages, 3 figures, 1 tabl
Transverse-momentum-dependent Multiplicities of Charged Hadrons in Muon-Deuteron Deep Inelastic Scattering
A semi-inclusive measurement of charged hadron multiplicities in deep
inelastic muon scattering off an isoscalar target was performed using data
collected by the COMPASS Collaboration at CERN. The following kinematic domain
is covered by the data: photon virtuality (GeV/), invariant
mass of the hadronic system GeV/, Bjorken scaling variable in the
range , fraction of the virtual photon energy carried by the
hadron in the range , square of the hadron transverse momentum
with respect to the virtual photon direction in the range 0.02 (GeV/ (GeV/). The multiplicities are presented as a
function of in three-dimensional bins of , , and
compared to previous semi-inclusive measurements. We explore the
small- region, i.e. (GeV/), where
hadron transverse momenta are expected to arise from non-perturbative effects,
and also the domain of larger , where contributions from
higher-order perturbative QCD are expected to dominate. The multiplicities are
fitted using a single-exponential function at small to study
the dependence of the average transverse momentum on , and . The power-law behaviour of the
multiplicities at large is investigated using various
functional forms. The fits describe the data reasonably well over the full
measured range.Comment: 28 pages, 20 figure
Resonance Production and S-wave in at 190 GeV/c
The COMPASS collaboration has collected the currently largest data set on
diffractively produced final states using a negative pion
beam of 190 GeV/c momentum impinging on a stationary proton target. This data
set allows for a systematic partial-wave analysis in 100 bins of three-pion
mass, GeV/c , and in 11 bins of the reduced
four-momentum transfer squared, (GeV/c) . This
two-dimensional analysis offers sensitivity to genuine one-step resonance
production, i.e. the production of a state followed by its decay, as well as to
more complex dynamical effects in nonresonant production. In this paper,
we present detailed studies on selected partial waves with , , , , and . In these waves, we observe
the well-known ground-state mesons as well as a new narrow axial-vector meson
decaying into . In addition, we present the results
of a novel method to extract the amplitude of the subsystem with
in various partial waves from the
data. Evidence is found for correlation of the and
appearing as intermediate isobars in the decay of the known
and .Comment: 96 page
Leading-order determination of the gluon polarisation from semi-inclusive deep inelastic scattering data
Using a novel analysis technique, the gluon polarisation in the nucleon is
re-evaluated using the longitudinal double-spin asymmetry measured in the cross
section of semi-inclusive single-hadron muoproduction with photon virtuality
. The data were obtained by the COMPASS experiment at
CERN using a 160 GeV/ polarised muon beam impinging on a polarised LiD
target. By analysing the full range in hadron transverse momentum ,
the different -dependences of the underlying processes are separated
using a neural-network approach. In the absence of pQCD calculations at
next-to-leading order in the selected kinematic domain, the gluon polarisation
is evaluated at leading order in pQCD at a hard scale of . It is determined in three intervals
of the nucleon momentum fraction carried by gluons, , covering the
range ~ and does not exhibit a significant
dependence on . The average over the three intervals, at
, suggests that the gluon polarisation
is positive in the measured range.Comment: 14 pages, 6 figure
Respiratory Support with Limited Tidal Volume and Peak Pressure in Patients with Acute Respiratory Distress Syndrome
The paper presents the results of a study, which prove the advantages of artificial ventilation with a descending air flow on inspiration, tidal volume 6 ml/kg body weight; P peak < 30 cm H2O in showing its efficiency, by optimizing the parameters of the respiratory pattern, by improving gas exchange in the lung, by reducing the time of respiratory support, the length of stay in an intensive care unit, and mortality rates as compared with artificial square-wave air flow on inspiration, TV 12—15 ml/kg body weight; Ppeak tracheal >35 cm H2°
Shock-induced structures in copper
Shock loading of M3 copper within strain rate range of 5·10 6-5,7·10 6 s -1 reveals a nucleation of structural objects of 5-30 µm in diameter, which present the three dimensional frameworks composed from shear bands of 50-200 nm spacing. The structures are shown to be nucleated by means of interference of longitudinal and periphery release waves. Transition of the material into structure unstable state responsible for the shear banding happens when rate of change of the velocity variance at the mesoscale becomes higher than the rate of change of the mean particle velocity. The sites of nucleation of 3D-structures are speculated to be the staking faults generated under action of chaotic velocity pulsations relevant to dynamic deformation. The physical model for formation of 3D-structures takes into account the intersection of the partial dislocations and Lomer - Cottrell barriers
Multiplicities of charged kaons from deep-inelastic muon scattering off an isoscalar target
Precise measurements of charged-kaon multiplicities in deep inelastic scattering were performed. The results are presented in three-dimensional bins of the Bjorken scaling variable x, the relative virtual-photon energy y, and the fraction z of the virtual-photon energy carried by the produced hadron. The data were obtained by the COMPASS Collaboration by scattering 160 GeV muons off an isoscalar 6LiD target. They cover the kinematic domain View the MathML source in the photon virtuality, 0.0045 GeV/c2 in the invariant mass of the hadronic system. The results from the sum of the z -integrated K+ and K 12 multiplicities at high x point to a value of the non-strange quark fragmentation function larger than obtained by the earlier DSS fit
Модернизация грузовых тележек: установка поперечной связи
The authors offer design of transverse connection assembly in the bogie of type 18-100 of a cargo car. The aim is to eliminate lozenging of side frames, reduce intensity of sinuous movement, vibration load and wear of parts and assemblies, improve smoothness, as well as eliminate pendular oscillations of side frames with respect to their own longitudinal axes (thus facilitating also the operation mode of bearing units and cast bearing elements). Modernization of a bogie by mounting transverse connection assembly, as well as replacing axle bearings with cassette-type bearings and adapters of MIIT design with wear-resistant vibration absorbers, assumes to substantially increase guaranteed overhaul life of freight cars.Авторами предложено конструктивное исполнение поперечной связи в тележке модели 18-100. Цель - устранить забегания боковых рам, снизить интенсивность извилистого движения, вибронагруженность и износы деталей и узлов, улучшить плавность хода, а также устранить маятниковые колебания боковых рам относительно собственных продольных осей (тем самым облегчая еще и режим работы подшипниковых узлов и литых несущих элементов). Модернизация тележки путем установки поперечной связи и адаптеров МИИТ с износостойкими вибропоглатителями предполагает существенно увеличить гарантированный межремонтный пробег грузовых вагонов
- …
